• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.177-183
• /
• 2008

The typical heat-resisting rotor steels such as 2.25CrMo, 9CrMo and 12CrW steel were experimentally studied in order to understand their materials degradation under high temperature and pressure during the long-term service, and then use the basic studies for the structural health monitoring. In order to monitor the materials degradation, it was conducted by the isothermal aging for 2.25CrMo steel, creep-fatigue for 9CrMo steel and creep for 12Cr steel with the incremental step test. The ultrasonic wave properties, electrical resistivity and coercivity were interpreted in relation to microstructural changes at each material and showed strong sensitivity to the specific microstructural evolution.

• Earthquakes and Structures
• /
• v.18 no.5
• /
• pp.567-580
• /
• 2020

In this paper, irregularly designed planar reinforced concrete wall structures are investigated computationally. For this purpose, structures consisting of four regular and irregular models of short-order (two-class) and intermediate (five-class) types have been investigated. The probabilistic evaluation of seismic damage of these structures has been performed by using the incremental inelastic dynamic analysis to produce the seismic fragility curve at different levels of damage. The fragility curves are based on two classes of maximum damage indices and the Jeong-Nansha three-dimensional damage index. It was found that there is a significant increase in damage probability in irregular structures compared to regular ones. The rate of increase was higher in moderate and extensive damage levels. Also, the amount of damage calculated using the two damage indices shows that the Jeong-Nensha three-dimensional damage index in these types of structures provides superior results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.71-80
• /
• 2003

Though a nonlinear time history analysis may be provided to estimate more exactly the seismic performance of building structure, approximation methods are still needed in the aspect of practicality and simplicity, In converting a multi-story structure to an equivalent SDOF system, the mode vectors of the multi-story structure are assumed as the mode shape in elastic state regardless of elastic or elastic-plastic state. However, the characteristics of displacement mode are also changed after the yielding made in the structural elements, because the structure becomes inelastic in each incremental load step. In this research, a method of converting MDOF system to ESDOF system is presented by using nonlinear displacement mode considering the mode change of structures after the yielding. Also, the accuracy and efficiency of the method of the nonlinear displacement mode method of the estimate of seismic response of Mixed Building Structures were examined by comparing the displacements of the roof level of the multi-story building structures estimated from this converted displacement response of ESDOF with the displacement of the roof level through the nonlinear dynamic analysis of the multi-story building structures subjected to an actual earthquake excitation.

• Earthquakes and Structures
• /
• v.14 no.3
• /
• pp.215-227
• /
• 2018

Supplemental passive control devices are widely considered as an important tool to mitigate the dynamic response of a building under seismic excitation. Nevertheless, a systematic method for strategically placing dampers in the buildings is not prescribed in building codes and guidelines. Many deterministic and stochastic methods have been proposed by previous researchers to investigate the optimum distribution of the viscous dampers in the steel frames. However, the seismic performances of the retrofitted buildings that are under large earthquake intensity levels or near collapse state have not been evaluated by any seismic research. Recent years, an increasing number of studies utilize genetic algorithms (GA) to explore the complex engineering optimization problems. GA interfaced with nonlinear response history (NRH) analysis is considered as one of the most powerful and popular stochastic methods to deal with the nonlinear optimization problem of damper distribution. In this paper, the effectiveness and the efficiency of GA on optimizing damper distribution are first evaluated by strong ground motions associated with the collapse failure. A practical optimization framework using GA and NRH analysis is proposed for optimizing the distribution of the fluid viscous dampers within the moment resisting frames (MRF) regarding the improvements of large drifts under intensive seismic context. Both a 10-storey and a 20-storey building are involved to explore higher mode effect. A far-fault and a near-fault earthquake environment are also considered for the frames under different seismic intensity levels. To evaluate the improvements obtained from the GA optimization regarding the collapse performance of the buildings, Incremental Dynamic Analysis (IDA) is conducted and comparisons are made between the GA damper distribution and stiffness proportional damping distribution on the collapse probability of the retrofitted frames.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3383-3389
• /
• 2014

