• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.407-412
• /
• 2002

The primary cause of missing teeth vary depending on the region. The loss of posterior teeth is mainly due to dental caries, whereas that of the anterior teeth occur primarily due to trauma at the age of standing and walking and secondarily from the rampant dental caries. Particularly, reduction of the arch length in the cases of premature loss of primary teeth may compromise the eruption of succedaneous permanent teeth. This may result in crowding and impaction of the permanent teeth, and asymmetry of arch, thus a careful consideration for space maintenance should be made in such cases. Space maintainer is required in the case of premature loss of primary posterior teeth, because space loss result from the approximate and centrifugal movement of the neighboring teeth. Generally, in the case of primary incisor, space loss occurs when 1) tooth contact is relevant, 2) crowding in primary dentition is present, and 3) a primary incisor is lost before the eruption of primary canine. Contrarily, in the case of primary dentition with interdental space, space loss will not be observed, mostly when a primary incisor is lost after the eruption of primary canine. Thus, using a space maintainer in cases of premature loss of primary incisor has been introduced primarily not for the purpose of space maintaining but for an aesthetic purpose, prevention of parafunctional oral habits such as tongue thrust, and of pronunciation. Additionally, few case studies have been reported of space loss in cases of premature loss of primary incisor. This study is to report cases of the space loss following the premature loss of primary incisors observed in children.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.325-333
• /
• 1997

In addition to their function, there is growing interest in esthetics of restorations for teeth from fracture and loss. Because the perception of color depends on a lot of factors such as light source, object, observer and so on. It is difficult to make an objective expression. Therefore the using of mechanical equipment is recommended to exclude these variables and observer's vias. This study was carried out to evaluate the teeth color with a newly developed digital camera and to suggest a way to solve its flaws. After photo-taking and storaging the images of normal teeth into a computer, color spaces were examined with an image analysis system, Adobe Photoshop 3.04 and a statistical significance was determined between groups in term of teeth positions and ages. Results were as follow ; 1. Central incisor looked darker than lateral incisor(p<0.05), but lateral incisor and canine showed a similar lightness. 2. Central incisor showed more greenish color than lateral incisor and canine(p<0.05). 3. Canine showed higher yellowish value than central and lateral incisors(p<0.05). 4. Central incisor and canine showed no difference with aging. But in lateral incisor, teeth in fifth decade were lighter than those of third(p<0.05) and teeth in third decade were more reddish and yellowish than those of fourth decade(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.781-787
• /
• 1997

In spite of the improvements of the techniques in the field of preventive dentistry, many children still present with extensive destruction of primary anterior teeth. Not only the practioner must consider the pulp state of the primary incisor, but also restore the form, function and esthetics of the tooth. Restorative treatment of primary incisor tooth requires durability, retention and esthetics. Stainless steel crowns used in restoring primary anterior teeth is retentive and durable in comparison with the composite resin, celluloid crown. But they are not esthetic. To enhance the esthetics of the anterior stainless steel crown without reducing its superior retention, an open-face stainless steel crown has been suggested. Several authors have suggested cutting away the labial portion of the stainless steel crown and placing the composite resin in that area. By following this technique, the practioner can prepare a retentive, durable, and esthetic restoration for primary teeth which have suffered from extensive loss of teeth structure. In addition, the single missing primary anterior teeth can be successfully restored by soldering the stainless steel crown together. Open-face stainless steel crown is indicated in the areas of large interproximal lesions involving incisal edge, crown fracture with pulp exposure and congenital malformation of the teeth. By this technique, the practioner can restore primary anterior teeth successfully regardless of the amount of remaining tooth structure, bruxism habit and presence of attrition. In this case, rampant caries with extensive loss of tooth structure and single missing of primary anterior tooth hart been successfully treated with open-face stainless steel crown.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.51-57
• /
• 2012

The anterior maxillary incisor is the most traumatized region in the mouth and trauma is frequent between the ages of 8-10. Traumatic loss of teeth, can lead to many complications in children. Thus, as possible to keep traumatic teeth, but if you need extractions There may be. Complications occur and early tooth loss is frequent. Complications of early loss of central incisors are esthetic compromise, loss of vertical and horizontal width, height, contour of alveolar bone, tilting of adjacent teeth, arch length loss. Alveolar bone loss may affect normal function and stability, and results in esthetic problem for future prosthesis restoration. The 9-year-old girl and 6-year-old boy got early loss of upper central incisor. The amount of alveolar bone resorption was measured using cone beam computed tomograph and cast analysis.

