• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.264-274
• /
• 1997

A numerical analysis on condensation and coagulation of the metallic species with fly ash particles pre-existing in an incinerator was performed. Waste was simplified as a mixture of methane, chlorine, and small amounts of Pb and Sn. Vapor-phase amounts of Pb- and Sn -compounds were first calculated assuming a thermodynamic equilibrium state. Then theories on vapor-to-particle conversion, vapor condensation onto the fly ash particles, and particle-particle interaction were examined and incorporated into equations of aerosol dynamics and vapor continuity. It was assumed that the particles followed a log-normal size distribution and thus a moment model was developed in order to predict the particle concentration and the particle size distribution simultaneously. Distributions of metallic vapor concentration (or vapor pressure) were also obtained. Temperature drop rate of combustion gas, fly ash concentration and its size were selected as parameters influencing the discharged amount of metallic species. In general, the coagulation between the newly formed metal particles and the fly ash particles was much greater than that between the metal particles themselves or between the fly ash particles themselves. It was also found that the amount of metallic species discharged into the atmosphere was increased due to coagulation. While most of PbO vapors produced from the combustion were eliminated due to combined effect of condensation and coagulation, the highly volatile species, PbCl$_{2}$ and SnCl$_{4}$ vapors tended to discharge into the atmosphere without experiencing either the condensation or the coagulation. For Sn vapors the tendency was between that of PbO vapors and that of PbCl$_{2}$ or SnCl$_{4}$. To restrain the discharged amount of hazardous metallic species, the coagulation should be restrained, the number concentration and the size of pre-existing fly ash particles should be increased, and the temperature drop rate of combustion gas should be kept low.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2008년도 춘계학술 발표회
• /
• pp.277-280
• /
• 2008

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2001년도 정기총회 특별강연 및 춘계학술연구발표회(2)
• /
• pp.45-48
• /
• 2001

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
• /
• pp.232-235
• /
• 2005

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.242-245
• /
• 2005

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.68-74
• /
• 2010

본 연구에서는 생활폐기물 소각 비산재를 활용하여 유리화 온도보다 낮은 소결 온도에서 calcium chloroaluminte($11CaO{\cdot}7Al_2O_3{\cdot}CaCl_2$, 본문에서는 CCA로 표기)의 시멘트 광물을 합성하였다. CCA를 합성 시 $Al_2O_3$ 성분 부족한 양은 정수 슬러지를 부 원료로 첨가하였다. 생활폐기물 소각 비산재의 CaO 성분과 정수 슬러지를 10:7로 혼합하여 $900^{\circ}C-1300^{\circ}C$ 소결 온도에 따른 CCA 합성 거동을 관찰하였다. 혼합 시료는 개방형(Opened System) 소결 조건 전기로와 밀폐형(Closed System) 소결 조건 전기로에서 온도에 따른 CCA 합성 거동을 관찰한 결과, CCA 합성은 개방형과 밀폐형 모두 $1,000^{\circ}C$에서 합성이 되었다. 그러나 소성 분위기로 볼 때 개방형보다는 밀폐형의 소성 조건에서 CCA의 합성율이 높았으며, 이는 소각재 소성 과정에서 Cl의 휘발 거동에 따라 CCA의 합성율 및 분해 온도가 결정되는 것으로 나타났다.

• 대한환경공학회지
• /
• 제31권2호
• /
• pp.114-118
• /
• 2009

본 연구에서는 소각재와 하수슬러지, 용융슬래그 등을 이용하여 기존의 벽돌을 대신 할 수 있는 건축외장재를 제조하고,사용 재료의 혼합비와 소성온도 등 적정 제작 조건을 도출하고자 한다. 외장재 제조는 재료를 각 비율별로 성형하여 상온과 $160^{\circ}C$에서 각각 24시간 동안 건조 후 1,080~$1,130^{\circ}C$에서 2시간 동안 소성하였다. 소성한 다음 제조한 외장재 시편의 압축강도를 측정해 본 결과 소성온도가 증가할수록 압축강도는 증가하였으며, 소각재의 함유량이 적을수록, 용융슬래그의 함량이 증가할수록 압축강도가 증가하였다. 본 연구에서 도출된 외장재 제조 적정조건은 소각재 : 용융슬래그 : 하수슬러지 : 점토의 비율이 10 : 20 : 5 : 65로 제조된 시편을 $1,115^{\circ}C$에서 소성한 시편의 압축강도가 41 MPa 이상으로 나타나 외장재로서의 사용이 가능한 것으로 나타났다. 또한 제조한 외장재의 중금속 용출실험결과 환경적으로 안전한 것으로 나타났다.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• 상하수도학회지
• /
• 제30권5호
• /
• pp.571-577
• /
• 2016

Phosphorus is an essential and irreplaceable element for all living organisms and its resource is limited. Significant amount of used phosphorus is collected in sewage treatment plant as sludge. Sludge ash after incineration contains about 10% of phosphorus in dry mass basis, which is comparable to phosphate rocks, and it is an important source of phosphorus recovery. Acid and alkali were used to leach phosphorus from sludge ash and compared for their leaching kinetics and performance. Phosphorus leaching by NaOH was fast and 0.2 N and 2 N NaOH leached 49% and 56% of the total phosphorus in the sludge ash at the L/S ratio of 100. Phosphorus leaching by sulphuric acid and hydrochloric were very fast and most of the phosphorus was leached in 5 minutes. In case of sulphuric acid 95% of the total phosphorus in the sludge ash was leached by 0.2 N at the L/S ratio of 100 and 93% was leached by 1 N at the L/S ratio of 10. 1 N hydrochloric acid leached 99% of the total phosphorus at the L/S ratio of 10. The results showed acids were more effective than alkali for phosphorus leaching from sludge ash and hydrochloric acid leached more phosphorus than sulphuric acid.

• 한국지반환경공학회 논문집
• /
• 제4권4호
• /
• pp.35-43
• /
• 2003

폐기물로 발생하는 제지슬러지 소각재와 하수슬러지 소각재의 재활용을 위하여 각 소각재의 물리 화학적인 특성을 조사하였으며 소각재가 가지는 포졸란 반응특성을 이용하여 시멘트 혼화재로서 활용가능성에 대하여 검토하였다. 제지 및 하수슬러지 소각재의 입도는 $10{\sim}100{\mu}$에 대부분 분포하고 있으며, 포졸란 반응물질인 $SiO_2$와 $Al_2O_3$의 함량이 45.8~51.0%이였다. 압축강도시험결과 소각재 함량이 10%일 때 비교적 높은 압축강도를 나타났으며 기공율 또한 하수슬러지 소각재를 제외하고 10%일 때 낮은 것으로 나타났다. 이 결과 제지슬러지 소각재의 경우 시멘트 혼화재로써의 재활용 가능성이 충분한 것으로 판단된다.