• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.289-302
• /
• 1995

The purpose of this study was to estimate the shear bond strength and observe the fractured and interfacial surfaces of various dentin bonding agents used conjunction with a visible light cured composite. The senentytwo human premolars and molars extracted due to periodontal or orthodontic reasons were used and randomely divided into six groups. All the prepared dentin surfaces were treated with Superbond D-liner, Scotchbond Multi-Purpose, All-Bond 2 and Prisma Universal Bond 3 accroding to the manufacturer's instructions. Six specimens were then demineralized in 10 % HCl for 24 hours and the other six specimens were not demineralized in order to observe the interfacial surfaces with Hitachi X-450 SEM at 25Kv. Also shear bond strength were obtained using an Instron Testing Machine with a crosshead speed of 1mm/min. The following results were obtained : 1. Although shear bond strength of Superbond D-Liner(17.35 MPa) and Scotch-bond Multi-Purpose group(17.29 MPa) were higher than the All-Bond 2(12.80 MPa) and Prisma Universial Bond 3 (13.43 MPa), there were no significant statistic differences in the shear bond strength between 4 groups.(P<0.05) As a result of etching to dentin in Prism a Universial BOND 3 experimentally, the resin tag was formed, but shear bond strength was decreased. 2. The resin tag into the opened dentinal tubule was formed in Superbond D-Liner, Scotchbond Multi-Purpose, All-Bond 2(etching) and Prisma Universial Bond 3(etching), but not in the All-Bone 2 and Prism a Universial Bond 3(non-etching). 3. Strong, durable bonds between dentin and dentinal bonding agents are essential, not only resin tag into the dentinal tubules, but also hybrid layer.

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.70-74
• /
• 1992

Two crystal structures of ethylene (a= 12.272(2) ${\AA}$) and acetylene (a = 12.245(2) ${\AA}$) sorption complexes of dehydrated fully $Ca^{2+}$-exchanged zeolite A have been determined by single crystal X-ray diffraction techniques in the cubic space group, Pm3m at $21(1)^{\circ}C$. Their complexes were prepared by dehydration at $360^{\circ}C$ and $2{\times}10^{-6}$ Torr for 2 days, followed by exposure to 200 Torr of ethylene gas and 120 Torr of acetylene gas both at $24^{\circ}C$, respectively. The structures were refined to final R (weighted) indices of 0.062 with 209 reflections and 0.098 with 171 reflections, respectively, for which I > 3${\sigma}$(I). The structures indicate that all six $Ca^{2+}$ ions in the unit cell are associated with 6-oxygen ring of the aluminosilicate framework. Four of these extend somewhat into the large cavity where each is coordinated to three framework oxide ions and an ethylene molecule and/or an acetylene molecule. The carbon to carbon distance in ethylene sorption structure is 1.48(7) ${\AA}$ and that in acetylene sorption structure 1.25(8) ${\AA}$. The distances between $Ca^{2+}$ ion and carbon atom are 2.87(5) ${\AA}$ in ethylene sorption structure and 2.95(7) ${\AA}$ in acetylene sorption structure. These bonds are relatively weak and probably formed by the electrostatic attractions between the bivalent $Ca^{2+}$ ions and the polarizable ${\pi}$-electron density of the ethylene and/or acetylene molecule.

• Macromolecular Research
• /
• 제17권10호
• /
• pp.734-738
• /
• 2009

Biodegradable, pH-sensitive, glycol chitosan (GC) hydrogels were prepared using divinyl adipate (DVA) as a crosslinker and acetic acid as a catalyst. DVA has highly reactive double vinyl ester groups and GC contains a high density of hydroxyl groups, with two in every glucosamine unit. The transesterification reaction between vinyl esters and hydroxyl groups produced crosslinked GC hydrogels. The initial crosslinking reaction was monitored by measuring the viscosity of the reaction mixture. When DVA was added to the GC solution and heated to $50^{\circ}C$, the viscosity of the GC solution gradually increased, implying a crosslinking reaction and hydrogel formation. A new peak from the ester group was observed in the FTIR spectra of the GC hydrogels, confirming the crosslinking reaction. The synthesized GC hydrogel showed pH-dependent water absorbency, mainly due to the presence of amine groups ($-NH_2$) at the C-2 position of the glucosamine unit of GC. The water absorbency greatly increased at acidic pH and slightly decreased at alkaline pH. The GC hydrogel gradually degraded in $37^{\circ}C$ water due to hydrolysis of the ester bonds, which were intermolecular crosslinking sites. A red dye, 5-carboxyltetramethyl-rhodamine (CTMR), was entrapped in the GC hydrogels as a model compound. CTMR was released from GC hydrogels in two steps: an initial burst release mainly due to desorption and diffusion, and a second sustained release possibly due to gradual degradation.

