• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.625-631
• /
• 2008

Correct evaluation of cut and fill volume of soil is one of the most important factors which controls construction cost in enormous construction sites. To achieve accurate computation of soil volume in construction site precise surveying is required, however most of construction sites adopt existing optical surveying instruments such as Total Station. The problem when using these optical instruments in construction sites is that these instruments take longer time in data acquisition. Due to insufficiency of computation time accurate and precise observation cannot be accomplished with these equipments. As a result roughly calculated earthwork volume may cause arguments between contractors and supervisors in the matter of reduction or increasement of total construction cost. In this study VRS-RTK Surveying is adopted to perform fast and accurate in-situ surveying for rapid computation of soil volume. This VRS-RTK Surveying system is proved to have more accurate three dimensional coordinates with high density and better economical solution with less manpower.

• Korean Journal of Remote Sensing
• /
• v.23 no.3
• /
• pp.161-169
• /
• 2007

A study was conducted in the Hong Kong with the aim of deriving an algorithm for the retrieval of suspended sediment (SS) and sea surface salinity (SSS) concentrations from Aqua/MODIS level 1B reflectance data with 250m and 500m spatial resolutions. 'In-situ' measurements of SS and SSS were also compared with coincident MODIS spectral reflectance measurements over the ocean surface. This is the first study of SSS modeling in Southeast Asia using earth observation satellite images. Three analysis techniques such as multiple regression, linear regression, and principal component analysis (PCA) were performed on the MODIS data and the 'in-situ' measurement datasets of the SS and SSS. Correlation coefficients by each analysis method shows that the best correlation results are multiple regression from the 500m spatial resolution MODIS images, $R^2$= 0.82 for SS and $R^2$ = 0.81 for SSS. The Root Mean Square Error (RMSE) between satellite and 'in-situ' data are 0.92mg/L for SS and 1.63psu for SSS, respectively. These suggest that 500m spatial resolution MODIS data are suitable for water quality modeling in the study area. Furthermore, the application of these models to MODIS images of the Hong Kong and Pearl River Delta (PRO) Region are able to accurately reproduce the spatial distribution map of the high turbidity with realistic SS concentrations.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.60-67
• /
• 2011

This paper presents an in-situ correction method to compensate for the position error of an autonomous underwater vehicle (AUV) near the sea floor. AUVs generally have an inertial navigation system assisted with auxiliary navigational sensors. Since the inertial navigation system shows drift in position without the bottom reflection of a Doppler velocity log, external acoustic positioning systems, such as an ultra short baseline (USBL), are needed to set the position without surfacing the AUV. The main concept of the correction method is as follows: when the AUV arrives near the sea floor, the vehicle moves around horizontally in a circular mode, while the USBL transceiver installed on a surface vessel measures the AUV's position. After acquiring one data set, a least-square curve fitting method is adopted to find the center of the AUV's circular motion, which is transferred to the AUV via an acoustic telemetry modem (ATM). The proposed method is robust for the outlier of USBL, and it is independent of the time delay for the data transfer of the USBL position with the ATM. The proposed method also reduces the intrinsic position error of the USBL, and is applicable to the in-situ calibration as well as the initialization of the AUVs' position. Monte Carlo simulation was conducted to verify the effectiveness of the method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.145-154
• /
• 2017

In recent years, demand for 1 / 1,000 digital map production has increased in various fields such as construction and urban planning. As a result, the use of low-cost non-metric cameras that replace expensive aerial photogrammetry equipment is required. In Korea, researches are being continuously carried out to produce a large scale digital map by photographing a small target area with a non-metric camera. However, due to the limitation of the accuracy of the non-metric camera, it is difficult to do digital mapping with stereoscopic photographs. In this study, we tried to verify the possibility of large-scale digital mapping to utilize non-metric camera for public survey. For this purpose, the accuracy of the digital mapping results of the non-metric camera and the results of the DMC camera were compared and analyzed. After performing in-situ self-calibration including 8 standard additional parameters, we plotted to a scale of 1/1,000 and confirmed that the RMSE is suitable for public survey accuracy of ${\pm}0.145m$ in horizontal and ${\pm}0.153$ m in vertical.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.475-488
• /
• 2018

Surveying urban tributary vegetation is based mainly on field sampling at present. The tributary vegetation survey integrating UAV NIR(Unmanned Aerial Vehicle Near Infrared Radiance) imagery and in-situ point photo has received only limited attentions from the field ecologist. The reason for this could be the largely undemonstrated applicability of UAV NIR imagery by the field ecologist as a monitoring tool for urban tributary vegetation. The principal advantage of UAV NIR imagery as a remote sensor is to provide, in a cost-effective manner, information required for a very narrow swath target such as urban tributary (10m width or so), utilizing very low altitude flight, real-time geo-referencing and stereo imaging. An exhaustive and realistic comparison of the two techniques was conducted, based on operational customer requirement of urban tributary vegetation survey: synoptic information, ground detail and quantitative data collection. UAV NIR imagery made it possible to identify area-wide patterns of the major plant communities subject to many different influences (e.g. artificial land use pattern), which cannot be acquired by traditional field sampling. Although field survey has already gained worldwide recognition by plant ecologists as a typical method of urban tributary vegetation monitoring, this approach did not provide a level of information that is either scientifically reliable or economically feasible in terms of urban tributary vegetation (e.g. remedial field works). It is anticipated that this research output could be used as a valuable reference for area-wide information obtained by UAV NIR imagery in urban tributary vegetation survey.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.873-884
• /
• 2013

