• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.304-311
• /
• 2001

Unreinforced masonry is widely used as a structural material in residential constructions and known to have poor seismic performance in the out-of-plane rather than in-plane behavior. In countries of lower seismicity such as Korea, it is necessary to check the possibility of the mode of the out-of-plane failure. Though face loading is a major cause of the failure of masonary walls, Korean Seismic Code does not include provision for face-loaded unreinforced masonry walls. This paper briefly reviews the concept of analysis for unreinforced masonry walls subjected to face-load excitation proposed by Priestley, and its applicatility to Korean case.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.585-598
• /
• 2021

The course-keeping stability of a high speed planing boat should be considered at the design stage for its safe operations. The shape of waterjet intake plane is one of important design parameters of a waterjet propelled planing boat. That has significant influences on the stern flow patterns and pressure distributions. In this study, the effects of the waterjet intake shapes of planing boats on the course-keeping stabilities are investigated. Two kinds of designed planing boats have the same dimensions, but there are differences in waterjet intake plane shapes. Captive and free-running model tests, Computational Fluid Dynamics (CFD) analyses are carried out in order to estimate their hydrodynamic performances including course-keeping stabilities. The results show that the flat and wide waterjet intake plane of the initially designed boat makes the course-keeping stability worse. The waterjet intake shape is redesigned to improve the course-keeping stability. The improved performances are confirmed by free-running model tests and full-scale trials.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2311-2317
• /
• 2011

In this paper, we study the temperature change of a ${\mu}$-bolometer focal plane array with a capacitive transimpedance amplifier bias cancellation circuit. Thermal analysis is essential to understand the performance of a ${\mu}$-bolometer focal plane array, and to improve the temperature stability of a focal plane array characteristics. In this study, the thermal analyses of a ${\mu}$-bolometer and its two reference detectors are carried out as a function of time. The analyses are done with the $30{\mu}m$ pitch $320{\times}240$ focal plane array operating of 60 Hz frame rate and having a columnwise readout. From the results, the temperature increase of a ${\mu}$-bolometer in FPA by an incident IR is estimated as $0.689^{\circ}C$, while the temperature increase by a pulsed bias as $7.1^{\circ}C$, which is about 10 times larger than by IR. The temperature increase of a reference detector by a train of bias pulses may be increased much higher than that of an active ${\mu}$-bolometer. The suppression of temperature increase in a reference bolometer can be done by increasing the thermal conductivity of the reference bolometer, in which the selection of thermal conductivity also determines the range of CTIA output voltage.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.169-178
• /
• 1991

본 연구에서는 평면 변형률 강소성 유한요소법을 이용하여 유한요소 수식화를 유도하고 금형이 해석저인 함수로 묘사되는 드로잉 공정을 해석하고, 금형이 해석적인 함수로 묘사되지 않는 실제적인 자동차 성형품의 드로잉 공정을 해석하여 기존의 결과 와 비교하여 본 방법의 타당성을 검토하였다.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.199-210
• /
• 2021

The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical method and FEM. The FG layer is made of non-homogeneous material with an isotropic stress-strain law with exponentially varying properties. It is assumed that the contact at the FG layer-half plane interface is frictionless, and only the normal tractions can be transmitted along the contacted regions. The body force of the FG layer is considered in the study. The FG layer was positioned on the homogeneous half plane without any bonds. Thus, if the external load was smaller than a certain critical value, the contact between the FG layer and half plane would be continuous. However, when the external load exceeded the critical value, there was a separation between the FG layer and half plane on the finite region, as discontinuous contact. Therefore, there have been some steps taken in this study. Firstly, an analytical solution for continuous and discontinuous contact cases of the problem has been realized using the theory of elasticity and Fourier integral transform techniques. Then, the problem modeled and two-dimensional analysis was carried out by using ANSYS package program based on FEM. Numerical results for initial separation distance and contact stress distributions between the FG layer and homogeneous half plane for continuous contact case; the start and end points of separation and contact stress distributions between the FG layer and homogeneous half plane for discontinuous contact case were provided for various dimensionless quantities including material inhomogeneity, distributed load width, the shear module ratio and load factor for both methods. The results obtained using FEM were compared with the results found using analytical formulation. It was found that the results obtained from analytical formulation were in perfect agreement with the FEM study.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.388-394
• /
• 2014

