• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• Journal of Marine Life Science
• /
• v.6 no.2
• /
• pp.106-116
• /
• 2021

To secure basic data by monitoring the growth of salmon (Oncorhynchus keta) released to the Taehwa River. After discharge, the characteristics of the young salmon distribution and migration rate habitat were investigated for two years. A total of 4 points [Sunbawi bridge (St.1), Guyeong bridge (St.2), Samho bridge (St.3), and Myeongchon bridge (St.4)] were investigated. The survey of 2017 indicating an increase of 10 mm in average length and 0.8 g in average weight, and the survey of 2018 indicating an increase of 10 mm in average length and 0.5 g in average weight. Among 39 species, 10 insectivorous and 12 omnivorous, are believed to compete with young salmon for food. 6, 5, 6 and 8 predatory fish species has emerged at each site, respectively. According to this study, it is believed that St.1 and St.2 points are more proper as discharge location of young salmon because these two points have less varied in depth, flow rate, salt concentration etc. In addition, it is thought that the night or dawn time in early January is the best discharge time of young salmon fish because predatory fish such as Korean piscivorous chub and bass etc. does not eat food actively at that time.

• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.873-887
• /
• 1996

Platelet-derived growth factor(PDGF) is one of the polypeptide growth fators. PDGF has been reported as a biological mediator which regulates activities of wound healing process including the cell proliferation, migration and metabolism. Recent studies indicated that demineralized root surface as the primary site for growth factor application has advantages over other application method, especially due to binding capacity of growth factor for exposed matrix component of deminera1ized dentin surface. The purpose of this study is to evaluate optimal application time of PDGF-BB on proliferation of human gingival fibroblasts using deminera1ized dentin surface as primary application site. Human gingival fibroblasts and dentin slabs were prepared from the first premolar tooth extracted for the orthodontic treatment, cells were cultured in DMEM/I0% FBS at the $37^{\circ}C$, 5% CO2 incubator. All of the dentin slabs were preconditioned with Tetracycline HCI(100mg/ml) solution and rinsed in PBS. In the cell proliferation experiment, experimental group was immersed in DMEM containing 10% FBS, 50ng/rnl PDGF-BB during different time(30sec, 1, 2, 4, 8 minutes) and dried. Cells at concentration of $1{\times}10^5$cells/ml were seeded in each culture well which contained dentin slabs and incubated for 6 hours. Then, all of the dentin slabs were moved into new 24 well culture dish and incubated for 24, 48, 72 hours. The cell counting was done by hemocytometer with inverted phase contrast microscope after trypsinization. The results were as follows : The application of PDGF-BB for 1, 2 min slightly increased the number of gingival fibroblasts, and the application of PDGF-BB for 4, 8 min prominently increased the number of gingival fibroblasts. The application of PDGF-BB for 4 min showed maximum proliferation rate of gingival fibroblasts at 24, 48, 72 hours, and the application of PDGF-BB for 8 min showed less proliferation rate of gingival fibroblasts compared to the application of PDGF-BB for 4 min at 24, 48, 72 hours. In conclusion, the application of PDGF-BB for 4 min appeared to be optimal to obtain maximum proliferation of gingival fibroblasts using demineralized dentin surface as primary applicaton site of PDGF-BB.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.1
• /
• pp.32-41
• /
• 2022

Various steps in the electrode production process, such as slurry mixing, slurry coating, drying, and calendaring, directly affect the quality and, consequently, mechanical properties and electrochemical performance of electrodes. Herein, a new method of slurry coating is developed: Double-coated electrode. Contrary to single-coated electrode, the cathode is prepared by double coating, wherein each coat is of half the total loading mass of the single-coated electrode. Each coat is dried and calendared. It is found that the double-coated electrode possesses more uniform pore distribution and higher electrode density and allows lesser extent of particle segregation than the single-coated electrode. Consequently, the double-coated electrode exhibits higher adhesion strength (74.7 N m^-1) than the single-coated electrode (57.8 N m^-1). Moreover, the double-coated electrode exhibits lower electric resistance (0.152 Ω cm^-2) than the single-coated electrode (0.177 Ω cm^-2). Compared to the single-coated electrode, the double-coated electrode displays higher electrochemical performance by exhibiting better rate capability, especially at higher C rates, and higher long-term cycling performance. Despite its simplicity, the proposed method allows effective electrode preparation by facilitating high electrochemical performance and is applicable for the large-scale production of high-energy-density electrodes.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4527-4542
• /
• 2023

