• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.67-74
• /
• 2009

In this paper, we constructed Embedded web-server to be monitored and controlled for intelligent vehicle on the base of embedded system and Zigbee wireless communication. By interfacing main controller and embedded system with ECU including every information of vehicle, it is possible to monitor the cruising information of vehicle, and sensor signal added to inside and outside of vehicle is transferred to embedded system through Zigbee communication. Web-server is constructed using embedded system, that's why the access to vehicle is possible using PC or mobile instrument, and the real-time check and control of vehicle is possible as well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2D
• /
• pp.129-136
• /
• 2012

In the US, Japan and Germany the Aerial-Based Vehicle Detection System, which collects real-time traffic data using the Unmanned Aerial Vehicle (UAV), helicopters or fixed-wing aircraft has been developed for the last several years. Therefore, this study was done to find out whether the Aerial-Based Vehicle Detection System could be used for real-time traffic data collection. For this purpose the study was divided into two parts. In the first part the possibility of retrieving real-time traffic data such as travel speed from the aerial photographic image using the image processing technique was examined. In the second part the quality of the retrieved real-time traffic data was examined to find out whether the data are good enough to be used as traffic information source. Based on the results of examinations we could conclude that it would not be easy for the Aerial- Based Vehicle Detection System to replace the present Vehicle Detection System due to technological difficulties and high cost. However, the system could be effectively used to make the emergency traffic management plan in case of incidents such as abrupt heavy rain, heavy snow, multiple pile-up, etc.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.25-38
• /
• 2022

Recently, it is reported that the Korean Unmanned Aerial Vehicle (UAV) interface protocol (K-4586) based on STANAG-4586 is being developed to secure interoperability between UAVs. The core elements of the K-4586-based Unmanned Aircraft System (UAS) are the Core UAV Control System (CUCS), Vehicle Specific Module (VSM), Data Link Interface (DLI), and C4I systems. In UAS based on K-4586, the DLI function for transmitting and receiving messages to link UAVs is included in VSM and CUCS respectively. The Generator/Analyzer (G/A) tool is an apparatus that is developed for protocol conformance verification for VSM and CUCS, and G/A tools with DLI message transmitting and receiving should be developed separately. Core applications (VSM, CUCS, DLI) and G/A tools based on K-4586 may be developed independently depending on the developers. If the DLI message modules are different for each developer, the scope and results of protocol conformance verification will be dissimilar, and some problems may happen during system integration. In this study, common DLI message module based on the API was designed to provide the DLI message transmitting and receiving function necessary to the development of core applications and the protocol conformance verification tool of based on K-4586. When applying the proposed common DLI message module, it can be expected to shorten the UAS system development period and reduce costs, and ensure conformance of protocol. In this paper, the design and implementation method for the common DLI message module based on API was proposed and the results of functional test was described.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1239-1246
• /
• 2004

The integration and union of regional digital map and vehicle location data in e-Logistics which means virtual service architecture based on the Internet among the logistics companies is indispensable clause in order to satisfy the visibility characteristics. Most conventional vehicle monitoring and controlling systems were constructed with individual and mutual exclusive architecture so that there are required lots of cost for sharing and integrating the information among them. In this paper, we design and implement an component-based open system which represent moving object location information as well as digital map using the GML(Geography Markup Language - international standard encoding based on XML). We also test proposed system on the delivery vehicle scenario in e-Logistics environment, and validate its superior in terms of extensibility and interoperability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.208-214
• /
• 2014

Vehicle dynamic states used in various advanced driving safety systems are influenced by road geometry. Among the road geometry information, the vehicle pitch angle influenced by road slope and acceleration-deceleration is essential parameter used in pose estimation including the navigation system, advanced adaptive cruise control and others on sag road. Although the road slope data is essential parameter, the method measuring the parameter is not commercialized. The digital map including the road geometry data and high-precision DGPS system such as DGPS(Differential Global Positioning System) based RTK(Real-Time Kinematics) are used unusually. In this paper, low-cost cascade extended Kalman filter(CEKF) based road slope estimation method is proposed. It use cascade two EKFs. The EKFs use several measured vehicle states such as yaw rate, longitudinal acceleration, lateral acceleration and wheel speed of the rear tires and 3 D.O.F(Degree Of Freedom) vehicle dynamics model. The performance of proposed estimation algorithm is evaluated by simulation based on Carsim dynamics tool and T-car based experiment.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1099-1103
• /
• 2018

