• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.18-24
• /
• 2012

This paper reports the test results of a 50MHz/s 10 bits DAC developed with $0.18{\mu}m$ CMOS process for the wireless sensor network application. The 10bits DAC, not likely a typical segmented type, has been designed as a current driving type with double step thermometer decoding architecture in which 10bits are divided into 6bits of MSB and 4bits of LSB. MSB 6bits are converted into 3 bits row thermal codes and 3 bits column thermal codes to control high current cells, and LSB 4 bits are also converted into thermal codes to control the lower current cells. The high and the lower current cells use the same cell size while a bias circuit has been designed to make the amount of lower unit current become 1/16 of high unit current. All thermal codes are synchronized with output latches to prevent glitches on the output signals. The test results show that the DAC consumes 4.3mA DC current with 3.3V DC supply for 2.2Vpp output at 50MHz clock. The linearity characteristics of DAC are the maximum SFDR of 62.02dB, maximum DNL of 0.37 LSB, and maximum INL of 0.67 LSB.

• Korean Journal of Biological Psychiatry
• /
• v.10 no.1
• /
• pp.62-69
• /
• 2003

Corticotropin-releasing factor(CRF) and neuropeptide Y(NPY) are known to play important roles in mediating stress responses and stress-related behavior. To elucidate the role of neuropeptides in response to the condition that had paired with traumatic event, we observed the changes of CRF and NPY by immunohistochemistry using a conditioned footshock paradigm. Male Sprague-Dawley rats were placed in a shuttle box and exposed to 20 pairings of a tone(< 70dB, 5sec) followed by a footshock(FS, 0.8mA, 1sec) over 60min. A second group was exposed to the tone-footshock pairings, returned to the homecage for 2days, and then reexposed to the test chamber and 20tones alone for 60min, prior to sacrifice. Control groups were : a) sacrificed without exposure to FS ; b) exposed to the tone-footshock pairings and then sacrificed two days later ; or c) exposed to the chamber and tones alone, returned to the homecage for 2days and then reexposed to the chamber and 20tones over 60min prior to sacrifice. CRF was increased in animals exposed to FS or the aversive condition(context and tone) that had paired to FS in bed nucleus of the stria terminalis (BNST) compared to the control. NPY was increased by FS in amygdala and PVN, but the condition previously associated with FS results in slight increase only in amygdala area. These results suggest that the BNST appears to be the mostly involved neural circuit in response to explicit cues previously paired with footshock. Moreover, this study raise the possibility that increased CRF peptide in the BNST in response to re-exposure to the aversive condition may underlie, in part, the experience of conditioned fear-related anxiety behavior.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.38-45
• /
• 2006

The superconducting fault current limiters(SFCLs) provide the effect such as enhancement in power system reliability due to limiting the fault current within a few miliseconds. Among various SFCLs we have developed a flux-lock type SFCL and exploited a special design to effectively reduce the fault current according to properly adjustable magnetic field after the short-circuit test. This SFCL consists of two copper coils wound in parallel on the same iron core and a component using the YBCO thin film connected in series to the secondary copper coil. Meanwhile, operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. To analyze the operational characteristics, we compared closed-loop with open-loop iron core. When the applied voltage was 200[Vrms] in the additive polarity winding, the peak values of the line current the increased up to 30.71[A] in the closed-loop and 32.01[A] in the open-loop iron core, respectively. On the other hand, in the voltages generated at current limiting elements were 220.14[V] in the closed-loop and 142.73[V] in the opal-loop iron core during first-half cycle after fault instant under the same conditions. We confirmed that the open-loop iron core had lower power burden than in the closed-loop iron core. Consequently, we found that the structure of iron core enabled the flux-lock type SFCL at power system to have the flexibility.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1273-1279
• /
• 2016