In this paper, we propose a three-dimensional (3D) image correlator by use of computational integral imaging reconstruction based on the modified convolution property of periodic functions (CPPF) for recognition of partially occluded objects. In the proposed correlator, elemental images of the reference and target objects are picked up by a lenslet array, and subsequently are transformed to a sub-image array which contains different perspectives according to the viewing direction. The modified version of the CPPF is applied to the sub-images. This enables us to produce the plane sub-image arrays without the magnification and superimposition processes used in the conventional methods. With the modified CPPF and the sub-image arrays, we reconstruct the reference and target plane sub-image arrays according to the reconstruction plane. 3D object recognition is performed through cross-correlations between the reference and the target plane sub-image arrays. To show the feasibility of the proposed method, some preliminary experiments on the target objects are carried out and the results are presented. Experimental results reveal that the use of plane sub-image arrays enables us to improve the correlation performance, compared to the conventional method using the computational integral imaging reconstruction algorithm.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.834-841
• /
• 2004

Experimental study on the three-dimensional topology of hairpin packet structures in turbulent boundary layers were carried out. Two different Reynolds number based on momentum thickness, Re$\sub$$\theta$/=514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. Simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. The two Nd:Yag laser systems and three CCD cameras were synchronized to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment. Two counter-rotating vortex pair which reflects the cutting plane of hairpin legs are found both side of a strong streaky structure when the wall-normal plane cuts the hairpin head.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.104-106
• /
• 2003

다층의 산화물 박막으로 이루어진 coated conductor의 제조를 위하여 각층의 증착조건이 최적화되어야 한다. 가공/열처리를 통하여 2축배향성을 가지는 Ni 금속 기판위에 $Y_2O_3$, YSZ, $CeO_2$ 등의 산화물 완충층을 증착한 후 초전도층인 YBCO를 증착하였다. 12도와 8도의 in-plane fwhm (full width at half maximum)과 out-of-plane fwhm을 가지는 Ni 기판을 이용하여 13도와 4.5도의 in-plane 및 out-of-plane fwhm을 가지는 YBCO coated conductor를 제조하였다. 임계온도 (Tc), 임계전류 (Ic), 및 임계전류밀도 (Jc) 는 각각 84K, 3.3A, 및 $310,000\;A/cm^2$ 이었다.

• 한국자기학회지
• /
• 제7권5호
• /
• pp.274-279
• /
• 1997

전자산란실험에서 핵반응평면 밖에서의 (e, e', p) 측정을 위한 자기분광계가 고안되엇다. 이 자기분광계는 산란평면에서의 대칭축에 대한 방위각을 가진 네개의 분광계로 되어있다. 이 계기의 성능은 핵자 및 few body 핵계에서의 정밀측정을 위해 최적화되었다. 이 논문은 첫단계 작업으로 시제작된 한개의 자기분광계에 대한 이온-광학적 디자인과 그 계기를 사용하여 측정된 성능을 발표한다.

• 한국자기학회지
• /
• 제26권4호
• /
• pp.119-123
• /
• 2016

Cu 원자 4개를 포함한 cubane 구조의 분자자성체의 전기구조 및 자기적 성질을 제1원리의 범밀도함수법을 이용하여 계산하였다. 계산 된 결과, Cu 원자는 +2가를 가지며, 팔면체 배위자중 면내 짧은 4개의 배위산소원자로 인해 3d $x^2-y^2$ hole 궤도를 가지고 있었다. 스핀배열에 따른 총 에너지 계산에서 면내는 반강자성, 면간은 강자성 자기구조가 가장 안정되었다. 교환상호작용 J의 크기는 면내의 J가 훨씬 크고 반강자성 성질을 나타내었으며, 나머지 면간의 J값은 아주 작았다. 이러한 원인은 Cu $x^2-y^2$ hole 궤도정렬로 인하여 면내 강한 초교환상호작용의 결과이다.