• 지능정보연구
• /
• 제11권1호
• /
• pp.95-105
• /
• 2005

얼굴인식을 이용해 출입을 통제하는 보안 시스템에 있어서 얼굴인식성능은 인증 대상의 변화 (표정, 헤어스타일, 나이, 화장)에 커다란 영향을 받는다. 이처럼 수시로 변화하는 환경 변화를 보완하기 위하여 일반적인 얼굴인식 시스템에서는 일정한 보안 임계치를 설정해두고 임계치 내에 포함되는 얼굴을 기존에 등록된 얼굴과 교체하거나 추가적으로 등록하는 업데이트 방식이 사용되고 있다. 그러나 이러한 방식은 부정확한 매칭 결과를 보이거나, 유사한 얼굴에 쉽게 반응할 수 있다. 따라서 우리는 각 얼굴간의 유사도나 인증 대상의 변화를 흡수하며, 잘못된 얼굴 등록을 방지하기 위한 방법으로 학습 성능이 우수한 유전자 알고리즘을 제안하고자 한다. 변화가 심하고 유사한 얼굴영상(한사람 당 10개씩의 변화된 300개의 얼굴 영상)에 대하여 실험을 수행하였고, 얼굴인식기법은 주성분 분석에 기초한 고유얼굴을 이용하였다. 제안된 방식은 기존 얼굴인식 출입통제 시스템에 비해 우성인자의 인식률을 향상뿐만 아니라 유사 얼굴(열성인자)에 반응하는 비율을 감소시키는 효과를 보였다.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.405-419
• /
• 2007

A series of tracer experiments for the evaluation of atmospheric dispersion was performed over the urban area of Seoul using two inert, non-deposition perfluorocarbon (PMCH and m-PDCH) gases during three years campaign on 2002, 2003 and 2005. 30 sampling sites for collecting these tracers were located along two arcs of 2.5 and 5 kilometers downwind from the release point. About ten measurements which each lasted for 2 hours or 4 hours were made over the two consecutive days during each campaign. CALPUFF and MM5 meteorological model were applied to evaluate the urban dispersion in detail. Size of Modeling domain was $27\;km{\times}23\;km$ and the fine nest in the modeling domain had a grid size of 0.5 km. The results showed that CALPUFF dispersion model had a tendency to estimate tracer concentrations about $2{\sim}5$ times less than those of ambient samples under many conditions. These consistent inaccuracy in urban dispersion was attributed to inherent inaccuracy and lack of details in terrain data at urban area.

• 대한치과보철학회지
• /
• 제40권1호
• /
• pp.18-29
• /
• 2002

As the inaccuracy which was made in implant impression prevented passive fit, it needed to solder the sectioned framework at several locations to correct the inaccuracy. Many clinicians have suggested impression techniques which could make passive fit between implant and superstructure. The purpose of this research was to measure and compare the accuracy of three methods of taking impression with the strain amplifier. The experimental groups were classified as follows : Group I : splinted the two parts with $Futar^{(R)}D$ Occlusion. Group II : splinted the two parts with $DuraLay^{(R)}$. Group III ; didn't splint the two parts. The results were as follows ; 1. The values of strain in the vertical and horizontal surfaces were increased in the order of group I, group II and group III. 2. Group 1 showed higher accuracy of the duplicated casts in the vortical and horizontal sur faces than group II and group III (p<0.05). 3. There were no significant differences in the accuracy of the duplicated casts between group II and group III. From the above results, it is considered that the splinting method of impression copings could make an influence on the accuracy of the master casts. To improve the accuracy of the master casts, splinting the squared impression copings with the additional silicone occlusion materials is recommendable.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.129-131
• /
• 2000

We must precisely understand the current state of system for efficiently and safely operating the power system of subway and it is the important problem to secure the high-quality data for state estimation. The current state of subway system is calculated by data to be transmitted to central control office from every place to install the measuring instruments so the high accuracy and trust can be maintained if the measured data have a high quality. But it is difficult to estimate the accurate state of system because of the noises in transit data and the inaccuracy due to errors of measuring instruments. So the object is to reduce the difference from the real value in terms of improving considerably the inaccuracy due to instrumental errors and noises using the state estimation method. In this paper we estimate the accurate state of the subway power system in the arbitrary measured values of a Sangin station in Deagu subway, and consider the possibility to apply to the real subway power system on the basis of that. This test shows to make sure of the possibility to apply to the real system usefully.