Production of iodine-131 by neutron activation of tellurium in tellurium dioxide ($TeO_2$) material requires a target that meets the safety requirements. In a radiopharmaceutical production unit, a new lid for a can was designed, which permits tight sealing of the target by using tungsten inert gaswelding. The leakage rate of all prepared targets was assessed using a helium mass spectrometer. The accepted leakage rate is ${\leq}10^{-4}mbr.L/s$, according to the approved safety report related to iodine-131 production in the TRIGA Mark II research reactor (TRIGA: Training, Research, Isotopes, General Atomics). To confirm the resistance of the new design to the irradiation conditions in the TRIGA Mark II research reactor's central thimble, a study of heat effect on the sealed targets for 7 hours in an oven was conducted and the leakage rates were evaluated. The results show that the tightness of the targets is ensured up to $600^{\circ}C$ with the appearance of deformations on lids beyond $450^{\circ}C$. The study of heat transfer through the target was conducted by adopting a one-dimensional approximation, under consideration of the three transfer modes-convection, conduction, and radiation. The quantities of heat generated by gamma and neutron heating were calculated by a validated computational model for the neutronic simulation of the TRIGA Mark II research reactor using the Monte Carlo N-Particle transport code. Using the heat transfer equations according to the three modes of heat transfer, the thermal study of I-131 production by irradiation of the target in the central thimble showed that the temperatures of materials do not exceed the corresponding melting points. To validate this new design, several targets have been irradiated in the central thimble according to a preplanned irradiation program, going from4 hours of irradiation at a power level of 0.5MWup to 35 hours (7 h/d for 5 days a week) at 1.5MW. The results showthat the irradiated targets are tight because no iodine-131 was released in the atmosphere of the reactor building and in the reactor cooling water of the primary circuit.

• Annals of Clinical Neurophysiology
• /
• v.4 no.2
• /
• pp.119-124
• /
• 2002

Background : Guillain-$Barr{\acute{e}}$ syndrome(GBS) is a neurologically emergent condition, leading to respiratory insufficiency without an early and appropriate treatment. Thus, the treatment of GBS requires early diagnosis but it is difficult due to the low sensitivity of laboratory tools in the initial stage. Hoffman reflex (H-reflex) and its facilitation by Jendrassik maneuver (JM) are sensitive tools evaluating the central circuit of motor system on the spinal cord level. The aim of this study is to test whether the change of H-reflex and F-wave under the JM is able to detect the early stage of GBS and whether GBS involves the central nervous system (CNS). Material and Methods : All 7 GBS patients who showed normal or nearly normal nerve conduction study were included. The facilitation of H-reflex and changes of F-wave were calculated by measuring the percent difference of H-reflex or F-wave amplitude under JM compared to basal H-reflex of F-wave amplitude. The changes of F-wave and H-reflex in the GBS patients were compared with them of 8 healthy controls. Results : The F-wave amplitudes of both healthy controls and GBS patients did not changed under the influence of JM ($102.4{\pm}24.9%$, $108.7{\pm}29.0%$ respectively). However, the facilitation of H-wave by JM in the GBS patients was absent ($98.8{\pm}5.8%$), even though the H-reflex amplitude I the healthy controls increased under the influence of JM ($124.8{\pm}12.1%$). Conclusions : The loss of H-reflex facilitation in GBS implies that this phenomenon might be the most early change detected in the electrophysiological study and support the early diagnosis, and that GBS might include lesion in the spinal motor CNS.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.12 no.1
• /
• pp.79-110
• /
• 2001