• Journal of Korean Dental Science
• /
• v.3 no.1
• /
• pp.5-10
• /
• 2010

This study sought to compare the amounts of posterior anchorage loss during the en masse retraction of the upper anterior teeth between orthodontic mini-implant (OMI) and conventional anchorage reinforcement (CAR) such as headgear and/or transpalatal arch. The subjects were 52 adult female patients treated with sliding mechanics (MBT brackets, .022" slot, .019X.025" stainless steel wire, 3M-Unitek, Monrovia, CA, USA). They were allocated into Group 1 (N=24, Class I malocclusion (CI), upper and lower first premolar (UP1LP1) extraction, and CAR), Group 2 (N=15, Cl, UP1LP1 extraction and OMI), and Group 3 (N=13, Class II division 1 malocclusion, upper first and lower second premolar extraction, and OMI). Lateral cephalograms were taken before (T0) and after treatment (T1). A total of 11 anchorage variables were measured. Analysis of variance was used for statistical analysis. There was no significant difference in treatment duration and anchorage variables at T0 among the three groups. Groups 2 and 3 showed significantly larger retraction of the upper incisor edge (U1E-sag, 9.3mm:7.3mm, P<.05) and less posterior anchorage loss (U6M-sag, 0.7~0.9mm:2mm, P<.05; U6A-sag, 0.5mm:2mm, P<.01) than Group 1. The ratio of retraction amount of the upper incisor edge per 1 of anchorage loss in the upper molar made for the significant difference between Groups 1 and 2 (4.6mm:7.0mm, P<.05). Group 3 showed a relatively distal inclination of the upper molar (P<.05) and the intrusion of the upper incisor and first molar (U1E-ver, P<.05; U6F-ver, P<.05) compared to Groups 1 and 2. Although OMI could not shorten the treatment duration, it could provide better maximum posterior anchorage than CAR.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.441-447
• /
• 1996

This study was carried out in order to find out the pattern of the root resorption following maxillary incisor retraction after maxillary 1st bicuspid extration in maxillary protrusion patients. For this study, thirty two patient who received orthodontic treatment were chosen. The results were as follows; 1. Of the total 192 teeth, 61 teeth(31.77%) showed no apical root loss, 64 teeth(33.33%) fell into the class "slight", 46 teeth(23.96%) fell into the class "moderate". Only 21 teeth(10.94%) were classified as "excessive". 2. No correlation was noted between the amount of apical root loss and the types of tooth movement of the maxillary central incisors. 3. The patients who were treated with standard brackets had more changes in tooth axis and less movement of root apexes, but the patients with straight brackets had less changes in tooth axis and more movement of root apexes. 4. Comparing the degree of root resorption between bracket types, patients who had used standard brackets showed more apical root loss than patients who had used straight brackets. 5. The most frequent degree of root resorption observed in standard bracket patients was second degree, followed by first degree and third degree. The most frequent degree of root resorption observed in straight bracket patients was zero degree, followed by first, second degree and third degree.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.259-272
• /
• 1997