• 대한교통학회지
• /
• 제27권6호
• /
• pp.55-67
• /
• 2009

우리나라의 경우 기존에 시행된 대부분의 도로건설사업이 교통수요의 과다 예측으로 인하여 재정의 낭비를 초래하였다. 이 같은 교통수요 예측 오류 발생의 원인은 여러 가지가 있을 수 있지만 사용된 교통기초자료의 낮은 신뢰성과 기관 간 정보연계 미흡을 주요한 원인으로 꼽을 수있다. 이에 본 연구는 대표적 교통기초자료인 국가교통DB와 수도권 가구통행실태는 향후 추진될 도로건설사업계획 수립에 크게 활용될 것이며 이 자료들도 현재 낮은 신뢰성과 기관 간 정보연계 미흡의 문제가 있으므로 개선이 필요하다는 인식하에서 시도되었으며 도로부문 교통기초자료 구축사업의 문제점을 교통수요 예측 관련 자료를 중심으로 살펴보고 개선방안을 제시하고자 하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제13권1호
• /
• pp.37-43
• /
• 1991

두부방사선사진을 이용한 안모의 측모예측은 악교정수술에 있어서 가장 중요한 수술전 치료계획의 한부분으로 술후 경조직과 연조직의 변화를 예상하며 술자와 환자간에 술후 결과를 의논하는 대화의 재료로서도 그 중요성이 크다. 그러나, 술후 환자의 최종적인 측모와 수술 직전에 수술 계획에 따라 시행한 술후 측모의 예측과는 차이가 있다. 이러한 수술 전 시행하는 측모 예측의 부정확성을 감소시키기 위하여 새로운 경조직 대 연조직 변화비율 등을 추정하는 많은 연구가 시행되어 왔으나 측모방사선 예측의 부정확도를 조사하고 이러한 부정확성에 영향을 미치는 변수를 확인함이 측모방사선예측의 부정확성을 이해하고 감소시키는 데에 있어서 그 중요성이 크다고 생각된다. 이에 저자들은, 이미 시행되어 수술에 사용된 술후 측모예측기록을 수술직후 두부방사선 사진 및 술후 최소 6개월 추적 방사선 사진에 중첩하여 측모 예측의 부정확도를 조사한 바 총 30명의 환자에서 20명(66.6%)이 부정확도를 보였고 악골 및 치열의 술후 위치 불안정성도 측모 예측 정확군과 부정확군에 모두 19명(63.3%)에서 발생하여 측모 예측의 부정확도 영향을 주는 중요한 요인으로 확인되었다.

• 대한지역사회영양학회지
• /
• 제13권2호
• /
• pp.237-243
• /
• 2008

It was examined whether altering vision would influence food intake through consumption monitoring and whether this would be reflected in consumption estimate and satiety. The experiment was designed in two visibility levels: 1) an accurate visual cue (bowl covered with wrap) vs 2) a biased visual cue (bowl covered with foil). Thirty three female college students participated in this study. The subjects ate Kimbab in the lab once a week for 2 weeks. They were served 24 pieces of Kimbab in a bowl covered either with wrap or foil. The results showed that the actual Kimbab intake from the bowl covered with foil was significantly lower than the test using wrap ($13.4{\pm}3.3$ pieces vs $15.0{\pm}3.8$ pieces, p < 0.05). And there were no significant differences from the cognitive Kimbab intake between the tests with foil and wrap. However, the satiety rate of Kimbab in a bowl covered with foil was significantly higher than that with wrap at 1 hour and 2 hour after the Kimbab eaten (p < 0.05). Less consumed cases were recognized by subjects due to the inaccuracy during the consumption monitoring process. This result revealed that vision influences not only eating behavior but also subjective feelings of satiety after meal. In conclusion, the consumption monitoring by visual cues can play an important role in food intake and satiety rate.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.55-64
• /
• 2019

PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

• 한국콘텐츠학회논문지
• /
• 제19권5호
• /
• pp.363-370
• /
• 2019

본 논문의 목적은 인터넷으로 연결된 시대에 청소년 소비자의 구매의사결정과정에서 무리행동에 따른 쏠림소비 현황을 파악하는 것이다. 이를 위하여 본 연구에서는 유행민감도, 상호작용, 부정확성이 어떻게 청소년의 쏠림소비에 영향을 미치는지와 더불어 쏠림소비와 소비행복 간의 관계를 조사할 수 있는 연구모형을 개발하였다. 본 연구를 위해 설문방법을 이용하였고, 분석을 위한 데이터는 142개의 데이터를 적용하였다. 그리고 자료의 분석은 구조방정식모형을 사용하였다. 실증분석결과는 첫째, 유행민감도와 상호작용이 쏠림소비에 직접적인 영향을 미치는 것으로 나타났다. 둘째, 쏠림소비는 소비행복에 직접적인 영향을 미치는 것으로 나타났다. 본 연구의 결과는 청소년들의 소비행동에서 합리적인 선택을 설계할 때 무리행동의 중요성을 제시하였다는데 의의가 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2008

This paper replaces an conventional 300-austenitic stainless steel sheet to a 400-ferritic stainless steel for the cost reduction of a pulsator cover of a washing machine. However, ferritic stainless steel has poor formability in comparison with austenitic one. The low formability of ferritic steel results in problems during stamping such as fracture, wrinkling, shape inaccuracy and so on. Design modification of the stamping tool is carried out with the aid of the finite element analysis for multi-stage stamping process. The simulation results show that fracture occurs on top of the product while wrinkles are generated by the excess metal near the wing part. Modification of the initial stamping die is performed to improve metal flow and to eliminate problems during the stamping process. Simulation with the modified design fully demonstrates that safe forming is possible without inferiorities.