• 제목/요약/키워드: inclined channel

검색결과 84건 처리시간 0.029초

Experimental Study on Two-Phase Flow Parameters of Subcoolet Boiling in Inclined Annulus

  • Lee, Tae-Ho;Kim, Moon-Oh;Park, Goon-Cherl
    • Nuclear Engineering and Technology
    • /
    • 제31권1호
    • /
    • pp.29-48
    • /
    • 1999
  • Local two-phase flow parameters of subcooled flow boiling in inclined annulus were measured to investigate the effect of inclination on the internal flow structure. Two-conductivity probe technique was applied to measure local gas phasic parameters, including void fraction, vapor bubble frequency, chord length, vapor bubble velocity and interfacial area concentration. Local liquid velocity was measured by Pilot tube. Experiments were conducted for three angles of inclination; 0$^{\circ}$(vertical), 30$^{\circ}$, 60$^{\circ}$. The system pressure was maintained at atmospheric pressure. The range of average void fraction was up to 10% and the average liquid superficial velocities were less than 1.3 m/sec. The results of experiments showed that the distributions of two-phase How parameters were influenced by the angle of channel inclination. Especially, the void fraction and chord length distributions were strongly affected by the increase of inclination angle, and flow pattern transition to slug flow was observed depending on the How conditions. The profiles of vapor velocity, liquid velocity and interfacial area concentration were found to be affected by the non-symmetric bubble size distribution in inclined channel. Using the measured distributions of local phasic parameters, an analysis for predicting average void fraction was performed based on the drift flux model and flowing volumetric concentration. And it was demonstrated that the average void fraction can be more appropriately presented in terms of flowing volumetric concentration.

  • PDF

마젤란 분지의 백악기 심해저 하도 퇴적계의 퇴적상 및 진화 (Sedimentary Facies and Evolution of the Cretaceous Deep-Sea Channel System in Magallanes Basin, Southern Chile)

  • 최문영;손영관;조형래;김예동
    • Ocean and Polar Research
    • /
    • 제26권3호
    • /
    • pp.385-400
    • /
    • 2004
  • The Lago Sofia Conglomerate encased in the 2km thick hemipelagic mudstones and thinbedded turbidites of the Cretaceous Cerro Toro Formation, southern Chile, is a deposit of a gigantic submarine channel developed along a foredeep trough. It is hundreds of meters thick kilometers wide, and extends for more than 120km from north to south, representing one of the largest ancient submarine channels in the world. The channel deposits consist of four major facies, including stratified conglomerates (Facies A), massive or graded conglomerates (Facies B), normally graded conglomerates with intraformational megaclasts (Facies C), and thick-bedded massive sandstones (Facies D). Conglomerates of Facies A and B show laterally inclined stratification, foreset stratification, and hollow-fill structures, reminiscent of terrestrial fluvial deposits and are suggestive of highly competent gravelly turbidity currents. Facies C conglomerates are interpreted as deposits of composite or multiphase debris flows associated with preceding hyperconcentrated flows. Facies D sandstones indicate rapidly dissipating, sand-rich turbidity currents. The Lago Sofia Conglomerate occurs as isolated channel-fill bodies in the northern part of the study area, generally less than 100m thick, composed mainly of Facies C conglomerates and intercalated between much thicker fine-grained deposits. Paleocurrent data indicate sediment transport to the east and southeast. They are interpreted to represent tributaries of a larger submarine channel system, which joined to form a trunk channel to the south. The conglomerate in the southern part is more than 300 m thick, composed of subequal proportions of Facies A, B, and C conglomerates, and overlain by hundreds of m-thick turbidite sandstones (Facies D) with scarce intervening fine-grained deposits. It is interpreted as vertically stacked and interconnected channel bodies formed by a trunk channel confined along the axis of the foredeep trough. The channel bodies in the southern part are classified into 5 architectural elements on the basis of large-scale bed geometry and sedimentary facies: (1) stacked sheets, indicative of bedload deposition by turbidity currents and typical of broad gravel bars in terrestrial gravelly braided rivers, (2) laterally-inclined strata, suggestive of lateral accretion with respect to paleocurrent direction and related to spiral flows in curved channel segments around bars, (3) foreset strata, interpreted as the deposits of targe gravel dunes that have migrated downstream under quasi-steady turbidity currents, (4) hollow fills, which are filling thalwegs, minor channels, and local scours, and (5) mass-flow deposits of Facies C. The stacked sheets, laterally inclined strata, and hollow fills are laterally transitional to one another, reflecting juxtaposed geomorphic units of deep-sea channel systems. It is noticeable that the channel bodies in the southern part are of feet stacked toward the east, indicating eastward migration of the channel thalwegs. The laterally inclined strata also dip dominantly to the east. These features suggest that the trunk channel of the Lago Sofia submarine channel system gradually migrated eastward. The eastward channel migration is Interpreted to be due to tectonic forcing imposed by the subduction of an oceanic plate beneath the Andean Cordillera just to the west of the Lago Sofia submarine channel.

