• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.7-28
• /
• 1993

본 총설에서는 새로운 방부제와 방부처리 기술의 현재 발전 동향을 요약, 보고한다. 많은 새로운 방부제들이 약제의 독성 측면에서 환경적인 충격을 완화시킬 수 있는 잠재성을 가지고 있지만, 방부제로서 상업화되기 위해서는 이러한 약제들은 약제의 효능과 환경 안전성 간의 몇 가지 상호 조정 관계가 반드시 해결되어야 한다. Ammoniacal copper 계통의 방부제들이 지접부 사용에 적합한 새로운 수용성 방부제들의 주종을 이루고 있으며, 기존의 유용성 방부제들을 물에 용해한 emulsion 형태도 지접부 사용의 가능성을 보여 준다. 새로운 유용성 방부제 중에서 copper naphthenate, substituted isothiazolones, chlorothalonil, oxine copper가 지접부 사용을 위한 최상의 후보로 평가되고 있다. 유용성 방부제를 emulsion 형태로 사용하는 것은 유용성 방부제에 사용되는 석유 계통 용제의 소비를 감소시키기 때문에 중대한 의미를 가진다. 방부제들의 효능을 개선하고 강화시키기 위해 사용되는 첨가제들도 본 총설에서 거론된다. 재질개량을 위해 사용되는 비통상적인 방법(nonconventional system)들도 생물학적 열화 및 기상열화에 대한 저항성을 부여하여 목재의 사용수명을 증가시킨다. 전처리 공정에서 침상 자상처리(Needle incising)와 레이져 자상처리는 난주입 수종의 처리도를 개선시킬 수 있는 잠재성을 가지고 있다. 처리기술에 있어서 여러 가지 혁신적인 변화들은 기존의 처리 schedule을 조성함에 그 기본을 두고 있다. 난주입 수종의 처리도 개선은 pulsation법이나 고압 약제 분사법 (high energy liquid jets) 같은 고압을 적용하는 처리법에 의해서 달성된다. 미래의 처리공장들은 방부제를 기체상태로 또는 물질의 임계점 이상에서 방부제를 처리할 수도 있다. 이러한 새로운 접근은 외관이 깨끗하고, 처리도도 매우 양호한 처리재를 생산하는데 일조하리라 기대한다. 환경에 대한 대중적인 지대한 관심은 앞으로 목재 방부산업에 큰 영향을 미칠 것으로 보인다. 결과적으로 방부제의 처리목재내 가속 정착에 관한 연구에 상당한 노력이 투자될 것이다. 처리 후 가공에 관한 다른 주요한 연구는 방부제 처리 후 실시되는 재건조가 처리재의 역학적 성질에 미치는 영향에 대한 것이다.

• Journal of Oral Medicine and Pain
• /
• v.22 no.1
• /
• pp.125-135
• /
• 1997

The Author examined the clinical and histological changes on the dorsal tongue mucosa of the adult rats after lasing by pulsed Nd:YAG laser and incising with scalpel. The dorsal tongue was lased through 320$\mu\textrm{m}$optic fiber moving 2.5mm/second to make linear incision 5mm. The five conditions of lasing were three application with 1.0W, 1.75W, 3.0W and 3.0W under saline cooling, and single application with 3.0W at 20Hz. With scalpel, linear incisions through the surface epithelium were performed to 5mm in length. After observing the clinical changes of the incised wounds, the animals were sacrified and the tissues were excised to make the tissue specimens. The stained microscopic tissue slide were observed histologically under the microscope. The following results were obtained : 1. While incision with scalpel causes severe bleeding, lasing does not cause bleeding. 2. In three applications with 1.75W and 20Hz, tissue ablation was limited to areas contacted with optic fiber. 3. In three applications with 3.0W and 20Hz, deep incised wound, extensive destruction of the adjacent epithelium and charring were observed. 4. In three applications with 3.0W and 20Hz under saline cooling, tissue ablation was limite to the superficial mucosa and charring was not observed. 5. In single application with 3.0W and 20Hz, the shape of the incised wound was similar to that of the scalpel incision.

• Korean Journal of Cleft Lip And Palate
• /
• v.3 no.2
• /
• pp.41-50
• /
• 2000