This study was carried out to establish the conservation plan of specific plants by surveying and analyse the individuals and the environment of habitats on specific plants designated by Juwangsan national park office. The specific plants were 14 species including Berchemia berchemiaefolia, Hylotelephium ussuriense, Aristolochia manshuriensis, Lilium cernuum, Thalictrum coreanum, Exochorda serratifolia, Lilium distichum, Aristolochia contorta, Jeffersonia dubia, Eleutherococcus senticosus, Salix chaenomeloids, Eranthis stellata, Scopolia japonica, and Paeonia japonica. The habitats of specific plants were 40 sites including Berchemia berchemiaefolia of 11 sites, Hylotelephium ussuriense of 8 sites, Lilium cernuum and Thalictrum coreanum of each 3 sites, Exochorda serratifolia of 2 sites, and Lilium distichum, Aristolochia contorta, Jeffersonia dubia, Eleutherococcus senticosus, Salix chaenomeloids, Eranthis stellata, Scopolia japonica and Paeonia japonica of each 1 site. The altitude was the most in 300~400 m. In direction, NW was the most, and it showed SW in that order. The slope angle was the most in 0~10%, and the cliff showed in that order. In the results of species composition by stratum layer, Berchemia berchemiaefolia had the most, 15 species, in tree layer. In shrub and herb layer, this had the most as 20 species and 29 species, too. The species that occupied the largest size was Salix chaenomeloids in 2,500 $m^2$, and Jeffersonia dubia showed 1,500 $m^2$ in that order. The conservation of specific plants is to accomplish the ex situ and in situ conservation at the same time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.205-211
• /
• 2018

Remote estimation of water quality via radiometric instruments provides a convenient means for monitoring environmental changes in water bodies in wide areas. Combined with platforms such as satellite, manned/unmanned vehicles, it reduces the measurement cost and time for acquiring water quality information on the interested target areas. To develop accurate retrieval algorithms, however, acquisition of in-situ measurements from various optical environment is critical. In this study, hyperspectral radiometric measurements, the coincident water quality variables, and its optical properties were obtained to analyze the optical environment of the study area. Field data collected around the Tongyeong area showed that the area has optically complex environment, with occasional outbreak of red tide in summer seasons. Effect of water constituents on the optical variables (remote sensing reflectance and absorption coefficients) were qualitatively analyzed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.2
• /
• pp.31-48
• /
• 2014

This study is carried out to offer the raw data for conservation and management of tidal flat ecosystem by surveying and analysing the flora distributed in Daesong tidal flat wetland, Ahnsan-si, Gyeonggi-do coast, Korea. The results of surveying the flora were recorded as 186 taxa including 45 families, 121 genera, 170 species, 14 varieties and 2 forms. The halophytes checked around this site were 20 taxa including Atriplex gmelinii, Salicornia europaea, Suaeda glauca, Suaeda japonica, Phragmites communis, Carex scabrifolia and so forth. Polygonum bellardii that species had ecological value was the specific plant by floristic region. The growth locations of halophytes were 11 taxa of upper, 4 taxa of high tide line and 5 taxa of lower. The naturalized plants were 42 taxa including Phytolacca americana, Chenopodium glaucum, Melilotus alba, Veronica persica, Bidens pilosa, Leptochloa fusca and so forth. Because Aster subulatusand Leptochloa fusca grew a upper tidal flat wetland, they had the characteristics of halophytes. The focuses on the management of Daesong wetland were halophytes and naturalized plants. Firstly, to maintain a halophytes communities, we will sow the halophytes seeds and plant the individuals. And In-Situ conservation was applied to Polygonum bellardii habitat. Secondly, to prevent the genesis of naturalized plant, we will don't disturb around the wetland environment. The invasive alien plant, Lactuca scariola, was removed by periodic monitoring and purification activity.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.249-255
• /
• 2007

The building of spatial database such as digital maps has been extensively achieved as a base of geographic information system. However, in the GIS system built by the organizations including local autonomous entities, there are some problems technically and systematically for a promptly updating of GIS DB. This research is to develop the object-oriented database updating system to efficiently update the spatial data at any time for a small area. It could be managed the history of spatial database such as creation, modification and deletion at a object level using the UFID of spatial data. This system could help to modify or update the changed geographical features in an office or in-situ promptly. Finally, it could be made the efficient updating manner of geographic data and the assurance of newest database.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.788-792
• /
• 2009

Railroad is well known for eco-friendly transportation system. But, for past few decades, there might be happened many contamination acts in railway facility sites. Industrial and municipal solid wastes produced to maintain and fix trains were dumped to underground of railroad depot area. To develop and reconstruct this area, we should remediate the contaminated soil and ground water. This study was conducted to evaluate the soil pollution status of railroad depot and propose the optimum remediation processes. Our investigation showed that main pollutants sources were TPH and some heavy metals from the dump site. The surveying results for the soil under rail track and crossing nose areas showed TPH contamination from crossing nose area causing lubricant agent. It could be use and rehabilitate the railroad facility areas to an intended purpose with an application of well designed in-situ and ex-situ remediation processes.