• 한국결정성장학회지
• /
• 제2권1호
• /
• pp.10-19
• /
• 1992

Soft Ferrites 가운데 대표적인 자성재료로써 최근에 개발된 Mn-Zn Ferrite는 높은 초기투자율과 포화자속밀도, 낮은 손실계수를 갖고 있으며 또한, 단결정으로써의 기계적 특성이 우수하며 VTR Head의 소재로 사용되는 중요한 전자부품이다. melt를 수용하는 도가니를 사용치 않아 결정으로의 불순물 침입이 없으며 halogen lamp로부터 방출된 적외선을 열원으로 하여 한 곳에 초점을 이루어 온도구배를 크게 유지하여 결정성장을 이루는 Floating Zone(FZ)법에 의해 Ar 및 $O_2$혼합가스 분위기 하에서 직경 8mm의 Mn-Zn Ferrite 단결정을 육성하였다. 성장 중 용융대에서의 최고온도는 $1650^{\circ}C$ 온도를 유지하였고 결정성장 속도는 10mm/hr, 회전속도는 20 rpm 이었으며 성장방위를 확인하기 위해 Laue 분석 및 XRD, TEM을 이용, 결정의 상등을 분석하였으며 화학적인 etching을 하여 광학현미경을 통해 etch pits 형상을 관찰하였다. 그리고 양질의 결정을 얻기 위해 원료봉 직경에 따른 결정화 속도와 적정한 melt직경과 길이에 대한 상관관계를 찾아내었고 또한 성장계면의 양상에 대해 고찰하였다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1974년도 학술대회지
• /
• pp.101-113
• /
• 1974

The radioactive compound sodium $acetate-U-C^{14}$ (C-14 acetate) was administered to two- and four-year-old July and September American ginseng (Panax quinquefolium L.) plants and cuttings. The C-14 acetate uptake was approximately $99\%.$ The autoradiochromatograms suggest that the saponins(panaquilins) isolated by preparative thin-layer chromatography contained impurities, especially those isolated from the leaf and stem extracts. The root and fruit methanol extracts yielded relatively pure saponins. The large amounts of panaquilin B and its proximity to panaquilin C on preparative thin-layer plates resulted in some admixing. The average concentration $(\%$ plant dry weight) of semipurified saponins were high in the leaves $(13.8\%),$ compared to fruits $(9.8\%),\;stems\;(7.9\%)\;and\;roots\;(6.3\%).$ The average percentage of C-14 acetate incorporation into panaquilins was $4.8\%.$ The average percentage of C-14 acetate incorporation into panaquilins B and C was higher $(1.40\%\;and\;1.13\%,$ respectively) than that into panaquilin C, (d), G-1 and G-2 $(0.75\%,\;0.65\%,\;0.13\%\;and\;0.53\%,$ respectively). Panaquilin synthesis may be depending upon the part collection period and age of the plant. The average percentage of C-14 acetate incorporation into panaquilin B is high in roots $(0.58\%)\;and\;stems\;(0.48\%);$ that into panaquilins C and (d) high in leaves $(0.40\%\;and\;0.45\%,$ respectively); and that into panaquilin E high in roots and leaves $(0.55\%\and\;0.50\%,$ respectively). Panaquilin G-2 was synthesized in all parts of plants. The panaquilins appear to be biosynthesized more actively in July than September (exception-panaquilin G-l). Panaquilins B, C and G-1 may be biosynthesized more actively in four-year-old plants and panaquilins (d) and E more actively in two-year-old plants. The results from expectance with cuttings suggest that the panaquilins are synthesized de novo in the above-ground parts of ginseng plants, and that panaquilin G-l may be synthesized de novo in the leaf. It is known from the tissue culture studies that panaquilins are produced by leaf, stem and root callus tissues and callus-root cultures of American and Korean ginseng plants. Panaquilins may actively be synthesized de novo in most any cell or organ of the ginseng plants. It was verified that C-14 acetate was incorporated into the panaxadiol portions of the panaquilins of two-year-old plants (sp. act., 0.56 $m{\mu}Ci/mg$) and four-year-old plants (sp. act., 0.54 $m{\mu}Ci/mg$).