The present microbial reinforcement of rock and soil exhibits limitations, such as uneven reinforcement effectiveness and low calcium carbonate generation rate, resulting in limited solidification strength. This study introduces electroosmosis as a standard microbial grouting reinforcement technique and investigates its solidification effects on microbial-reinforced uranium tailings. The most effective electroosmosis effect on uranium tailings occurs under a potential gradient of 1.25 V/cm. The findings indicate that a weak electric field can effectively promote microbial growth and biological activity and accelerate bacterial metabolism. The largest calcium carbonate production occurred under the gradient of 0.5 V/cm, featuring a good crystal combination and the best cementation effect. Staged electroosmosis and electrode conversion efficiently drive the migration of anions and cations. Under electroosmosis, the cohesion of uranium tailings reinforced by microorganisms increased by 37.3% and 64.8% compared to those reinforced by common microorganisms and undisturbed uranium tailings, respectively. The internal friction angle is also improved, significantly enhancing the uniformity of reinforcement and a denser and stronger microscopic structure. This research demonstrates that MICP technology enhances the solidification effects and uniformity of uranium tailings, providing a novel approach to maintaining the safety and stability of uranium tailings dams.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.161-170
• /
• 2012

To provide domestic values of input parameters in a safety assessment of radioactive waste disposal under domestic deep underground environments, various kinds of experiments have been carried out under KURT (KAERI Underground Research Tunnel) conditions. The input parameters were classified, and some of them were selected for this study by the criteria of importance. The domestic experimental data under KURT environments were given top priority in the data review process. Foreign data under similar conditions to KURT were also gathered. The collected data were arranged and the statistical calculations were processed. The properties and distribution of the data were explained and compared to foreign values in view of their validity. The following parameters were analysed: failure time and early time failure rate of a container, solubility of nuclides, porosity and density of the buffer, and distribution coefficients of nuclides in the geomedia, hydraulic conductivity, diffusion depth of nuclides, groundwater flow rate, fracture aperture, length of internal fracture, and width of faulted rock mass in the host rock.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.633-638
• /
• 2007

The Elaeagnus macrophylla is a stenoecious evergreen plant with nitrogen-fixing symbionts and its timing of fruit-ripening coincides with spring migration of many birds in southwestern Korea. To recognize bird species which eat fleshy fruits of the Elaeagnus macrophylla and to evaluate the effects of bird ingestion on seed germination and dispersal, we monitored birds and carried out germination experiments using its fruits and seeds from March to April 2007 at Hongdo Island, Jeonnam Province, Korea. As a result, eight species of birds including the Gray Starling (Sturnus cineraceus), the Brown-eared Bulbul (Hypsipetes amaurotis) and the Dusky Thrush (Turdus naumanni) ingested the fruits. Germination rate was enhanced but length of seed dormancy was instead shortened in ingested (collected from the feces of birds) and manually extracted seeds (obtained directly from the fruits) than in intact fruits collected directly from the plant. Moreover, the possible scale of seed dispersal by the frugivorous birds ranged up to 6.9 ha based on home ranges of starlings. Consequently, the Elaeagnus macrophylla supplies food resources for migratory birds, and the birds give the plant opportunities of new colonization. We suggest that this kind of interaction between the nitrogen-fixing plant and avian seed dispersers is applicable as a process of natural restoration in degraded coastal evergreen forests.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.223-229
• /
• 2017

