• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.555-560
• /
• 2018

In this paper, we focus on the study of educational contents using real vehicle based electric vehicle diagnosis system. To understand the electric vehicle, we describe the driving modes and operating principles of the core components and electric vehicles that make up the electric vehicles. In addition, we implemented a diagnostic system for analyzing the characteristics of the electric vehicle test bed and analyzed the characteristics of the vehicle based on the driving mode.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.375-380
• /
• 2009

In this paper, a steering actuator is designed and developed for an unmanned vehicle based on magnetic marker. One of the most important component of an unmanned vehicle is a steering actuator to follow magnetic road. Thus, we develop a steering actuator using a stepping motor and adopt to a new frequency control method depended on speed of the vehicle. In order to verify the usability of the developed system, the setup of unmanned vehicle installed the designed steering actuator is tested on magnetic road.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.361-368
• /
• 2019

This paper is a study on integrated air-conditioning system for 1-ton class commercial vehicle based on electric vehicle. In the case of an electric commercial vehicle, since the opening and closing of the door is frequently performed in order to get in and out of the cargo, the heat loss largely occurs. Therefore, the heating and cooling load is required to be larger than the electric vehicle. As a result, the energy consumed by the heating and cooling system is larger than the passenger electric car in order to satisfy the heat comfort required by passengers. In order to overcome these disadvantages, we performed research using an efficient integrated air conditioning system. Finally, the design and analysis of a heat pump system for heating and a electrical compressor for cooling need to be proceed to develop a high-efficiency air conditioning system for improving the commerciality of 1 ton-class electric trucks and expanding the industrial ecosystem in the electric truck sector.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.42-51
• /
• 2001

Vehicle detection is the basic of traffic monitoring. Video based systems have several apparent advantages compared with other kinds of systems. However, In video based systems, shadows make troubles for vehicle detection, especially active shadows resulted from moving vehicles. In this paper, a new method that combines background subtraction and edge detection is proposed for vehicle detection and shadow rejection. The method is effective and the correct rate of vehicle detection is higher than 98% in experiments, during which the passive shadows resulted from roadside buildings grew considerably. Based on the proposed vehicle detection method, vehicle tracking, counting, classification and speed estimation are achieved so that traffic parameters concerning traffic flow is obtained to describe the load of each lane.

• Journal of Korean Society of Transportation
• /
• v.19 no.6
• /
• pp.161-170
• /
• 2001

Vehicle detection is the basic of traffic monitoring. Video based systems have several apparent advantages compared with other kinds of systems. However, In video based systems, shadows make troubles for vehicle detection. especially active shadows resulted from moving vehicles. In this paper a new method that combines background subtraction and edge detection is proposed for vehicle detection and shadow rejection. The method is effective and the correct rate of vehicle detection is higher than 98(%) in experiments, during which the passive shadows resulted from roadside buildings grew considerably. Based on the proposed vehicle detection method, vehicle tracking, counting, classification and speed estimation are achieved so that traffic information concerning traffic flow is obtained to describe the load of each lane.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.1-8
• /
• 2013

This paper implements an integrated vehicle chassis system of ACC(Adaptive Cruise Control) and LKS(Lane Keeping System) based on OSEK OS to vehicle operating system and analyzes its performance through experiments. In recent years active safety and advanced driver assistance system has discussed to improve safety of vehicle. Among the rest, We integrate ACC that controls longitudinal velocity of vehicle and LKS that assists a vehicle in maintaing its driving lane, then implement integrated control system in vehicle. Implemented control system uses OSEK/VDX proposed standard, which is aiming at reusability and safety of software for vehicle and removal hardware dependence of application software. Redesigned control system based on OSEK OS, which is supported by OSEK/VDX, can manage real-time task, process interrupt and manage shared resource. We show by results performed EILS(ECU-In-the-Loop Simulation) that OSEK OS-based integrated controller of ACC and LKS is equivalent conventional integrated controller of ACC and LKS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.128-141
• /
• 2018

In this paper, a methodology to analyze the potential safe benefit of six cooperative driver assistance systems via V2V (vehicle-to-vehicle) communications is proposed. Although it is quite necessary to assess social impact with respect to new safety technologies for cooperative vehicles with V2V communications, there are few studies in Korea to predict the quantitative safety benefit analysis. In this study, traffic accident scenarios are classified based on traffic fatality between passenger cars. The sequential collision type is classified for a multiple pile-up with respect to collision direction such as forward, side, head-on collisions. Then movement of surrounding vehicle is considered for the scenario classification. Next, the cooperative driver assistance systems such as forward collision warning, blind spot detection, and intersection movement assistance are related with the corresponding accident scenarios. Finally, it is summarized how much traffic fatality may be reduced potentially due to the V2V communication based safety services.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.133-140
• /
• 2017

In this paper, we has proposed an automatic vehicle monitoring system based on computer vision technology. The real-time display system has displayed a system that can be performed in automatic monitoring and control while meeting the essential requirements of ITS. Another advantage has that for a powerful vehicle tracking, the main obstacle handing system, which has the shadow tracking of moving objects. In order to obtain all kinds of information from the tracked vehicle image, the vehicle must be clearly displayed on the surveillance screen. Over time, it's necessary to precisely control the vehicle, and a three-dimensional model-based approach has been also necessary. In general, each type of vehicle has represented by the skeleton of the object or wire frame model, and the trajectory of the vehicle can be measured with high precision in a 3D-based manner even if the system has not running in real time. In this paper, we has applied on segmentation method to vehicle, background, and shadow. The validity of the low level vehicle control tracker was also detected through speed tracking of the speeding car. In conclusion, we intended to improve the improved tracking method in the tracking control system and to develop the highway monitoring and control system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.546-548
• /
• 2019

In recent days, vehicle safety technologies for supporting safe vehicle driving attract public attention. This paper proposes multi-log platform based vehicle safety system (MLPVSS) that analyzes multi-log data (i.e., log-data on human, object, and place) and supports vehicle safety. The MLPVSS gathers sensor data and image data on the human, object, and place, and then generates multi-log data that are context-aware data on the human, object, and place. The MLPVSS can detect, predict, and response vehicle dangers. The MLPVSS can contribute to reduce car accidents.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.447-454
• /
• 2013

As the surveillance CCTVs are increasing every year, big data image processing for the CCTV image data has become a hot issue. In this paper, we propose a Hadoop-based big data image processing technique to recognize a vehicle number from a large amount of automatic number plate images taken from CCTVs. We also implement the vehicle route tracking system that displays the moving path of the searched vehicle on Google Maps with the related information together. In order to evaluate the performance we compare and analysis the vehicle number recognition time for a lot of CCTV image data in Hadoop and the single PC environment.