• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.587-595
• /
• 1998

Transient thermal analysis simulations are carried out using a modeling program to understand the human body model HBM ESD. The devices were simulated a one-dimensional device subjected to ESD stress by solving Poison's equation, the continuity equation, and heat flow equation. A ramp rise with peak ESD voltage during rise time is applied to the device under test and then discharged exponentially through the device. LDD and NMOS structures were studied to evaluate ESD performance, snap back voltages, device heating. Junction heating results in the necessity for increased electron concentration in the space charge region to carry the current by the ESD HBM circuit. The doping profile adihacent to junction determines the amount of charge density and magnitude of the electric field, potential drop, and device heating. Shallow slopes of LDD tend to collect the negative charge and higher potential drops and device heating.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.594-596
• /
• 2000

Induction Heating is utilized in a large and ever-increasing number of application. The most prominent of these are billet heating, heating treating. metal melting. In this paper, we are modeling of the inductor and calculating of the circuit parameters is described. Analyzed by finite element method and then Inductor's characteristic analysis was studied and perform the test of temperature distribution.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.1
• /
• pp.38-42
• /
• 2006

The case of a 66- year-old woman with coexisting idiopathic basal ganglia calcification(IBGC) and dementia was presented. The calcification was detected in bilateral basal ganglia, dentate nucleus, and thalamus by brain imaging. Serum calcium and phosphorus levels were normal. The underlying diseases of calcification of basal ganglia such as parathyroid dysfunction and other infectious, toxic, or metabolic illness were excluded. The patient had memory impairment and frontal executive dysfunction without aphasia, agnosia, apraxia, and visuospatial impairment in neuropsychological test. It suggested that the cognitive impairment might be due to the dysfunction of frontal-subcortical circuit.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.139-142
• /
• 2004

As fiber reinforced composite materials are widely used in aircraft, space structures and robot arms, the study on the non-destructive testing methods of the composite materials has become an important research area for improving their reliability and safety. In this paper, the AE signal analyzer with the resonance circuit to extract the specified frequency of the acoustic emission signal were designed and fabricated. The noise levels of the fabricated AE signal analyzer by the disturbance such as impact or mechanical vibration had a very small value comparable to those of the conventional AE signal analyzer. Also, the crack detection capabilities of the fabricated AE signal analyzer under the static and dynamic tensile test were evaluated and compared with the conventional AE signal analyzer.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.150-155
• /
• 2005

In recent years, as the demands of VBNS(Very high speed Backbone Network Service) and VDSL(Very high-data rate Digital Subscriber Line) increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, WDM elements increase. The alignment and the attachment technology are very important to fabricate the optical elements for communication. In this paper, the mechanism of rotational stage are studied. with the three different method and the results of them are applied to the design of the system. The performance test of resolution and travel is performed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.599-604
• /
• 2017

Nowadays reactance method is being used as a technique for fault location in parallel feeding AC traction power system. However, implementation of this method requires a large number of field tests(ground fault) which is a huge burden on the operators. This paper presents a new estimation technique using quadratic interpolation to reduce number of times for field test and improves the accuracy of fault location. To verify a new technique, we solve AT feeding circuit and model it using PSCAD/EMTDC. Finally this paper conducts a comparative analysis of usefulness between a new technique and real field data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.378-387
• /
• 2010

In this paper, we present new structure of wideband parabolic gain equalizer for TWT applied to printed circuit board. The gain equalizer is manufactured by using design variables of transmission line obtained from derived formulae. We compared the test results of two equalizers(reference equalizer and our equalizer). From that, we confirmed the validity of presented method. The presented equalizer is 1/3 times lighter, 1/2.7 times smaller and 1/10 times chipper than those of reference equalizer(Inmet company), respectively.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1301-1303
• /
• 1996

A new automatic frequency control(AFC) tracking algorithm, which we call a rotational decision directed AFC(RDDAFC) is proposed for QPSK demodulation at the digital direct broadcasting satellite(DBS). In order to prevent the presence of the residual phase difference between symbols received at k and k-l by the CPAFC[1] as well as the AFC based on $tan^{-1}$ circuit[2], the RDDAFC rotates the decision boundary for the kth received symbol by the frequency detector output of the (k-1)th received symbol before passing through the cross product discriminator. Test results show that the total pull-in time of the RDDAFC and PLL was 0.13msec under a carrier frequency offset of 2.4MHz when S/N equals 2dB.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.948-951
• /
• 2003

The design and analysis of electrical machines often require analytical models for performance assessment and system simulation. Inductances are important parameters of these models. In this paper, the methods of calculating apparent and incremental inductances are introduced for a transverse flux linear motor, which has a peculiar coil shape. The computation is accomplished by nonlinear three dimensional finite element method(FEM) and equivalent magnetic circuit network(EMCN). The improved method has been verified by a test result.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.412-419
• /
• 2020

In this study, a PID control method for sweeping automatic linearization of a wavelength swept laser is proposed. First, the closedloop transfer function embodying the PID control is derived. Through the simulation of the function, K_p = 0.022, K_i = 0.008, K_d = 0.002 were obtained as the best PID coefficients for fast linear sweeping. The performance test using the PID coefficients showed that linear sweeping was held up well with a 98.7% decrement in nonlinearity after the 10th feedback, and 45 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The equipment consists of a fiber Bragg grating array, an optical-electronic conversion circuit, and a LabVIEW FPGA program. Every 5s, automatic feedback and PID control generate a new compensated waveform and produce a better linear sweeping than before. Compared with nonlinear sweeping, linear sweeping can reduce the cumbersome and time-consuming recalibration processes and produce more accurate measurement results.