• Journal of Environmental Impact Assessment
• /
• v.6 no.2
• /
• pp.153-164
• /
• 1997

This study was conducted to develop the new Environmental Impact Assessment techniques for the grading of rareness in plant. 17 EISs which were submitted in 1996 were analyzed to know the problems in existent EIA techniques for the conservation of rare plants. Category of rare plant was reevaluated and evaluation technique for the grading of rareness in plant was developed. The results obtained from this study were as follows: 1. The evaluation technique of rareness in plant was not reflected in the current preparation provision for EIS. And t his fact also appeared in most of the EIS which were reexamined in this study. 2. The category of rare species which have been considered as the subject of protection in EIA have to be enlarged to more than legally protected species designated by MOE. 3. The taxonomic characteristics and status of species, characteristics of population, geographical characters, extent of threat and its possibility by man resulted from the habitat loss were investigated. Each item was endowed scores from 1 to 5 and all the scores were summed, and then this value was used to evaluate the order of conservation. 4. Conservation measures for the rare plants have to be applied according to the levels of rareness grade, and they are absolute conservation, in situ conservation, transplanting and ex situ conservation, post observation and none by the levels from A to E. 5. Considering the phenology of rare plants, investigation for the rare plants have to be made a1 least three times. 6. Size of the MVP(Minimum Viable Population), pollination ecology also have to be considered for the conservation of rare plants. And in the case of adopting ex situ conservation measure, the site and methods for the conservation of rare plants have to be proposed in detail.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.259-265
• /
• 1995

Antireflection coatings on optical lenses commertially available in domestic market are optically analyzed. Transmission spectra and reflection spectra are collected using spectrophotometers. The apparent absorption spectra around the absorption band edge are dominated by the substrate absorption. The reflection spectra and the apparent absorption spectra at visible region between 400nm and 700nm show very strong correlation to each other except a couple samples. The discrepency observed in the latters are due to an increased absorption in visible region by the substrate, which is negative effect of these samples. An antireflection coating consisted of $SiO_2/TiO_2/SiO_2/ZrO_2/Cr$ is made on c-Si substrate for spectroscopic ellispometry analysis. A film-by-film coating is accomplished and between each film deposition, ex-situ spectroscopic ellipsometry measurements are made. The analysis of the spectroscopic ellipsometry data reveals that the average film densities of $ZrO_2$ and $TiO_2$ reach only 80% of their respective packing densities and thick films are inhomogeneous along film growth direction. Discussions are made toward in-situ, real-time monitoring of the film growth so that a real-time feedback is possible to achieve a post-correction to minor deviations occured in the previous step. step.

• Corrosion Science and Technology
• /
• v.14 no.3
• /
• pp.113-119
• /
• 2015

Alloy 82/182 weld metals had been extensively used in joining the components of the PWR primary system. Unfortunately, there have been a number of incidents of cracking caused by PWSCC in Alloy 82/182 welds during the operation of PWR worldwide. To mitigate PWSCC, optimization of water-chemistry conditions, especially dissolved hydrogen (DH) and Zn contents, is considered as the most promising and effective remedial method. In this study, the PWSCC behaviours of Alloy 182 weld were investigated in simulated PWR environments with various DH content. Both in-situ and ex-situ oxide characterizations as well as PWSCC initiation tests were performed. The results showed that PWSCC crack initiation time was shortest in PWR water (DH: 30cc/kg). Also, high stress reduced crack initiation time. Oxide layer showed multi-layered structures consisted of the outer needle-like Ni-rich oxide layer, Fe-rich crystalline oxide, and inner Cr-rich inner oxide layers, which was not altered by the level of applied stress. To analyse the multi-layer structure of oxides, EIS measurement were fitted into an equivalent circuit model. Further analyses including TEM and EDS are underway to verify appropriateness of the equivalent circuit model.

• Journal of Hydrogen and New Energy
• /
• v.25 no.4
• /
• pp.386-392
• /
• 2014

The effective water management in a polymer electrolyte membrane fuel cell (PEMFC) is one of the key strategies for improving cell performance and durability. In this work, an ex situ measurement was carried out to understand the water droplet behavior on the surface of gas diffusion layer (GDL) as a fundamental study for establishing novel water management. For that purpose, simplified cell including one rib and two flow channels was designed and fabricated. Using this ex situ device, the water droplet emergence through the GDL of the PEMFC was emulated to understand liquid water transport through the porous diffusion medium. Through the visualization experiment, the emergence and growth of water droplets at the channel/GDL interface are mainly observed with the surface characteristics of GDL (SGL 10BA, 24BA) and rib when the liquid water passes through the GDL and is expelled to the flow channel. It is expected that the results obtained from this study can contribute to the better understanding on the water droplet behavior (emergence and removal) in the flow channels of PEMFC.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.12-15
• /
• 2012

$MgB_2$ superconductor is highly sensitive to the Mg content. Even if the samples are synthesized with the appropriate looking stoichiometric ratio, the heat treatment leads to the loss of Mg either to ambiance or to MgO. To avoid it, either excess Mg is added in the starting powder or sealed ampoule annealing is employed. In this paper the effect of open Mg sintering ambiance on the ex-situ $MgB_2$ was studied to enhance its superconducting properties. The open Mg ambiance was created to avoid any overpressure of Mg by providing a hole in Fe tube used as sample holder. The decrease in resistivity of the synthesized sample was observed through the increased temperature dependence of electron-phonon interactions. A clear enhancement in the superconducting cross-sectional area and hence the in-field critical current density is obtained.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.43-47
• /
• 2000