Background: Prostate cancer is rapidly increasing in Korea and professional societies have requested adding prostate specific antigen (PSA) testing to the National Cancer Screening Program (NCSP), but this started a controversy in Korea and neutral evidence on this issue is required more than ever. The purpose of this study was to provide economic evidence to the decision makers of the NCSP. Materials and Methods: A cost-utility analysis was performed on the adoption of PSA screening program among men aged 50-74-years in Korea from the healthcare system perspective. Several data sources were used for the cost-utility analysis, including general health screening data, the Korea Central Cancer Registry, national insurance claims data, and cause of mortality from the National Statistical Office. To solicit the utility index of prostate cancer, a face-to-face interview for typical men aged 40 to 69 was conducted using a Time-Trade Off method. Results: As a result, the increase of effectiveness was estimated to be very low, when adopting PSA screening, and the incremental cost effectiveness ratio (ICER) was analyzed as about 94 million KRW. Sensitivity analyses were performed on the incidence rate, screening rate, cancer stage distribution, utility index, and treatment costs but the results were consistent with the base analysis. Conclusions: Under Korean circumstances with a relatively low incidence rate of prostate cancer, PSA screening is not cost-effective. Therefore, we conclude that adopting national prostate cancer screening would not be beneficial until further evidence is provided in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1229-1237
• /
• 2013

In this study, the theory of spherical indentation based on incremental plasticity is extended to an indentation method for evaluating creep properties. Through finite element analysis (FEA), the point where the elastic strain effect is negligible and the creep strain gradient constant is taken as the optimum point for obtaining the equivalent strain rate and stress. Based on FE results for spherical indentation with various values of creep exponent and creep coefficient, we derive by regression an equation to calculate creep properties using two normalized variables. Finally a program is generated to calculate creep exponent and creep coefficient. With this method, we obtain from the load-depth curve creep exponents with an average error of less than 1.5 % and creep coefficients with an average error of less than 1.0 %.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.29-38
• /
• 2012

Software globalization is becoming more important worldwide but little is known about how globalization technologies are actually carried out in the Korean software industry. In this paper, we have designed Globalization Quality Management (GQM) framework and applied the framework to the industry domestically for the first time. GQM provides a structured and effective way for software organizations to adopt globalization practices and evaluate the results. GQM consists of three main components: 1) software quality management process, 2) globalization support model and 3) globalization assessment model. This framework also supports both plan-driven and iterative/incremental development methods. On the basis of the GQM, a survey study was conducted among software engineering professionals, gathering the data from 31 IT companies across 7 large-scale projects in Korea. The result indicate that the evaluation score for globalization capability is 2.47 and global readiness is 2.55 out of 5 points. Also It said that internationalized product design (32.9%) and global/local product requirements analysis (28%) are needed to be taken care of first.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.71-79
• /
• 2006

Address lookup is an essential function in the Internet routers, and it determines overall router performance. In this paper, we have thoroughly investigated the binary-search-based address lookup algorithms and proposed a new algorithm based on binary search on prefix lengths. Most of the existing binary search schemes perform binary search on prefix values, and hence the lookup speed is proportional to the length of prefixes or the log function of the number of prefixes. The previous algorithm based on binary search on prefix lengths has superior lookup performance than others. However, the algorithm requires very complicated pre-computation of markers and best matching prefixes in internal nodes since naive binary search is not possible in their scheme. This complicated pre-computation makes the composition of the routing table and incremental update very difficult. By using leaf-pushing, the proposed algorithm in this paper removes the complicated pre-computation of the Previous work in performing the binary search on prefix lengths. The performance evaluation results show that the proposed scheme has very good performance in lookup speed compared with previous works.