구멍이 있는 2개의 경사진 배플이 있는 채널에서의 열전달에 대한 실험적 연구 (Experimental Investigation of Heat Transfer in the Channel with Two Inclined Perforated Baffles)

  • 아리바시아 크리시나 부트라;안수환;강호근
    • 동력기계공학회지
    • /
    • 제12권4호
    • /
    • pp.39-45
    • /
    • 2008
  • 본 연구는 두 개의 경사진 다공 배플이 설치된 사각채널에서 국부 열전달향상 특성을 조사하였다. 채널은 19.8cm(W)$\times$4cm(H)의 단면적을 가지며 형상계수는 4.95이며 수력직경은 6.66cm이다. 4종류의 배플을 취급하였다. 가열 시험부에 동일한 크기, 경사각, 구멍형태의 경사 배플을 설치하였다. 경사 배플은 모두 19.8 cm의 폭, $2.55cm\times2.55cm$의 정 다이아몬드 형 구멍, 그리고 So의 경사각을 갖는다. 레이놀즈 수 범위는 23,000에서 57,000까지이다. 배플의 구멍의 수가 열전달 향상에 중요한 역할을 하였으며 구멍이 3개 인(baffle type II)가 가장 우수한 열전달 향상을 보였다.

  • PDF

경기만 석모수도 수로제방 조간대층에 발달하는 경사이질암상층리의 퇴적학적 연구 - 오일샌드 탐사 적용가능성 (Sedimentology of Inclined Heterolithic Stratification in Sukmo Channel, Kyonggi Bay, Korea - Application to Oil Sand Exploration)

  • 최경식;;전승수;김성필;박세진
    • 한국석유지질학회지
    • /
    • 제11권1호
    • /
    • pp.18-26
    • /
    • 2005
  • 경기만 북부 석모수도 수로제방에 40 m 두께의 조수로 포인트바(tidal point bar) 퇴적층이 발달하고 있다. 수로 제방은 위로 볼록한 형태를 가지고 있으며 간헐적으로 간조선 근방에서 파랑기원의 침식면이 나타난다. 경사이질암상층리는 최대 25 m 두께로 발달하며 수로 방향으로 경사도는 14도에 달한다. 경사이질암상층리의 하부에는 밀물방향성을 갖는 사층리층이 발달한다. 석모수도는 썰물우세 수로이지만 밀물 방향성의 사층리가 우세하게 발달하는데 이것은 조수로의 전형적인 특성인 창조류와 낙조류리 상호 회피성에 기인한다. 경사이질암상층리는 세립사와 점토의 교호층리로 구성되며 상향 세립화의 경향성을 보인다. 석모수도의 거대한 크기와 한강으로부터의 멀리 떨어진 위치, 강한 조류의 영향으로 인해 퇴적층 내에는 한강의 계절적인 유량변동이 기록되지 않는다.

  • PDF

경사수제 주변 흐름특성 분석에 관한 실험연구 (An Experimental Study on Flow Characteristic Around Inclined Crest Groyne)

  • 강준구;김성중;여홍구
    • 한국수자원학회논문집
    • /
    • 제42권9호
    • /
    • pp.715-724
    • /
    • 2009
  • 경사수제는 수위에 따라 흐름축소의 정도가 달라지기 때문에 폭이 좁은 수로나 수제설치로 인해 발생하는 수위상승으로 월류의 위험성이 있는 지점에 적용하기에 적합하다. 본 연구는 수제 선단부가 경사를 이루는 경사수제에 대한 수리실험을 수행하였다. 경사수제 실험의 주요 인자는 수제의 선단부 각도와 수심변화이며 이들 주요인자에 의한 수제주변의 유속을 LSPIV (Large Scale Particle Image Velocimetry)기법을 이용하여 측정하였다. 수제주변 흐름영역은 주흐름영역과 재순환영역으로 구분하여 분석하였다. 실험결과, 흐름중심선 변화는 환산길이에 영향이 크지 않았으나 재순환영역 폭은 환산길이가 클수록 증가하였다. 재순환영역의 길이는 환산수제길이의 약 12 $\sim$ 16배 정도 발생하였다. 주흐름영역에서의 최대유속은 상류접근유속에 1.45 $\sim$ 2.1배 내외로 수제경사에 의한 영향은 크지 않았다. 재순환영역의 역류속은 확연히 감소하는 것으로 나타나 제방부 호안에 안정된 흐름이 형성되는 것으로 나타났다.

