• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.54-63
• /
• 2011

An educational network system based on CAN protocol internal to a passenger ground vehicle has been developed. The developed network system has been applied to a commercial plug-in electrical vehicle and verified the educational applicability. To apply this in-vehicle network technology based on CAN, a suitable electric vehicle has been chosen and a CAN network structure has been designed, developed and manufactured. Since the commercial electric vehicle chosen as a test bed has its own proprietary electric network, we explain how the original electric network has been utilized and how the new network system has been designed. The developed network system on a real vehicle has been tested to show the applicability and the performance. Finally, the system has been applied at few classrooms to demonstrate how the in-vehicle network system works and to teach how to analyse the CAN signals. The developed system proven to be effective for educational purpose.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.73-76
• /
• 2005

The advanced information and communication technology gives vehicles another role of the third digital space, merging a physical space with a virtual space in a ubiquitous society. In the ubiquitous environment, the vehicle becomes a sensor node, which has a computing and communication capability in the digital space of wired and wireless network. An intelligent vehicle information system with a remote control and diagnosis is one of the future vehicle systems that we can expect in the ubiquitous environment. However, for the intelligent vehicle system, many issues such as vehicle mobility, in-vehicle communication, service platform and network convergence should be resolved. In this paper, an in-vehicle gateway is presented for an intelligent vehicle information system to make an access to heterogeneous networks. It gives an access to the server systems on the internet via CDMA-based hierarchical module architecture. Some experiments was made to find out how long it takes to communicate between a vehicle's intelligent information system and an external server in the various environment. The results show that the average response time amounts to 776ms at fixec place, 707ms at rural area and 910ms at urban area.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.66-69
• /
• 2010

최근 차량에는 차량과 IT와 결합을 차량의 안전성, 편리성을 위해 많은 전자제어장치(ECU)가 장착되어 있고 있다. 이러한 전자제어장치는 각 전자제어장치에 대한 Data는 OBDII 네트워크에 전송을 하고 멀티미디어에 대한 Data 는 MOST 네트워크에 전송을 한다. 본 논문에서는 기존의 블랙박스의 문제점을 보완하기 위해 차량용 네트워크의 새로운 멀티미디어 네트워크인 MOST 차량용 네트워크와 현재 차량에서 표준적으로 쓰이는 OBDII 차량용 네트워크를 이용하여 전자제어장치의 데이터를 이용한 Data들을 취합하여 차량의 현재 상황을 판단하고 정보를 제공함으로써 차량의 안전성 및 블랙박스로써의 역할을 극대화 시킬 수 있는 차량용 블랙박스 시스템을 구현하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제16권10호
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.414-421
• /
• 2007

This paper presents a engine/brake integrated VDC(Vehicle Dynamic Control) system using neural network algorithm methods for wheel slip and yaw rate control. For stable performance of vehicle, not only is the lateral motion control(wheel slip control) important but the yaw motion control of the vehicle is crucial. The proposed NNPI(Neural Network Proportional-Integral) controller operates at throttle angle to improve the performance of wheel slip. Also, the suggested NNPID controller performs at brake system to improve steering performance. The proposed controller consists of multi-hidden layer neural network structure and PID control strategy for self-learning of gain scheduling. Computer Simulation have been performed to verify the proposed neural network based control scheme of 17 dof vehicle dynamic model which is implemented in MATLAB Simulink.

• 한국산업정보학회논문지
• /
• 제19권3호
• /
• pp.9-15
• /
• 2014

In the ubiquitous computing environment, a ubiquitous vehicle will be a communication node in the vehicular network as well as the means of ground transportation. It will make humans and vehicles seamlessly and remotely connected. Especially, one of the prominent services in the ubiquitous vehicle is the vehicle remote operation. However, mutual-collaboration with the in-vehicle communication network, the vehicle-to-vehicle communication network and the vehicle-to-roadside communication network is required to provide vehicle remote operation services. In this paper, an Internet-based human-vehicle interfaces and a network architecture is presented to provide remote vehicle control and diagnosis services. The performance of the proposed system is evaluated through a design and implementation in terms of the round trip time taken to get a vehicle remote operation service.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.7-14
• /
• 2006

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1023-1026
• /
• 2005

In the ubiquitous computing environment, an intelligent vehicle is defined as a sensor node with a capability of intelligence and communication in a wire and wireless network space. To make it real, a lot of problems should be addressed in the aspect of vehicle mobility, in-vehicle communication, common service platform and the connection of heterogeneous networks to provide a driver with several intelligent information services beyond the time and space. In this paper, we present an intelligent information system for managing in-vehicle sensor network and a vehicle gateway for connecting the external networks. The in-vehicle sensor network connected with several sensor nodes is used to collect sensor data and control the vehicle based on CAN protocol. Each sensor node is equipped with a reusable modular node architecture, which contains a common CAN stack, a message manager and an event handler. The vehicle gateway makes vehicle control and diagnosis from a remote host possible by connecting the in-vehicle sensor network with an external network. Specifically, it gives an access to the external mobile communication network such as CDMA. Some experiments was made to find out how long it takes to communicate between a vehicle's intelligent information system and an external server in the various environment. The results show that the average response time amounts to 776ms at fixed place, 707ms at rural area and 910ms at urban area.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2311-2316
• /
• 2009

최근 편의성, 안전성, 편리성 등의 키워드가 자동차 시장에서 새로운 화두로 등장하면서 자동차 시장에서 차량 내 전장부분의 중요성이 커지고 있다. 이에 따라 많은 전자기기의 사용이 필수적으로 요구되어지면서 전자기기들 간의 통신이 부각되어지고 있다. 차량 내부에서는 컨트롤러, 센서, 그리고 멀티미디어 기기인 오디오, 스피커, 비디오, 네비게이션 등 다양한 장치들이 CAN이나 MOST와 같은 차량 네트워크를 통해 연결되어 있다. 현재 차량 네트워크는 서로 각각의 목적에 따라 운용되고 관리되어 지고 있다. 본 논문에서는 MOST Network를 이용하여 최근의 키워드가 되고 있는 편의성, 안전성, 편리성 등을 고려한 지능형 자동차에 요구되는 Navigation을 구현하여 차량 내 CAN Network를 제어하는 시스템을 제시하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.82-85
• /
• 2009

최근 편의성, 안전성, 편리성 등의 키워드가 자동차 시장에서 새로운 화두로 등장하면서 자동차 시장에서 차량 내 전장부분의 중요성이 커지고 있다. 이에 따라 많은 전자 기기의 사용이 필수적으로 요구되어지면서 전자 기기들 간의 통신이 부각 되어지고 있다. 차량 내부에서는 컨트롤러, 센서, 그리고 멀티미디어 기기인 오디오, 스피커, 비디오, 내비게이션 등 다양한 장치들이 CAN 이나 MOST와 같은 차량 네트워크를 통해 연결 되어 있다. 현재 차량 네트워크는 서로 각각의 목적에 따라 운용 되고 관리 되어 지고 있다. 본 논문에서는 MOST Network를 이용하여 최근의 키워드가 되고 있는 편의성, 안전성, 편리성 등을 고려한 지능형 자동차에 요구되는 Navigation을 구현하여 차량 내 CAN Network를 제어하는 시스템을 제시하고자 한다.