• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.310-318
• /
• 2006

In this study, we investigate the feasibility of in-situ crack propagation by using a double cleavage drilled compression (DCDC) specimen showing a slow crack velocity down to 0.03 mm/s under 0.01 mm/s of displacement control. Finite element analysis predicted that the DCDC specimens would show at least 4.3 fold delayed crack initiation time than conventional tensile fracture specimens under a constant loading speed. Using DCDC specimens, we were able to observe the in-situ crack propagation process in a particle reinforced transparent polymer composite. Our results confirmed that the DCDC specimen would be a good candidate for the in-situ observation of the behavior of particle reinforced composites with slow crack velocity, such as the self-healing process of micro-particle reinforced composites.

• 자원환경지질
• /
• 제56권2호
• /
• pp.115-123
• /
• 2023

본 연구는 Drost et al. (2018)이 제안한 LA-ICP-MS를 이용한 새로운 'image-mapping' in-situ U-Pb 연대측정법을 소개하고, 국내 전기고생대 조선누층군 시료를 대상으로 처음 적용하여 결정한 절대연대 결과 사례를 통해 이 방법의 특성과 활용성을 알리고자 한다. 탄산염광물을 대상으로 하는 'image-mapping' in-situ U-Pb 연대측정법은 미세조직 관찰을 기초로 미소영역의 'image-mapping' 법을 적용하여, 기존의 점 분석(spot analysis) in-situ 분석법과는 달리, 신뢰성 높은 절대연대를 결정할 수 있을 뿐 아니라, 생성 이후 일어난 복수의 지질학적 '사건' 절대연대도 결정할 수 있다. 막골층과 대기층 탄산염광물로부터 퇴적연대와 함께 복수의 퇴적 이후의 연대를 결정한 적용 사례에서 이를 확인하였다. 따라서 이 같은 'image-mapping' in-situ U-Pb 연대측정법이 전 지질시대에 걸쳐 다양한 지질학적 환경에서 존재하는 다양한 형태의 탄산염광물 절대연대 결정에 적용된다면, 새로운 지질학적 연대정보 확보가 가능할 것이다.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.63-69
• /
• 2009

This paper provides the engineer with a simple design method dealing with situations arise where in-situ reinforced concrete joints are cast between hollow core units. Using finite element method, hollow core slabs with wide in-situ RC joints under point load and line loads are analysed. In addition, some important behavioural characteristics of the floor slab subjected to line and point loads are investigated. In-situ reinforced concrete joint causes reduction of load distribution for remote units because distance to the remote units from the point of load is increased, while the portion of load distribution carried by loaded unit increases. Also, it was turned out load distribution factors for point load and line loads are almost same. Finally, we suggest a simple analytical method, which can determine load distribution factors using normalized deflections by regression analysis for design purposes.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.73-83
• /
• 2017

본 연구는 반추동물 사료로서 한국에서 생산된 부존사료자원 15종의 화학적 조성, 소화율 그리고 에너지 가를 평가하기 위하여 실시하였다. 반추위 그리고 십이지장 캐뉼라가 장착된 거세한우 3두(평균체중 $520{\pm}20.20kg$)를 개별 계류식우사에 공시한 후 14일의 순치기간과 3일간의 시험기간을 두었다. 실험 방법으로는 화학조성 분석법, in situ 나일론백과 모바일백 방법을 이용하였다. 사료 내 화학적 조성을 분석한 결과, 엿밥, 깻묵, 장유박 및 두유박의 조단백질 함량은 30% 이상이었다. In situ 나일론백을 이용한 사료의 분해 특성을 분석한 결과, 비트펄프, 맥주박, 커피박, 엿밥, 수수겨, 임자박, 라면박 및 두유박의 반추위 미분해 단백질 함량은 50% 이상이었다. In situ 모바일백을 이용한 사료 내 가소화 영양소총량(TDN)의 분석은 비트펄프, 맥주박, 막걸리박, 수수겨, 깻묵, 라면박, 미강, 장유박, 비지, 두유박 및 밀기울이 50% 이상인 것으로 관찰되었다. 요약하자면, 상기 부존사료자원은 배합사료 또는 조사료를 대체할 수 있는 훌륭한 사료자원으로서의 높은 잠재적 가치를 가지고 있음을 시사하고 있다. 따라서 본 연구에서 얻은 부존사료자원의 화학적 조성, 소화율 및 에너지 가를 반추동물 섬유질배합사료 제조를 위한 기초 자료로 활용하고 이를 통해 사료효율 향상, 사료비용 절감 및 환경오염 감소에 기여하고자 한다.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.330-336
• /
• 2018