• Journal of Lipid and Atherosclerosis
• /
• v.5 no.1
• /
• pp.61-77
• /
• 2016

Objective: This study aims to analyze cost-effectiveness of two most-commonly used statins from the perspective of the Korean national health system. Methods: The scope of the analysis included rosuvastatin (5 mg, 10 mg, and 20 mg) and atorvastatin (10 mg, 20 mg, 40 mg, and 80 mg). Effectiveness was defined as percentage (%) and absolute (mg/dL) reductions of low-density lipoprotein cholesterol (LDL-C) from the baseline. They were derived from published randomized controlled studies for rosuvastatin and atorvastatin. Effectiveness was defined as reductions in LDL-C levels per mg dose of the drugs. The annual direct medical costs including drug acquisition costs and monitoring costs over the one-year time horizon were calculated for each alternative. The average cost-effectiveness ratios (ACERs) and incremental cost-effectiveness ratios (ICERs) for each statin dose were calculated. Results: The ACERs for all doses of rosuvastatin (5 mg, 10 mg, and 20 mg) were lower than those for all doses of atorvastatin (10 mg, 20 mg, 40 mg, and 80 mg). Rosuvastatin 10 mg was the most cost-effective statin for LDL-C reduction. In cost-effectiveness analyses for corresponding doses of rosuvastatin and atorvastatin, rosuvastatin was the superior strategy which suggests both higher effectiveness and lower costs than atorvastatin. However, we have to consider this analysis is highly influenced by current price of statins in each market. Conclusion: For reduction of LDL-C levels in Korean patients with dyslipidemia, rosuvastatin 10mg is the most cost-effective statin in the current Korean market.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.547-547
• /
• 2015

본 연구에서는 달천구간 (괴산댐~송동보)에서 어류 군집 (Fish Community)을 고려한 생태학적 최적유량 (Ecological Optimum Discharge)을 산정하였다. 이를 위해 유량증진방법론(IFIM: Instream Flow Incremental Methodology)을 기반으로 한 2차원 모형인 River-2D를 적용하여 수리해석 및 대상어종 (Target Fishes)에 대한 가중가용면적 (WUA: Weighted Usable Area)을 산정하였다. 모형 검증을 위해 김원 등 (2007)에 의해 수행된 과업구간 내 수위 및 유량 모니터링 자료를 활용하였으며, 하류경계조건은 김지성 등 (2007)에 의한 수위-유량 관계곡선식을 활용하였다. 또한 평저류량 조건에서의 조도높이 (Roughness Height) 산정을 위해 유량 및 하상재료의 영향을 고려할 수 있는 멱함수 및 반대수함수 형태의 조도계수 공식을 적용하였다. 모형검증 결과 River-2D에 의해 계산된 수위값이 모니터링값과 비교적 잘 일치함을 알 수 있었다. 대상유역에 대한 어류 모니터링 (에코리버21사업단, 2007~2010) 결과를 바탕으로, 과업지역내 우점종 (피라미), 아우점종 (쉬리 등 3개 어종), 멸종위기어종 (묵납자루)을 대상어종으로 선정하였으며, 대상어종에 대한 서식도적합도지수 (HSI, Habitat Suitability Index) 산정을 위해 IFASG (Instream Flow and Aquatic Systems Group) 방법 및 WDWF (Washington Department of Fish and Wildlife) 방법을 적용하였다. 수심, 유속, 하상재료 및 하상형상에 대한 서식도적합도지수가 5가지 대상어종에 대해 각각 산정되었으며, 복합적합도지수 (CSI : Combined Suitability Index)를 고려한 과업대상 위치별 어류의 발생확률이 모의되었다. 어류 군집에 대한 가중가용면적 (WUA)이 최대로 되는 생태학적 최적유량 산정 결과, Type I~III의 경우 모두 $10m^3/s$ 이하의 유량조건에 대해서 WUA가 최대값을 갖는 것을 확인할 수 있었으며, 납자루속의 어류 (Type III)의 WUA가 000 및 000속 (Type II)의 어류에 비해서 작은 유량에서 더 큰 값을 갖으며, $10m^3/$s 초과 유량에 대해서는 반대의 경향이 나타나는 것을 확인할 수 있었다.