• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.222-226
• /
• 1990

This paper represents the construction of laser beam writing system, laser lithography, using new method that guarantees convenience and accuracy in laser focusing. The X, Y translation stage using DC motors was controlled by the computer. Minimum line width of 1.6${\mu}{\textrm}{m}$ was obtained by the laser lithography system.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.106-115
• /
• 2021

Classifying work trades using images can serve an important role in a multitude of advanced applications in construction management and automated progress monitoring. However, images obtained from work sites may not always be clean. Defective images can damage an image classifier's accuracy which gives rise to a needs for a method to enhance a work trade image classifier's performance. We propose a method that uses work dependency information to aid image classifiers. We show that using work dependency can enhance the classifier's performance, especially when a base classifier is not so great in doing its job.

• Smart Structures and Systems
• /
• v.9 no.1
• /
• pp.1-20
• /
• 2012

In bridge engineering, maintenance strategies and thus budgetary demands are highly influenced by construction type and quality of design. Nowadays bridge owners and planners tend to include life-cycle cost analyses in their decision processes regarding the overall design trying to optimize structural reliability and durability within financial constraints. Smart permanent and short term monitoring can reduce the associated risk of new design concepts by observing the performance of structural components during prescribed time periods. The objectives of this paper are the discussion and analysis of influence line or influence field approaches in terms of (a) an efficient incorporation of monitoring information in the structural performance assessment, (b) an efficient characterization of performance indicators for the assessment of structures, (c) the ability of optimizing the positions of sensors of a monitoring system, and (d) the ability of checking the robustness of the monitoring systems applied to a structure. The proposed influence line- model correction approach has been applied to an integrative monitoring system that has been installed for the performance assessment of an existing three-span jointless bridge.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.417-425
• /
• 2012

CCTV cameras are used for surveillance and purposes of security, and can also be applied for monitoring infrastructure and equipment. In the Cut Slope Management System managed by KICT (Korea Institute of Construction Technology), cut slopes are continuously monitored using a real-time system, with CCTV cameras installed at 119 sites to detect slope activity. Here we compare CCTV images with displacement at three sites and perform a quantitative analysis. Methods for improving CCTV camera management and systems are also discussed with regard to communication, obstacles, and nighttime management.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.94-95
• /
• 2014

Construction industry has become higher, larger and more complicated. It has been analyzed that the process planning in the construction site has been made by the site engineer experience mostly and some were made based on historical data. However, such plans have been investigated that require numerous revisions during construction which means that the plans made through such methods are not reliable. Numerous studies in this field have been conducted trying to solve such problems developing methodologies to overcome such limitations. It has been analyzed that many studies have focused on suggesting prediction models only that cannot be used for both actual planning prior to construction and process monitoring during construction. Therefore, this study suggests a methodology that effectively manages construction productivity by applying simulation methodology combined with bayesian approach focusing on the high-rise curtain wall operations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05b
• /
• pp.855-858
• /
• 2003

• Smart Structures and Systems
• /
• v.33 no.1
• /
• pp.17-26
• /
• 2024

The new metro crossing the existing metro will cause the settlement or floating of the existing structures, which will have safety problems for the operation of the existing metro and the construction of the new metro. Therefore, it is necessary to monitor and predict the settlement of the existing metro caused by the construction of the new metro in real time. Considering the complexity and uncertainty of metro settlement, a Gaussian Prior Bayesian Emulator (GPBE) probability prediction model based on Bayesian optimization (BO) is proposed, that is, BO-GPBE. Firstly, the settlement monitoring data are analyzed to get the influence of the new metro on the settlement of the existing metro. Then, five different acquisition functions, that is, expected improvement (EI), expected improvement per second (EIPS), expected improvement per second plus (EIPSP), lower confidence bound (LCB), probability of improvement (PI) are selected to construct BO model, and then BO-GPBE model is established. Finally, three years settlement monitoring data were collected by structural health monitoring (SHM) system installed on Nanjing Metro Line 10 are employed to demonstrate the effectiveness of BO-GPBE for forecasting the settlement.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.823-826
• /
• 2007

In the construction project, the efforts to use IT for efficient management and improvement of productivity is gradually increasing. For instance, the cite management model with 3D CAD and RFID shows one of efforts this model define and systematize a variety of data occurred each work unit(design, material and process management information, etc). However, so far, there has been the problem monitoring the site due to the an inaccurate data and low-practice which people should input in manual. In this paper, we would like to establish the data for real time monitoring system with data inputting automatically from RTPM system and the site, and analyze the relationship between tables consist of similar data through RED Diagram.

• International Journal of Contents
• /
• v.9 no.4
• /
• pp.22-29
• /
• 2013

In this paper, we propose a integrated real-time monitoring system for recycling agriculture resourcing based on USN. We design and implement the monitoring system so that we can integrate the quality control of farmyard and liquid manures, barn environment monitoring, and positioning information control into a total management system performing recycling of excrement and manure. Selection of sensors and sensor-node construction and requirements, structure of wire/wireless communication networks, and design of monitoring program are also presented. As a result of operating our system, we can get over various drawbacks of conventional separated system and promote the proper circulation of excrement up to the farmyard. We confirm that these advanced effects arise from the effective management of the total system integrating quality control of farmyard/liquid manure, barn/farmhouse information, and vehicle moving monitoring information etc. Moreover, this monitoring system is able to exchange real-time information throughout communication networks so that we can construct a convenient information environment for agricultural community by converging IT technology with farm and stockbreeding industries. Finally we present some results of processing using our monitoring system. Sensing data and their graphs are processed in real-time, positioning information on the v-world map offers various moving paths of vehicles, and statistical analysis shows all the procedure from excrement occurrence to recycling and resourcing.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.1087-1095
• /
• 2020

The research purpose of the article is to evaluate the effects of the internal control components on the effectiveness of internal control of transport construction enterprises in Vietnam, on the basis of which we made recommendations to contribute to improving the effectiveness of internal control. Sample was collected from Vietnamese medium and large transport construction enterprises, the total number of sample questionnaires sent was 400, 330 filled-up questionnaires was collected and 250 was used for the study purpose. Quantitative research method was used for the study with the help of the SPSS software. The variables in the model are as follows: the dependent variable is the effectiveness of internal control, 5 independent variables are: control environment, risk assessment, control activities, communication, and monitoring. The results of the analysis explain 80.4% variation as a result of the effect of internal control on the Vietnamese transport construction enterprise. All five components positively affect the effectiveness of internal controls in the order of influence, which are: control activities, control environment, communication, risk assessment and monitoring. This study contributes in providing more empirical evidence about the effects of internal control components on the effectiveness of internal control of transport construction enterprises in Vietnam. The study has proposed a number of recommendations to help transport construction enterprises improve control activities and contribute towards improving the effectiveness of internal control.