• 한국가시화정보학회지
• /
• 제19권1호
• /
• pp.36-42
• /
• 2021

This study measured the velocity of magnetic particles inside the power generation using external heat sources. Single Plane Illumination Microscopy (SPIM) was used to measure magnetic particles that are simultaneously affected by bubbly flow and magnetic field. It has the advantage of reducing errors due to particle superposition by illuminating the thin light sheet. The hydraulic diameter of the power generation is 3mm. Its surface is covered with a coil with a diameter of 0.3 mm. The average diameter of a magnetic particle is 200nm. The excitation and emission wavelengths are 530 and 650nm, respectively. In order to find out the flow characteristics, a total of four velocity fields were calculated in wide and narrow gap air bubbles, between the wall and the air bubble and just below the air bubble. Magnetic particles showed up to 8.59% velocity reduction in the wide gap between air bubbles due to external magnetic field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1177-1184
• /
• 2002

In this paper, power flow analysis method on the various types of thin shell has been developed to solve vibrational Problems in the medium to high frequency ranges. Energy governing equations have been derived both for out-of plane and in-plane waves in thin shell. These results have been numerically applied to predict the vibrational energy density and intensity distributions of cylindrical, spherical and doubly-curved shells.

• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.68-75
• /
• 2003

The purpose of this study is to find out the expression style of space in Rietveld's early works in comparison with Mondrian's paintings. Through investigating the development of their works and analyzing the composition and disposition type of elements such as point, line, plane, color in the selected works, we can draw the following conclusions. .First, Rietveld pursues the dissolution of traditional volume and the de-composition of elements as Mondrian does. Second, the painterly property of plane is emphasized by the projection of separately floating elements on the picture plane. Third, the separating the layer of lines from the layer of planes and the re-combination of these two layers present the superimpositional image of three-dimensional objects. This leads into new conception of architectural space and develops the transparency and the extension of plan in modem architecture.

• Structural Engineering and Mechanics
• /
• 제8권4호
• /
• pp.421-438
• /
• 1999

In this paper a practical limit load estimating procedure is proposed for general pipe-elbow structures subjected to complex loading (in-plane and out-of-plane bending, internal pressure and axial force). The explicit calculating formulae are presented on the basis of theoretical analysis combined with numerical simulation. Von Mises' yield criterion is adopted in both analytical and numerical calculation. The finite element examination shows that the method provides a simple but satisfactory prediction of pipe structures in engineering plastic analysis.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.177-184
• /
• 2012

ESPI는 비접촉 비파괴 방식으로 측정 대상체의 진동이나 변형에 따른 3차원 형상 정보의 취득에 효과적으로 사용되어 왔다. 측정 대상체와 계측 환경에 따라 면내, 면외, 전단간섭 등으로 구분할 수 있으며, 간섭계를 구성하는 광소자의 형태에 따라 벌크형과 광섬유형으로 나뉜다. 광섬유형 시스템은 크기가 작고 휴대하기 편하여 시스템 구성 및 정렬이 매우 용이하다. 본 논문에서는 광섬유 면외 ESPI를 이용한 광학계를 구성하였고, PZT를 이용하여 위상 변조를 ${\pi}/2$만큼 주기적으로 가하여 CCD 카메라에서 이미지를 획득하였다. 획득한 스페클 패턴 이미지는 후처리 과정을 통해 측정 대상체의 3차원 위상 정보를 얻게 된다. 내부 결함이 존재하는 압력용기에 질소 가스를 주입하여 변화되는 phase map을 관찰하였고, 또한 phase map의 후처리를 통하여 압력에 따른 대상체의 변화를 3차원으로 확인하였다.

• Journal of Magnetics
• /
• 제9권2호
• /
• pp.40-46
• /
• 2004

The magnetic properties of sputtered ($Ni_{83}Fe_{17}/Au/Co/Au$) multilayers with various thicknesses of Au (0.5 {\leq} t_{Au} {\leq} 3 nm), Ni-Fe ($1{\leq}t_{Ni-Fe}{\leq}4nm$) and Co ($0.2{\leq}t_{co}{\leq}1.5nm$) layers were characterized. An alternating in-plane and out-of-plane anisotropy of the ferromagnetic layers was achieved for the structures ($t_{Au}{\geq}1.5nm$) showing a weak coupling between the Ni-Fe layers with an in-plane anisotropy and the Co layers ($0.3{\leq}t_Co{\leq}1.2nm$) with a perpendicular anisotropy. For such a structure, a detailed discussion on the GMR effect is presented, relating to the magnetization reversal from a mutually perpendicular magnetic configuration at the remanence to a parallel one at the saturation. An influence of the dense labyrinth domain structure on the magnetoresistance effect is also addressed.

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.153-164
• /
• 2000

Numerical studies were carried out to investigate long-term behavior of flat plates, subjected to combined in-plane compressive and transverse loads. For the numerical studies, a computer program of nonlinear finite element analysis was developed. It can address creep and shrinkage as weel as geometrical and material nonlinearity, and also it can address various load combinations and loading sequences of transverse load, in-plane compressive load and time. This numerical method was verified by comparison with the existing experiments. Parametric studies were performed to investigate the strength variations of flat plates with four parameters; 1) loading sequence of floor load, compressive load and time 2) uniaxial and biaxial compression 3) the ratio of dead to live load 4) span length. Through the numerical studies, the behavioral characteristics of the flat plates and the governing load combinations were examined. These results will be used to develop a design procedure for the long-term behavior of flat plates in the future.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.78-83
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interformetry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. However, the existing ESPI methods that are based on dual-exposure, real-time and time-average method have difficulties for accurate measurement of structure, due to irregular intensity and shake of phase. Therefore, phase shifting method has been proposed in order to solve this problem. About the method, the path of reference light in interferometry is shifted and added to least square fitting method to make the improvement in distinction and precision. This proposed method is applied to measure in -plane displacement that is compared with the previous method. Also, Used as specimen AS4/PE따 [30/=30/90]s was analyzed by ESPI based on real-time to determine the characteristics of vibration under no-load and tension. These results are quantitatively compared with those of FEM analysis inmode shapes.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.50-55
• /
• 2015

We report design and simulation of a two-dimensional (2D) silicon-based nanophotonic crystal as an optical insulator to enhance the light emission efficiency of light-emitting diodes (LEDs). The device was designed in a manner that a triangular array silicon photonic crystal light insulator has a square trench in the middle where LED can be placed. By varying the normalized radius in the range of 0.3-0.5 using plane wave expansion method (PWEM), we found that the normalized radius of 0.45 creates a large band gap for transverse electric (TE) polarization. Subsequently a series of light propagation simulation were carried out using 2D and three-dimensional (3D) finite-difference time-domain (FDTD). The designed silicon-based light insulator device shows optical characteristics of a region in which light propagation was forbidden in the horizontal plane for TE light with most of the visible light spectrum in the wavelength range of 450 nm to 600 nm.