Platooning of vehicles is an efficient traffic management model that improves traffic flow and fuel consumption. Especially, it is necessary to reduce computational load and networking overhead in automated connected vehicle systems. Because it is important to maintain the size of the platoon group appropriately for efficient platoon operation, this study proposed a dynamic grouping scheme for platooning in an automated vehicle system. The proposed scheme is analyzed by a mathematical model based on Markov chain. From the performance evaluation, it was confirmed that the proposed scheme appropriately controls the size of the platoon group.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.430-435
• /
• 2011

In this paper, a navigation technology of an unmanned vehicle using relative localization and magnetic guidance is proposed. Magnetic guidance system had been developed as a robust autonomous driving technology as long as magnetic fields on the path are detected. Otherwise, if magnetic fields were not detected due to some reasons, the vehicle could not drive. Therefore, in order to overcome the drawback, we propose that relative localization would be combined to magnetic guidance system. To validate the usefulness of the proposed method, a robotic vehicle was set up with the magnetic guidance system and the relative localization. In addition, the unmanned driving test was realized on the road without the magnetic fields so that the proposed method is verified by the experiment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.39-48
• /
• 2022

In this paper, we propose an anomaly detection system (ADS) to detect anomalies of the in-vehicle network for unmanned aerial vehicle (UAV). The proposed ADS detects the anomalies by measuring the similarity of status messages sequences periodically sent by the UAV to the ground control system. We defined three types of malicious message injection attacks that can be performed on the in-vehicle network of UAV and simulated those attack techniques in the Pixhawk4 quadcopter. The proposed ADS can detect abnormal sequences with accuracy of higher than 96%.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.2
• /
• pp.91-101
• /
• 2006

Researches on services of vehicles have been mainly focused on how to provide useful information and entertainment for an in-vehicle driver. However, the needs are appreciably increased for more advanced services that help drivers to check and manage their vehicles conveniently, without requiring drivers to attach to their vehicles. It is a sort of ubiquitous computing, providing an intelligent interactive services for human at any time and any where. In this paper, we present an intelligent vehicle information system to enable a driver to remotely diagnose and control a vehicle via CDMA communication network connected to the Internet. The system improves mobility for diagnosis and control of vehicle by implementing a cut and call back mechanism, which allows the vehicle terminal to have access to the information server on the Internet via CDMA call. No matter where the driver is, he can obtain the remote diagnosis and control services on the web browser without any additional application installation. Design methodology is introduced and evaluation results are analyzed for the CDMA-based intelligent vehicle information system. The experimental results show that the response time of the vehicle terminal to a web client request is 10.302 seconds at the beginning and 646.44ms thereafter. The average response time of CAN sensor node to a vehicle terminal request is 6.669ms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2737-2746
• /
• 2010

Recently, Logistics industry has emerged a new u-logistics paradigm combines USN / RFID technology. In this paper offers a vehicle history Web-based logistics management system based on the u-logistics paradigm. The design of this system is considered all events processes as a form of recycling and entire system is to modeling based UML of object oriented. Also It was undergone some process to make sure by logistics vehicles identified that RFID based was identified vehicle logistics. To identify logistics vehicle based RFID, identified the logistics vehicles is a process that will determine. The implementation method designed the interface based web which uses in the manager to C/S methods, consideration of the mobility of the system user implements the user GUI based PDA. As well as, In this paper was separated customer, manufacturer, distributor, administrator, drivers, respectively and focuses to raise a system reusability which is implementation by separately for each feature.