This study analyzed the relationship between environmental factors and the temporal changes of the bird populations during the every January from 1999 to 2016 (18 years) in Donglim reservoir. 'Winter Waterbird Census of Korea' data by National Institute of Biological Resources were used for the bird population data, and principal component analysis and cluster analysis were used to analyze the changes of annual population. The average temperature of January and the average storage rate of the reservoir were used as environmental factors. According to the results of the study, the population changes in the study area can be explained by the increase and decrease of two water bird groups and a mountain bird group. The average temperature of the years when the population of water bird groups increased was more than $1.4^{\circ}C$ in comparison with the year when mountain birds increased. On the other hand, the influence of the water content was not clear. The visiting of Baikal Teal affected by temperature was a factor affecting the other group of water bird and a mountain bird group. The results of this study suggest that the temperature change affects the global spatial distribution of birds and the migration of large population species such as Baikal Teal affects species composition and populations of birds at local scale. Therefore, understanding of environmental changes at large scale and spatial distribution of species and flock contributes to understand the temporal variation of the bird population at regional or local scales.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.146-154
• /
• 2016

In this study, understanding the habitats on spot-billed duck that wintering-breed in the korea, which using the GPS-Mobile based Telemtry (WT-200), I tried to take advantage as the basic data of the protection and management of the habitats of the waterbirds of Korea. Study area is Gyeonggi-do Bokhacheon, Chonmichon, Chungcheongnam-do Gokugyochon, Chungcheongbuk-do Byeongcheoncheon, Jeollabuk-do Mangyunggang, which Five rivers and Jeju Island reservoir, I have attached the tracking of the location(WT -200) to the twenty-five spot-billed ducks. among twenty five ducks, twelve ducks moved to overseas countries, the arrival site was China, North Korea, Russia. Moving average distance was 683km, the largest distance was 1,238km. The average northbound starting date was April 26. The average daily movement distance of thirteen ducks remaining in the domestic country is $1.0{\pm}0.89km$, maximum travel distance was 23.8km. The average daily movement distance of wintering prior to average going north dating is a 0.9km, is the largest 14.6km, the breeding season is an average 1.3km, maximum was 14.4km. Spot-billed duck used the rivers in domestic country most frequently, following was rice field, a filed, reservoir. It used the river most frequently during the wintering period, in the breeding season it used paddy paddies most frequently. While wintering, during the day and night's utilization rate was the highest in the river, but utilization rate was incleased on filed, paddy filed at night. During breeding season, daytime and night's utilization rate was the highest but, utilization rate was increased on river and utilization rate was decreased on river. In accordance with time change, spot-billed duck showed different tendency in paddy fields, and they utilized the filed adjacent to rivers mostly.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.398-403
• /
• 1978

Squid was dried on the fluidized-bed in the drying chamber filled with solid particles which were also fluidized with hot-air, and effects of the fluidized particles, the squid's height from the grid and the drying temperature on the drying rate and quality of the squid were observed The mechanism of moisture transfer during the falling rate period was also derived. 1. Sodium chloride was found to be the most suitable fluidized particles and at an air velocity of 3.8 m/sec, optimal fluidization state of this particle was obtained. 2. Uniform profiles of temperature were obtained at a point 4 cm above the grid and the location of squid on the fluidized-bed observed to be suitable when it was 4 cm above the grid. 3. At an air velocity of 3.8 m/sec and when the location height of the squid on the fluidized-bed was 4 cm, the optimal temperature for the drying time which is required to reduce the moisture from 80.8% to 18-22% was 8.5 hours. 4. Drying data followed the empirical equation of unsteady state diffusion $log\;(\frac{W-We}{Wc-We})=-m{\theta}$ in the region of the moisture contents measured and the drying constant (m) was calculated as $0.32hr^{-1}$. These results suggested that the migration of moisture during the falling rate period is due to a diffusion type mechanism. 5. The short constant rate period was observed in the early stage and thereafter, drying was controlled by the falling rate period, and the time ratio of the fluidized bed drying to the through circulation drying for reducing the squid's moisture contents to the same level at the same drying temperature was 1 : 1.4 6. Comparisons of fluidized-bed dried squid and sun dried squid in sale showed that there was no significant change in qualities such as external appearance and hydrogen ion concentration of dry product.