An Experimental Studies on Heat Transfer and Friction Factor in a Square Channel with Varying Number of Ribbed Walls

  • Oh Se-Kyung;Kim Won-Cheol;Ahn Soo-Whan;Kang Ho-Keun;Kim Myoung-Ho
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권3호
    • /
    • pp.281-289
    • /
    • 2005
  • An experimental study on the heat transfer and friction characteristics of a fully developed turbulent air flow in a square channel with $45^{\circ}$ inclined ribs on one, two, and four walls is reported. Tests were performed for Reynolds number ranging from 7,600 to 24,900. The pitch-to-rib height ratio, p/e, was kept at 8 and rib height-to-channel hydraulic diameter ratio, $e/D_h$, was kept at 0.0667. The heat transfer coefficient and friction factor values were enhanced with the increase in the number of ribbed walls. Results of this investigation could be used in various applications of internal channel turbulent flows involving different number of roughened walls.

거친 사각채널에서 열전달과 유체유동 특성에 관한 실험 및 수치해석 (Experimental and Numerical Investigation on Heat Transfer and Fluid Flow Characteristics in the Ribbed Square Channel)

  • 강호근;배성택;이대희;안수환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권2호
    • /
    • pp.275-283
    • /
    • 2006
  • Experiment and three dimensional numerical investigations of incompressible turbulent flow through square channels with one- and two-sided ribbed walls are performed to determine pressure drop and heat transfer. The CFX(version 5.7) software package is used for the computation. The ribbed walls have a $45^{\circ}$ inclined square rib. Uniform heat flux is maintained on whole inner heat transfer channel area. The numerical results coincide with experimental data that obtained for $7,600{\le}Re{\le}24.900$, the pitch-to-rib height ratio (p/e) of 8.0. and the rib height-to-channel hydraulic diameter ratio ($e/D_h$) of 0.0667. The results show that values of local heat transfer coefficient and friction factor in the channel with two-sided ribbed wall are higher than those in the channel with one-sided ribbed walls.

Sensitivity of resistance forces to localized geometrical imperfections in movement of drill strings in inclined bore-holes

  • Gulyayev, V.I.;Khudoliy, S.N.;Andrusenko, E.N.
    • Interaction and multiscale mechanics
    • /
    • 제4권1호
    • /
    • pp.1-16
    • /
    • 2011
  • The inverse problem about the theoretical analysis of a drill string bending in a channel of an inclined bore-hole with localized geometrical imperfections is studied. The system of ordinary differential equations is first derived based on the theory of curvilinear flexible elastic rods. One can then use these equations to investigate the quasi-static effects of the drill string bending that may occur in the process of raising, lowering and rotation of the string inside the bore-hole. The method for numerical solution of the constructed equations is described. With the proposed method, the phenomenon of the drill column movement, its contact interaction with the bore-hole surface, and the frictional seizure can be simulated for different combinations of velocities, directions of rotation and axial motion of the string. Geometrical imperfections in the shape of localized smoothed breaks of the bore-hole axis line are considered. Some numerical examples are presented to illustrate the applicability of the method proposed.

온라인 마케팅 태도분석 (Online Marketing Attitude Analysis.)

  • 김세환
    • 산업융합연구
    • /
    • 제9권1호
    • /
    • pp.33-66
    • /
    • 2011
  • As an information-oriented society is arrived. an internet market has been developed steadily. This advance of internet market made the augmentation of purchasing clothes, and thus the fashion trade has tried to use effectively the internet marketing as a new channel of profit increasement. However, the fashion trade did not utilize efficiently an internet as a marketing mediation so far. This results from the want of coping with consumer behavior on the internet community. To answer the necessity of analysis of consumer behavior, this thesis inquires the difference of buying clothes on the internet shopping mall according to the lifestyle of consumer. Then this thesis provides the strategy of internet marketing fitted to each lifestyle for making a good profit. The inquiry was conducted to university located on Seoul, and the lifestyle of undergraduate was categorized to five groups, that is, trendy, information-inclined, economical purchase, brand-inclined, and spirit-pursuit types. This thesis analyzed the difference of consumer behavior of each type according to various factor, and presented a marketing strategy fitted to each type from these analysis results.

  • PDF

와이어 스크린 배플이 설치된 채널에서의 유체유동 저항 (Fluid Flow Resistance in a Channel with Wire-screen Baffles)

  • 오세경;아리바시아크리시나부트라;안수환
    • 동력기계공학회지
    • /
    • 제13권2호
    • /
    • pp.36-41
    • /
    • 2009
  • An experimental investigation was conducted to examine the fluid flow resistance in the rectangular channel with two inclined wire screen baffles. Two different types of wire screens; dutch weave and plain weave, were used as baffle devices in this experiment. Three kinds of baffles with different mesh specifications were made up of dutch type and four different kinds of baffles were made up of plain weave type. The stainless steel wire screen baffles were mounted on the bottom wall with varied angle inclination. Reynolds numbers were varied from 23,000 to 57,000. Results show that the mesh number of baffles plays an important role on friction factor behaviour. It is found that the baffle with the most number of meshes (type SA) has the highest fluid flow resistance.

  • PDF