In this study, a membrane electrode assembly(MEA) composed of three electrodes(anode, cathode, and reference electrode) is designed to investigate the effects of methanol concentration on the overpotentials of anode and cathode in direct methanol fuel cells(DMFCs). Using the three-electrode cell, in-situ analyses of the overpotentials are carried out during direct methanol fuel cell operation. It is demonstrated that the three-electrode cell can work effectively in transient state operating condition as well as in steady-state condition, and the anode and cathode exhibit different overpotential curves depending on the concentration of methanol used as fuel. Therefore, from the real-time separation of the anode and cathode overpotentials, it is possible to more clearly prove the methanol crossover effect, and it is expected that in-situ analysis using the three-electrode cell will provide an opportunity to obtain more diverse results in the area of fuel cell research.

• Geomechanics and Engineering
• /
• 제9권1호
• /
• pp.101-113
• /
• 2015

Saturated soil hydraulic conductivity is a very important soil parameter in numerous practical engineering applications, especially rainfall infiltration and slope stability problems. This parameter is difficult to measure since it is very highly sensitive to various soil conditions. There have been many analytical and empirical formulas to predict saturated soil hydraulic conductivity based on experimental data. However, there have been few studies to investigate in-situ hydraulic conductivity of weathered granite soils, which constitute the majority of soil slopes in Korea. This paper introduces an estimation method to derive saturated hydraulic conductivity of Korean weathered granite soils using in-situ experimental data which were obtained from a variety of slope areas of South Korea. A robust regression analysis was performed using different physical soil properties and an empirical solution with an $R^2$ value of 0.9193 was suggested. Besides that this research validated the proposed model by conducting in-situ saturated soil hydraulic conductivity tests in two slope areas.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.552-554
• /
• 2003

The development of high performance single nanoparticle ion trap (SNIT) apparatus for studying in-situ dynamics of single nanoparticles in controlled environments is described. The performance of SNIT apparatus has been evaluated for 500 nm SiO₂particles. The mass resolution of ~100 ppm and the capability of varying the charge states independently have been demonstrated.

• Bulletin of the Korean Chemical Society
• /
• 제8권3호
• /
• pp.133-137
• /
• 1987

Polysiloxane SE-54 liquid phase was immobilized on the support surface as coated in thin film via in-situ cross-linking. The cross-linking between liquid molecules was initiated by dicumylperoxide. Among the supports investigated, only Chromosorb W provided the cross-linkable surface. The optimal in-situ cross-linking was achieved when Chromosorb W was coated with 5% (w/w) SE-54 and cross-linked with 1% (w/w) dicumylperoxide. The cross-linked support was useful for the trace analysis as well as for the trace enrichment.

• 산업기술연구
• /
• 제28권B호
• /
• pp.111-116
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, and it has been developed to a wire-line system at their second generation. The current up-to-date system is more compact and is able to be operated by all-in-one system. With a progress in a hardware system, the software for analyzing in-situ stress regime has also been progressed. The shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.186-188
• /
• 2005

Because forest fire changes the direction according to the environmental elements, it is difficult to predict the direction of it. Currently, though some researchers have been studied to which predict the forest fire occurrence and the direction of it, using the remote detection technique, it is not enough and efficient. And recently because of the development of the sensor technique, a lot of In-Situ sensors are being developed. These kinds of In-Situ sensor data are used to collect the environmental elements such as temperature, humidity, and the velocity of the wind. Accordingly we need the prediction technique about the environmental elements analysis and the direction of the forest fire, using the In-Situ sensor data. In this paper, as a technique for predicting the direction of the forest fire, we propose the correlation analysis technique about In-Situ sensor data such as temperature, humidity, the velocity of the wind. The proposed technique is based on the clustering method and clusters the In-Situ sensor data. And then it analyzes the correlation of the multivariate correlations among clusters. These kinds of prediction information not only helps to predict the direction of the forest fire, but also finds the solution after predicting the environmental elements of the forest fire. Accordingly, this technique is expected to reduce the damage by the forest fire which occurs frequently these days.