This study was performed to locate the anteroposterior position of the center of resistance of upper anterior teeth when intrusive forces are acted on them by applying segmented arch mechanics. Three-dimensional finite element model of upper six anterior teeth, periodontal ligament and alveolar bone was constructed The locations of the center of resistance were compared according to the three variables, which are number of teeth contained in anterior segment, axial inclination of anterior teeth, and degree of alveolar bone loss. The following conclusions were drawn from this study; 1. When the axial inclination and alveolar bone height were normal, the locations of center of resistance of anterior segment according to the number of teeth contained were as follows; 1). In 2 teeth segment, the center of resistance was located in the distal area of lateral incisor bracket 2) In 4 teeth segment, the center of resistance was located in the distal 2/3 of the distance between the brackets of lateral incisor and canine. 3) In 6 teeth segment, the center of resistance was located in 3mm distal of canine bracket, which is interproxirnal area. between canine and 1st premolar. 4) As the number of teeth contained in anterior segment increased, the center of resistance shifted to the distal side. 2. As the labial inclination of incisors increased, the center of resistance shifted to the distal side. 3. As the alveolar bone loss increased, the center of resistance shifted to the distal side.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.209-223
• /
• 2001

At intrusion of upper anterior teeth in patient with periodontal defect, the use of three-piece base arch appliance for pure intrusion is required. To investigate the change of the center of resistance and of the distal traction force according to alveolar bone height at intrusion of upper anterior teeth using this appliance, three-dimensional finite element models of upper six anterior teeth, periodontal ligament and alveolar bone were constructed. At intrusion of upper anterior teeth by three-piece base arch appliance, the following conclusions were drawn to the locations of the center of resistance according to the number of teeth, the change of distal traction force for pure intrusion and the correlation to the change of vertical, horizontal location of the center of resistance according to alveolar bone loss. 1. When the axial inclination and alveolar bone height were normal, the anteroposterior locations of center of resistance of upper anterior teeth according to the number of teeth contained were as follows : 1) In 2 anterior teeth group, the center of located in the mesial 1/3 area of lateral incisor bracket. 2) In 4 anterior teeth group. the center of resistance was located in the distal 2/3 of the distance between the bracket of lateral incisor and canine. 3) In 6 anterior teeth group, the center of resistance was located in the central area of first premolar bracket .4) As the number of teeth contained in anterior teeth group increased, the center of resistance shifted to the distal side. 2. When the alveolar bone height was normal, the anteroposterior position of the point of application of the intrusive force was the same position or a bit forward position of the center of resistance at application of distal traction force for pure intrusion. 3. When intrusion force and the point of application of the intrusive force were fixed, the changes of distal traction force for pure intrusion according to alveolar bon loss were as follows :1) Regardless of the alveolar bone loss, the distal traction force of 2, 4 anterior teeth groups were lower than that of 6 anterior teeth group. 2) As the alveolar bone loss increased, the distal traction forces of each teeth group were increased. 4. The correlations of the vertical, horizontal locations of the center of resistance according to maxillary anterior teeth groups and the alveolar bone height were as follows : 1) In 2 anterior teeth group, the horizontal position displacement to the vortical position displacement of the center of resistance according to the alveolar bone loss was the largest. As the number of teeth increased, the horizontal position displacement to the vertical position displacement of the center of resistance according to the alveolar bone loss showed a tendency to decrease. 2) As the alveolar bone loss increased, the horizontal position displacement to the vertical position displacement of the center of resistance regardless of the number of teeth was increased.

• The korean journal of orthodontics
• /
• v.44 no.4
• /
• pp.217-225
• /
• 2014

Single-tooth implantation has become a common treatment solution for replacement of a root-fractured maxillary incisor in adults, but the long-term esthetic results can be unfavorable due to progressive marginal bone loss, resulting in gingival recession. In this case report, a maxillary central incisor with a root fracture in its apical one-third was orthodontically extruded and extracted in a 21-year-old female. Implant surgery was performed after a 3-month healing period, and the final crown was placed about 12 months after extraction. After 12 years, favorable osseous and gingival architectures were visible with adequate bone height and thickness at the buccal cortical plate, and no gingival recession was seen around the implant-supported crown. Although modern dentistry has been shifting toward simplified, clinical procedures and shorter treatment times, both general dentists and orthodontists should be aware of the possible long-term esthetic advantages of orthodontic extrusion of hopelessly fractured teeth for highly esthetically demanding areas and should educate and motivate patients regarding the choice of this treatment solution, if necessary.