• 공업화학
• /
• 제31권1호
• /
• pp.36-42
• /
• 2020

산화 공정이 피치의 열거동 특성에 미치는 영향을 규명하기 위하여 다양한 공정 온도에서 산화된 피치를 제조하였다. 피치의 열거동 특성은 thermogravimetric analysis (TGA)를 이용하여 분석하였으며, derivative thermogravimetry (DTG) 그래프 거동 변화에 따라 A (25~100 ℃), B (250~550 ℃), C (550~800 ℃) 세 구간으로 분석하였다. A 구간에서는 피치에 함유되어 있던 수분이 제거되면서 중량 감소가 발생하였다. B 구간에서 산화에 의하여 피치의 열적 안정성이 향상되었다. 이는 산화 온도가 증가할수록 피치의 방향족화도 및 분자량이 증가하였기 때문으로 판단된다. 반면, C 구간에서는 B 구간과 반대의 결과를 보였다. C 구간에서 열적 안정성이 저해된 것은 산화 공정에 의하여 피치에 도입된 C-OH, C-O-C, C=O 결합이 분해되고, 이에 의하여 발생한 산소 화합물이 피치의 연소 반응을 유도하였기 때문으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2711-2719
• /
• 2013

Hydrogen bonding interaction between alcohols and water molecules is an important characteristic in the aqueous solutions of alcohols. In this paper, a series of molecular dynamics simulations have been performed to investigate the aqueous solutions of low molecular weight alcohols (methanol, ethylene glycol and glycerol) at the concentrations covering a broad range from 1 to 90 mol %. The work focuses on studying the effect of the alcohols molecules on the hydrogen bonding of water molecules in binary mixtures. By analyzing the hydrogen bonding ability of the hydroxyl (-OH) groups for the three alcohols, it is found that the hydroxyl group of methanol prefers to form more hydrogen bonds than that of ethylene glycol and glycerol due to the intra-and intermolecular effects. It is also shown that concentration has significant effect on the ability of alcohol molecule to hydrogen bond water molecules. Understanding the hydrogen bonding characteristics of the aqueous solutions is helpful to reveal the cryoprotective mechanisms of methanol, ethylene glycol and glycerol in aqueous solutions.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.330-342
• /
• 2003

The formation of emulsions and micelles in water/ceramide PC104/CholE $O_{20}$/C$_{16}$E $O_{20}$ and water/ceramide PC104/CholE $O_{20}$ mixtures was investigated through the phase behavior studies. The phase diagrams showed the existence of micelle and emulsion regions in both systems. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) showed the wider micellar and emulsion regions than the single surfactant system (CholE $O_{20}$). From FT-IR measurements, it was found that the polyoxyethylene (POE) groups of surfactants formed the hydrogen bonds with amido carbonyl group in ceramide PC104. This result indicated that the hydrophilic part (EO) of surfactants could stabilize the lamellar structure and emulsion of ceramide PC104. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) resulted in the smaller emulsion droplet size due to the effect of curvature at the interface, thus further increasing emulsion stability. With the penetration of $C_{16}$E $O_{20}$into the interfacial layer of surfactants in emulsion, the curvature of the interface might be altered for the formation of smaller emulsion droplets. The mixed surfactant system could incorporate up to 4 wt. % of ceramide PC104 into emulsion more than single surfactant system.ystem.m.

• Restorative Dentistry and Endodontics
• /
• 제44권2호
• /
• pp.13.1-13.9
• /
• 2019

Objectives: This study evaluated the effect of dentin pretreatment with silver nanoparticles (SNPs) and chlorhexidine (CHX) on the microshear bond strength (${\mu}SBS$) durability of different adhesives to dentin. Materials and Methods: Occlusal surfaces of 120 human molars were ground to expose flat dentin surfaces. The specimens were randomly assigned to six groups (n = 20). Three groups (A, B, and C) were bonded with Adper Single Bond 2 (SB) and the other groups (D, E, and F) were bonded with Clearfil SE Bond (SEB). Dentin was pretreated with CHX in groups B and E, and with SNPs in groups C and F. The specimens were restored with Z250 composite. Half of the bonded surfaces in each group underwent ${\mu}SBS$ testing after 24 hours and the other half was tested after 6 months of water storage. Results: SNP application was associated with a higher ${\mu}SBS$ than was observed in the CHX and control groups for SEB after 24 hours (p < 0.05). A significantly lower ${\mu}SBS$ was observed when no dentin pretreatment was applied compared to dentin pretreatment with CHX and SNPs for SB after 24 hours (p < 0.05). The ${\mu}SBS$ values of the 6-month specimens were significantly lower than those obtained from the 24-hour specimens for all groups (p < 0.05). This decrease was much more pronounced when both adhesives were used without any dentin pretreatment (p < 0.05). Conclusions: SNPs and CHX reduced the degradation of resin-dentin bonds over a 6-month period for both adhesive systems.