A study on the remediation of heavily for ion contaminated soils from abandoned iron mine was carried out, using ex-situ extraction process. Also, oxalic acid as a complex agent was evaluated as a function of concentration, reaction time and mixing ratio of washing agent in order to evaluate Fe removability of the soil contaminated from the abandoned iron mine. Oxalic acid showed a better extraction performance than 0.1N-HCl, i.e., the concentrations of Fe ion extracted from the abandoned mine for the former at uncontrolled pH and the latter were 1,750 ppm and 1,079 ppm, respectively. The optimum washing condition of oxalic acid was in the ratio of 1:5 and 1:10 between soil and acid solution during l hr reaction. The total concentrations of Fe ion by oxalic acid and EDTA at three repeated extraction, were 4,554 ppm and 864 ppm, respectively. The recovery of Fe ions from washing solution was achieved, forming hydroxide precipitation and metal sulfide under excess of calcium hydroxide and sodium sulfide. In addition, the amounted of sodium sulfide and calcium hydroxide for the optimal revovery of Fe were 15g/$\ell$ and 5g/$\ell$ from the oxalic acid complexes, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1067-1072
• /
• 2014

In this study, we report a new approach for $Mn_3O_4$-graphene nanocomposite by ex situ method. This nanocomposite shows two-dimensional aggregation of nanoparticle, and doping effect by decorated manganese oxide ($Mn_3O_4$), as well. The graphene film was made through micromechanical cleavage of graphite on the $SiO_2/Si$ wafer. Manganese oxide ($Mn_3O_4$) nanoparticle with uniform cubic shape and size (about $5.47{\pm}0.61$ nm sized) was synthesized through the thermal decomposition of manganese(II) acetate, in the presence of oleic acid and oleylamine. The nanocomposite was obtained by self-assembly of nanoparticles on graphene film, using hydrophobic interaction. After heat treatment, the decorated nanoparticles have island structure, with one-layer thickness by two-dimensional aggregations of particles, to minimize the surface potential of each particle. The doping effect of $Mn_3O_4$ nanoparticle was investigated with Raman spectra. Given the upshift in positions of G and 2D in raman peaks, we suggest that $Mn_3O_4$ nanoparticles induce p-doping of graphene film.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.198-205
• /
• 2007

The initial stages of electrochemical oxidative CuI film formation on Cu(111), as studied by means of Cyclic Voltammetry (CV), in-situ Scanning Tunneling Microscopy (STM) and ex-situ Synchrotron X-ray Photoemission Spectroscopy (SXPS), indicate a significant acceleration of copper oxidation in the presence of iodide anions in the electrolyte. A surface confined supersaturation with mobile CuI monomers first leads to the formation of a 2D-CuI film via nucleation and growth of a Cu/I-bilayer on-top of a pre-adsorbed iodide monolayer. Structurally, this 2D-CuI film is closely related to the (111) plane of crystalline CuI (zinc blende type). Interestingly, this film causes no significant passivation of the copper surface. In an advanced stage of copper dissolution a transition from the 2D- to a 3D-CuI growth mode can be observed.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.190-190
• /
• 2009

We report the epitaxial growth of MgO and CoFe/MgO on Ge (001) substrates using molecular beam epitaxy. It was found that the epitaxial growth of a MgO film on Ge could be realized at a low growth temperature of $125{\pm}5^{\circ}C$ and the MgO matches the Ge with a cell ratio of $\sqrt{2}$:1 which renders MgO rotated by $45^{\circ}$ relative to Ge. In-situ and ex-situ structural characterizations reveal the epitaxial crystal growth of bcc CoFe/MgO on Ge with the in-plane crystallographic relationship of CoFe(001)[100] || MgO(001)[110] || Ge(001)[100], exhibiting sharp interfaces in the (001) matching planes. The saturation magnetization of the sample is $1430{\pm}20$ emu/cc, which is comparable to the value of bulk CoFe.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.330-336
• /
• 2020

Ex-situ conservation of the ornamental and medicinal orchid, Coelogyne stricta, was performed by mass propagation using seed culture. Propagation stages were optimized using full- and half-strength solidified MS medium with different phytohormones. Maximum seed germination (88 ± 0.5% over 6 weeks of culture) was achieved on half-strength MS medium supplemented with 15% coconut water. Maximum shoot numbers were found on full-strength MS medium supplemented with 1 mg/L BAP, 2 mg/L Kinetin, and 10% coconut water, while the longest root was developed on full-strength MS medium with 1.5 mg/L IBA. A 2:1:1 combination of coco-peat, pine bark, and sphagnum moss was found to be a suitable potting mixture resulting in 80% seedling survivability. The cytotoxic activity of extracts of both wild plants and in vitro-developed protocorms was determined using an MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay on a cervical cancer cell line. The wild plant extract inhibited the growth of 41.99% of cells, showing that this extract has moderate cytotoxic activity toward cervical cancer cells.