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• 생약학회지
• /
• 제5권2호
• /
• pp.111-124
• /
• 1974

방사성 동위 원소화합물 소디움 아세테이트$-V-C^{14}(C^{14}$-아세데이트)를 2년생과 4년생 7월, 9월 미국인삼(오갈피 나무과, Panax quinquefolium L.) 식물과 캇팅(Cutting) 에 각기 심지법에 의하여 투여하였다. $C^{14}$아세테이트 섭취율은 약 99%였다. 오토래디오크로매토그램은 제조적 박층 크로매토그래피로 분리한 사포닌들이 불순물을 함유하고 있음을 제시하였으며 특히 잎이나 줄기 엑기스에서 분리한 사포닌들에 불순물이 많이 섞여 있음을 알았다. 뿌리 및 과실 메타놀 엑기스는 상대적으로 순수한 사포닌들을 얻을 수 있다. 패나퀼린 B의 과량으로 인한 패나퀼린 C에 대한 패나퀼린 B의 꼬리는 제조적 박층 크로매토그래피에서 서로 혼교되는 결과를 얻었다. 일차 정제된 사포닌들의 평균 함량(건조 식물에 대한 %)은 과실(9.8%), 줄기(7.9%), 뿌리(6.3%)에 비하여 잎(13.8%)에 높았다. $C^{14}$아세테이트가 패나퀼린으로 인코포레이트되는 평균 %는 48%였다. 패나퀼린 B와 C로 $C^{14}$아세테이트가 인코포레이트되는 평균 %는 패나퀼린 C (0.75%), (d) (0.65%). G-1 (0.13%) G-2 (0.53%)보다 높았다. (패나퀼린 B 1.40%, C 1.13%). 패나퀼린 합성은 식물의 채취 부위, 채취 시기 및 연령에 따라 를린다고 사료된다. 패나퀼린 B 에 $C^{14}$아세테이트가 인코포레이트되는 평균 함량은 뿌리(0.58%)와 줄기(0.48%)에서 높았고, 패나퀼린 C(0.40%)와 (d) (0.45%)는 잎에서 높았고, 패나퀼린 E는 뿌리 (0.55%)와 잎(0.50%)에서 각기 높았다. 패나퀼린 G-2는 식물의 모든 부위에서 생합성되어 졌다. 패나퀼린은 9월에 채집한 식물에서 보다 7월에 채집한 식물에서 보다 활발하게 생합성되는 것처럼 보였다(예외 패나퀼린 G-1). 패나퀼린 B, C, G-1은 4년생 식물에서 활발하게 생합성되고 패나퀼린 (d)와 E는 2년생 식물에서 활발하게 생합성된다고 사료된다. 캇팅에서 기대된 결과들은 패나퀼린들이 인삼 식물의 지상부위에서 새로히 합성되고 괘나퀼린 G-1은 잎에서 새로히 합성된다고 하는 것 들이다. 인삼 조직 배양 연구에서 알려진 바와 같이 패나퀼린들은 미국인삼과 한국인삼의 잎, 줄기, 뿌리 캘러스 조직에 의하여서도 합성될 뿐만 아니라 또한 그들의 캘러스 뿌리에서도 패나퀼린들이 항성된다. 따라서 인삼 사포닌인 패나퀼린은 인삼 식물의 세포나 기관등 모든곳에서 새로히 합성된다고 사료할 수 있다. $C^{14}$아세테이트가 패나퀼린의 비당체 부분에도 인코포레이트되는 것을 입증하였는데, 2년생 식물에서 패낙사다이올은 $(0.56\;m{\mu}Ci/mg)$, 4년생 식물에서 패낙사다이올은 $(0.54\;m{\mu}Ci/mg)$스페시획 액티비티를 갖었다.