• 대한화학회지
• /
• 제21권5호
• /
• pp.307-319
• /
• 1977

Thiourea derivative인 $N-({\alpha}-dimethyl\;{\beta}-hydroxy)ethyl\;N'-cyclohexyl\;thiourea,\;C_{ll}H_{22}N_2OS)$의 결정 및 분자구조를 X-선 회절법으로 해명하였다. 이 화합물의 결정은 공간군 $P_{bca}$에 속하는 orthorhombic 형으로 a = 10.33(3), b = 11.82(3), c = 22.57(4)${\AA}$ 이고 Z = 8이다. Weissenberg 사진촬영으로 얻은 회절반점의 총수는 1414개이며 중원자법을 이용하여 구조해명을 한 후 최소자승법으로 정밀화하였으며 최종 R값은 0.13이다. Cyclohexane ring은 normal chair conformation을, thiourea 부분은 평면을 이루고 있다. 일차 알코올의 hydroxyl group은 N(2)원자와 분자내 수소결합을 이뤄서 전체분자를 안정화시키고 있다. 분자들은 결정내에서 수소결합과 van der Waals힘으로 서로 결합되어 있다. 분자내 수소결합 N(2)-H${\cdot}{\cdot}{\cdot}$O는 강한 수소결합으로 N${\cdot}{\cdot}{\cdot}$O 길이는 2.71${\AA}$이고, 분자간 수소결합 O${\cdot}{\cdot}{\cdot}$H${\cdot}{\cdot}{\cdot}$S의 O${\cdot}{\cdot}{\cdot}$S 길이는 3.02${\AA}$으로 b축에 나란하다.

• 대한화학회지
• /
• 제43권5호
• /
• pp.540-546
• /
• 1999

새로운 NK-2 antagonist이며 고리상 펩티드인 cycIo-($Gln^1-Trp^2-Phe^3-{\beta}Ala^4-Leu^5-Met^6$)의 DMSO 용액 중에서의 형태를 2차원 핵자기공명과 분자동력학적인 계산에 의하여 결정하였다. 조건을 만족시키는 25개의 구조는 모든 아미노산 잔기의 골격원자들 (N,$C^{\alpha}$, C')의 자승 평균 평방근이 $0.02{\AA}$이내로 수렴하였다. 이 고리상 펩티드의 구조는 $Met^6NH$와 $Ala^4CO$, $Ala^4NH$와 $Met^6CO$, $Phe^3NH$와 $Met^6CO$의 사이에 분자내 수소결합이, Gln과 Trp에 type-I ${\beta}$-turn, 그리고 Leu에서 ${\gamma}$-turn을 취하고 있었다. 알려져 있는 고리상 펩티드인 cyclo-($Gln^1-Trp^2-Phe^3-Gly^4-Leu^5-Met^6$)의 Gly이 ${\beta}$Ala으로 바뀜에 따라 ${\beta}$Ala의 여분의 메틸렌이 고리의 골격의 반발력을 완화시키고 수소결합들이 형태의 안정에 기여하고 있다고 생각된다.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.367-373
• /
• 2004

We have developed a rigorous heat treatment method to improve the biocompatibility of chitosan as a tissue-engineered scaffold. The chitosan scaffold was prepared by the controlled freezing and lyophilizing method using dilute acetic acid and then it was heat-treated at 110$^{\circ}C$ in vacuo for 1-3 days. To explore changes in the physicochemical properties of the heat-treated scaffold, we analyzed the degree of deacetylation by colloid titration with poly(vinyl potassium sulfate) and the structural changes were analyzed by scanning electron microscopy, Fourier transform infrared (FT-IR) spectroscopy, wide-angle X-ray diffractometry (WAXD), and lysozyme susceptibility. The degree of deacetylation of chitosan scaffolds decreased significantly from 85 to 30% as the heat treatment time increased. FT-IR spectroscopic and WAXD data indicated the formation of amide bonds between the amino groups of chitosan and acetic acids carbonyl group, and of interchain hydrogen bonding between the carbonyl groups in the C-6 residues of chitosan and the N-acetyl groups. Our rigorous heat treatment method causes the scaffold to become more susceptible to lysozyme treatment. We performed further examinations of the changes in the biocompatibility of the chitosan scaffold after rigorous heat treatment by measuring the initial cell binding capacity and cell growth rate. Human dermal fibroblasts (HDFs) adhere and spread more effectively to the heat-treated chitosan than to the untreated sample. When the cell growth of the HDFs on the film or the scaffold was analyzed by an MTT assay, we found that rigorous heat treatment stimulated cell growth by 1.5∼1.95-fold relative to that of the untreated chitosan. We conclude that the rigorous dry heat treatment process increases the biocompatibility of the chitosan scaffold by decreasing the degree of deacetylation and by increasing cell attachment and growth.