• Journal of Microbiology and Biotechnology
• /
• 제8권5호
• /
• pp.478-483
• /
• 1998

For the enhanced production of a cardiac glycoside, digoxin, using in situ adsorption by biotransformation from digitoxin in plant cell suspension cultures, selection of proper resins was attempted and the culture conditions were optimized. Among various kinds of resins tested, Amberlite XAD-8 was found to be the best for digoxin production in considering adsorption characteristics as well as the effect on cell growth. Adequate time for resin addition was determined to be 36 h from the beginning of biotransformation and the presence of resins should be as short as possible to increase the productivity. In addition, to prevent the cells from direct contact with resin particles, immobilized systems were designed and examined. Immobilization further improved the advantages of in situ adsorption. It was confirmed that the increase of the contact area for mass transfer was an important factor in utilizing an immobilized system to enhance digoxin production.

• KSBB Journal
• /
• 제10권4호
• /
• pp.358-369
• /
• 1995

A mathematical model using local thermodynamic equilibrium isotherms for adsorption in encapsulated adsorbent is proposed in order to optimize the design parameters in situ bioproduct separation process. The model accurately follows the experimental data on the adsorption of berberine, secondary metabolite produced in Thaictrum rugosum plant cell culture. The adsorption rate on encapsulated adsorbent is compared with that on alginate-entrapped adsorbent. The result shows that the higher loading capacity in encapsulated adsorbent is mainly due to the increase in the maximum solid phase concentration. Based on the adsorption rate and loading capacity, the encapsulated adsorbent would be more useful than the entrapped adsorbent when used in situ bioproduct separation process. Design parameters in situ bioproduct separation process, such as the size of the capsule, membrane thickness, the ratio of capsule volume to bulk volume, the ratio of single capsule volume to total capsule volume and the adsorbent content in the capsule, are evaluated by using the model. The ratio of single capsule volume to total capsule volume is the most effective parameter for adsorption of berberine on encapsulated adsorbent.

• 공업화학
• /
• 제27권1호
• /
• pp.80-85
• /
• 2016

넓은 비표면적과 큰 기공 부피를 갖는 실리카에 다양한 아미노실란 화합물을 in-situ 중합법을 통해 기능화 후 이산화탄소 흡착 특성을 확인하였다. 이산화탄소 흡착 기능기로 아민기가 포함된 아미노실란 화합물이 사용되었다. 흡착제의 흡착 특성 분석을 위해 질소 흡 탈착 실험과 원소분석, in situ FT-IR, TGA를 이용하였다. 흡착제 합성 전후를 비교하였을 때 폴리아미노실란이 기능화되면 표면적과 기공부피 및 크기가 감소하였으며 실리카 기공 부피의 70%에 해당하는 폴리아미노실란 화합물을 기능화 시켰을 경우 기공 부피의 100% 기능화 보다 이산화탄소 흡착능이 향상되었다. 흡착 온도를 비교하며 $30^{\circ}C$보다 $75^{\circ}C$에서 폴리아미노실란 화합물의 열팽창과 자유부피 증가로 흡착능이 증가하였고, 2NS/NPS-2의 경우 기공 부피 70% 기능화와 흡착 온도 $75^{\circ}C$에서 9.2 wt%의 높은 $CO_2$ 흡착능을 보였다.

• 공업화학
• /
• 제31권3호
• /
• pp.341-345
• /
• 2020

하폐수처리 및 정수처리에 사용되는 활성탄 흡착 공정에서 기존의 활성탄 열재생법 비해 활성탄 손실과 불완전 연소로 인한 오염물질 발생도 적으며, 사용 활성탄의 인발-재생-재충진에 소요되는 시간의 절약이 가능한 재생 방법으로 오존수를 이용한 in situ regeneration에 대한 기초연구를 수행하였다. 활성탄 흡착 컬럼 상에서 페놀(phenol) 및 PEG를 흡착 파과 시킨 후 오존수 접촉으로 흡착물질을 분해 제거하는 흡착-재생 싸이클을 반복하였다. 오존수 접촉에 의한 재생 횟수가 증가할수록 페놀 흡착용량은 어느 정도 감소하지만, 일정 수준으로의 감소 후에는 구조 변화가 안정화되어 추가적인 감소가 일어나지 않았다. 흡착 용량이 감소하는 이유는 오존과의 반응에 의해 활성탄의 미세공 크기가 증가하면서 비표면적이 감소하기 때문으로 나타났다. 이러한 세공 크기의 변화와 비표면적의 변화로 인하여 재생 후 in-pore adsorption이 우세한 페놀과 같은 저분자량 물질의 흡착효율은 감소하게 되나 external adsorption 비율이 큰 PEG와 같은 고분자량 물질의 흡착효율은 크게 영향을 받지 않았다. 세공 크기 및 비표면적의 변화는 오존수와의 접촉시간이 길어질수록 심화되므로 제거하려는 물질의 크기를 고려하고 접촉시간을 조절함으로써 흡착 효율의 유지를 제어하는 것이 필요하다.

• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.245-250
• /
• 2019

Prussian blue (PB) is well known for its excellent $Cs^+$ ions adsorption capacity. Due to the high dispersibility of PB in aqueous phase, composite materials imbedding PB in supporting materials have been introduced as a solution. However, building PB particles inside porous supporting materials is still difficult, as PB particles are not fully formed and elute out to water. In this study, we suggest layer-by-layer (LBL) assembly to provide better immobilization of PB on supporting materials of poly vinyl alcohol sponge (PVA) and cellulose filter (CF). Three different PB attachment methods, ex-situ/in-situ/LBL assembly, were evaluated using PB leaching test as well as $Cs^+$ adsorption test. Changes of surface functionality and morphology during PB composite preparation protocols were monitored through Fourier transform infrared spectroscopy and scanning electron microscopy. The results indicate that LBL assembly led to better PB attachment on supporting materials, bringing less eluting PB particles in aqueous phase compared to other synthesis methodologies, such as ex-situ and in-situ synthesis. By enhancing the stability of the adsorbent, adsorption capacity of PVA-PB with LBL improved nine times and that of CF-PB improved over 20 times. Therefore, the results suggest that LBL assembly offers a better orientation for growing PB particles on porous supporting materials.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2004년도 춘계총회 및 학술발표회
• /
• pp.23-23
• /
• 2004

• 분석과학
• /
• 제8권4호
• /
• pp.723-730
• /
• 1995

Cyclic voltammetry and in situ STM were employed to examine the interfacial structures of a Pt(111) electrode in 0.1 mM KCN (pH9.5) and 0.1 mM KSCN (pH7) solutions. In situ STM atomic resolution revealed well ordered (2${\surd}$3${\times}$2${\surd}$3)$R30^{\circ}$-6CN and ($2{\times}2$)-2SCN structures within the double layer charging region. Six CN adsorbates formed a hollow hexagon, which embraced a coadsorbed $K^+$ cation. In contrast, the coadsorbed $K^+$ cations on the SCN covered Pt(111) were poorly ordered, despite adsorbed SCN formed a long range ordered ($2{\times}2$)-2SCN adlattice. In situ STM revealed the pronounced influence of potential in controlling the structures of compact layers at the proximity of a Pt electrode. Cathodic polarization facilitated the replacement of the coadsorbed cations by protons.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1765-1768
• /
• 2002

The isotherms of CO adsorption on the Cu/ZnO sample treated with with hydrogen and methanol are investigated. The heats of adsorption of CO on the Cu/ZnO treated with hydrogen at 723K for 3 h are in the range from 25.7 kJ/mol at $\theta=0.8$ to 59.8 at $\theta=0.1$, while those on the Cu/ZnO sample treated with methanol at 523 K for 3 h are in the range 30.3 kJ/mol at $\theta=0.8$ to 99.8kJ/mol at $\theta=0.1.$ The Cu/ZnO samples treated with hydrogen do. The heats of adsorption at q=0.1 increase with the methanol treatment time within 30 min and leveled off afterwards.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.929-934
• /
• 2011

The adsorption kinetic study of ruthenium complex, N3, onto nanoporous titanium dioxide ($TiO_2$) photoanodes has been carried out by measuring dye uptake in-situ. Three simplified kinetic models including a pseudo first-order equation, pseudo second-order equation and intraparticle diffusion equation were chosen to follow the adsorption process. Kinetic parameters, rate constant, equilibrium adsorption capacities and related coefficient coefficients for each kinetic model were calculated and discussed. It was shown that the adsorption kinetics of N3 dye molecules onto porous $TiO_2$ obeys pseudo second-order kinetics with chemisorption being the rate determining step. Additionally the heterogeneous surface and the pore size distribution of porous $TiO_2$ adsorbents were also discussed.