Tourist Destination is based on tourism attractions. Components of Tourism attraction are included tourism resources, entertainment facilities, transportation, accommodation, infrastructure, assistance facilities & service, hospitality, information facilities & service, and retailing & service. Tourism resources of them is the key to determine destination development pattern, because tourism attraction that attract tourists is based on tourism resources. Therefore, there are need to study what is tourism attraction of destination at the view of tourists and what is destination development pattern based on it to develop tourism attraction that is able appeal tourists. The purpose of this study is to examine what effect of tourism attraction affects destination development pattern. This study defined Haeundae, Kwanganri, Songjung, Taejongdae in Pusan, Korea as research areas. Research data were collected from 300 respondents by a simple random sampling method. A final 284 usable questionaries were used for empirical analysis after data purification process. Reliability and validity of the scale on the tourism attraction, destination image, and facility needs have been evaluated using Cronbach $\alpha$, item-total correlations. This study analyzed the factors of the tourism attraction and destination images. The result obtained that tourism attraction is divided relaxation attraction, local activity attraction, culture . nature attraction and touring circuit attraction, and destination image is divided culture . urban attractiveness, touring attractiveness, local . stay attractiveness, convenience of travel and relativeness for destination investigated. ANOVA and regression (stepwise) were used to test hypotheses. Based on the results of hypotheses testing, major findings of the empirical research are as follow : 1. The tourism attraction and destination image are significantly different, but facility needs are not significantly by destinations (e. g. Haeundae, Kwanganri, Songjung, Taejongdae) . 2. Destination development pattern is a(fact by the tourism attraction in partial. In case of Haeundea, relaxation attraction take effect partially spa, history and marine/spa tourism. 3. The destination development pattern is influenced by the destination image in partial. In case of Kwanganri, the natural . activity attractiveness and urban tourism images have been found as influential factors that affect marine tourism. 4. The destination images are influenced the physical attributes in literature review, but the destination image are taken effect partially the tourism attraction in this study. 5. Destination development pattern are influenced by the tourism attraction and the destination image partially. This research has provided a variety of practical suggestions. Especially, it was suggested that the destination have appeal to tourists by strengthening attraction and improving weakness. Also, we need to specialize destination in same destination development pattern.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2018

A change in object distance would generally change the magnification of an optical system. In this paper, we have proposed and designed a double-Gauss optical system with a fixed magnification and image surface regardless of any change in object distance, according to moving the lens groups a little bit to the front and rear of the stop, independently parallel to the direction of the optical axis. By maintaining a constant size of image formation in spite of various object-distance changes in a projection system such as a head-up display (HUD) or head-mounted display (HMD), we can prevent the field of view from changing while focusing in an HUD or HMD. Also, to check precisely the state of the wiring that connects semiconductor chips and IC circuit boards, we can keep the magnification of the optical system constant, even when the object distance changes due to vertical movement along the optical axis of a testing device. Additionally, if we use this double-Gauss optical system as a vision system in the testing process of lots of electronic boards in a manufacturing system, since we can systematically eliminate additional image processing for visual enhancement of image quality, we can dramatically reduce the testing time for a fast test process. Also, the Gaussian bracket method was used to find the moving distance of each group, to achieve the desired specifications and fix magnification and image surface simultaneously. After the initial design, the optimization of the optical system was performed using the Synopsys optical design software.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.3-12
• /
• 2003

Physical separation containing grinding, sieving, dry magnetic separation and air classification were carried out in order to recover Ta anode from waste Ta condenser. Roll crusher wat used for the liberation of resin and metals in closed circuit system. The liberation between Ta anode and resin was easily achieved, whereat some of metals did not liberated from the Ta anode when the waste condenser was crushed below 8 mesh. When the crushed sample were divided into 8/10 mesh, 10/18 mesh and -18 mesh, metals was mainly remained in 8/10 mesh in contrast to Ta anode was in +18 mesh. It was shown that resin was more easily crushed rather than metals from the result of that resin content was 71.5％ in -18 mesh. The liberation efficiency was different with the input size of the crushed sample and average efficiency was 62.3% due to the locked Ta anode particles. The results of air classification test for the crushed samples showed that optimal air flow are 39㎥/h, 32㎥/h, 20㎥/h. respectively. When the sample were separated with optimal condition, 94.45％ Ta anode containing 97.47 wt.％ Ta anode, 0.93 wt.％ resin. 1.61 wt.％ metal was recovered with 49.39 wt.％ yield.