The alar base on the cleft side in unilateral complete cleft lip, alveolus and palate is markedly displaced laterally, caudally and dorsally, By incising the pyriform margin from the cleft margin of the alveolar process, including mucosa of the anterior part of the inferior turbinate, to the upper end of the postnasal vestibular fold, the alar base is released from the maxilla, A physiological correction of nasal deformity can be accomplished by careful reconstruction of nasolabial muscle integrity, functional repair of the orbicular muscle, raising and rotating the displaced alar cartilage, and finally by lining the lateral nasal vestibule, The inferior maxillary head of the nasal muscle complex is identified as the deeper muscle just below the web of the nostril, The muscle is repositioned inframedially, so that it is sutured to the periosteum that overlies the facial aspect of the premaxilla in the region of the developing lateral incisor tooth, And then, the deep superior part of the orbicular muscle is sutured to the periosteum and the fibrous tissue at the base of the septum, just in front of the anterior nasal spine, The nasal floor is surgically created by insertions of the nasal muscle complex in deep plane and of the orbicular muscle in superficial one, The upper part of the lateral nasal vestibular defect is sutured by shifting the alar flap cephalically, The middle and lower parts of this defect are closed by use of cleft margin flaps of the philtral and lateral segments, respectively, Authors stress the importance of nasal floor reconstruction at primary surgery and report the technique and postoperative results.

• Journal of Gastric Cancer
• /
• v.19 no.3
• /
• pp.290-300
• /
• 2019

Purpose: The optimal method for intracorporeal esophagojejunostomy remains unclear because a purse-string suture for fixing the anvil into the esophagus is difficult to perform with a laparoscopic approach. Therefore, this study aimed to evaluate our novel technique to fix the anvil into the esophagus. Materials and Methods: This retrospective study included 202 patients who were treated at our institution with an intracorporeal circular esophagojejunostomy in a laparoscopy-assisted total gastrectomy with a Roux-en-Y reconstruction (166 cases) or a laparoscopy-assisted proximal gastrectomy with jejunal interposition (36 cases). After incising 3/4 of the esophageal wall, a hand-sewn purse-string suture was placed on the esophagus. Next, the anvil head of a circular stapler was introduced into the esophagus. Finally, the circular esophagojejunostomy was performed laparoscopically. The clinical characteristics and surgical outcomes were evaluated and compared with those of other methods. Results: The average operation time was 200.3 minutes. The average hand-sewn purse-string suturing time was 6.4 minutes. The overall incidence of postoperative complications (Clavien-Dindo classification grade ${\geq}II$) was 26%. The number of patients with an anastomotic leakage and stenosis at the esophagojejunostomy site were 4 (2.0%) and 12 (6.0%), respectively. All patients with stenosis were successfully treated by endoscopic balloon dilatation. There was no mortality. Regarding the materials and devices for anvil fixation, only 1 absorbable thread was needed. Conclusions: Our procedure for hand-sewn purse-string suturing with the double ligation method is simple and safe.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.50-57
• /
• 2004

This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fungi was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi (Tyromyces palustris) and brown rot fungi (Trametes versicolor) showed that the treated sample has a decay resistance to these two fungi.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.52-60
• /
• 2003

The physical properties of small hardwood and softwood specimens treated with liquid ammonia were investigated. The specimens treated for 4 or 18 hours were compared with the controls. The EMCs of the liquid ammonia treated specimens were higher than those of the controls when conditioned at the same humidities. However once oven-dried they didn't show any significant differences in EMCs. With the increase of liquid ammonia treatment time specimens shrank in radial and tangential directions, but not in longitudinal direction. As liquid ammonia treatment time increased the ultrasonic velocities of specimens decreased and their densities increased, thus their dynamic MOEs decreased. For chestnut specimens the presteamed were more plasticized than the liquid ammonia treated. Incising on the surfaces of specimens didn't improve liquid ammonia permeability in both hardwoods and softwoods. Liquid ammonia treatment was very effective for plasticizing 5 mm thick softwoods. Relative dielectric constants and thermal conductivities were measured with both liquid ammonia treated and control specimens.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.42-47
• /
• 2000

This study was designed to investigate the effect of treatment variables on CCA treatment of Japanese red pine (Pinus densiflora), Japanese larch (Larix leptolepis), and ezo spruce (Picea jezoensis) round posts. Variables included were duration of initial vacuum (30, 45, or 60 minutes) and maximum pressure applied (8.5, 10.5, or 14.0 kg/$cm^2$), and maximum pressure was maintained until refusal point was reached. Regardless of wood species, extending the duration of initial vacuum more than 30 minutes did not affect treatability. Increasing pressure did not affect preservative penetration; however, preservative retention was affected by pressure levels, particularly at higher level (14.0 kg/$cm^2$). Preservative penetration depth of Japanese red pine met a minimum requirement specified by Notification of Korean Forestry Administration (No. 1999-8) for hazard class H5 of CCA-treated wood. Penetration of preservative in both Japanese larch and ezo spruce was not deep because of shallow sapwood thickness of these species, so pretreatment such as incising should be considered if these species are treated with preservatives. Although retention in Japanese red pine was not significantly increased even with 14.0 kg/$cm^2$, that of refractory Japanese larch and ezo spruce was significantly increased with the application of 14.0 kg/$cm^2$. Effect of treatment variables on refusal time was unclear; however, it is cleared that the refusal time was shortened with the increase in sapwood thickness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)