• Earthquakes and Structures
• /
• 제22권4호
• /
• pp.355-372
• /
• 2022

The study is part of an experimental program on full-scale Un-Reinforced Masonry (URM) wall panels strengthened with Textile reinforced mortars (TRM). Eight brick walls (two with and five without central opening), were tested under the diagonal tension (shear) test method in order to investigate the strengthening system effectiveness on the in-plane behaviour of the walls. All the URM panels consist of the innovative components, named "Orthoblock K300 bricks" with vertical holes and a thin layer mortar. Both of them have great capacity and easy application and can be constructed much more rapidly than the traditional bricks and mortars, increasing productivity, as well as the compressive strength of the masonry walls. Several parameters pertaining to the in-plane shear behaviour of the retrofitted panels were investigated, including shear capacity, failure modes, the number of layers of the external TRM jacket, and the existence of the central opening of the wall. For both the control and retrofitted panels, the experimental shear capacity and failure mode were compared with the predictions of existing prediction models (ACI 2013, TA 2000, Triantafillou 1998, Triantafillou 2016, CNR 2018, CNR 2013, Eurocode 6, Eurocode 8, Thomoglou et al. 2020). The experimental work allowed an evaluation of the shear performance in the case of the bidirectional textile (TRM) system applied on the URM walls. The results have shown that some analytical models present a better accuracy in predicting the shear resistance of all the strengthened masonry walls with TRM systems which can be used in design guidelines for reliable predictions.

• Structural Engineering and Mechanics
• /
• 제22권1호
• /
• pp.1-16
• /
• 2006

This paper presents a virtual boundary element-equivalent collocation method (VBEM) for the plane magnetoelectroelastic solids, which is based on the fundamental solutions of the plane magnetoelectroelastic solids and the basic idea of the virtual boundary element method for elasticity. Besides all the advantages of the conventional boundary element method (BEM) over domain discretization methods, this method avoids the computation of singular integral on the boundary by introducing the virtual boundary. In the end, several numerical examples are performed to demonstrate the performance of this method, and the results show that they agree well with the exact solutions. So the method is one of the efficient numerical methods used to analyze megnatoelectroelastic solids.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.388-394
• /
• 2014

In this paper, we propose a three-dimensional (3D) image correlator by use of computational integral imaging reconstruction based on the modified convolution property of periodic functions (CPPF) for recognition of partially occluded objects. In the proposed correlator, elemental images of the reference and target objects are picked up by a lenslet array, and subsequently are transformed to a sub-image array which contains different perspectives according to the viewing direction. The modified version of the CPPF is applied to the sub-images. This enables us to produce the plane sub-image arrays without the magnification and superimposition processes used in the conventional methods. With the modified CPPF and the sub-image arrays, we reconstruct the reference and target plane sub-image arrays according to the reconstruction plane. 3D object recognition is performed through cross-correlations between the reference and the target plane sub-image arrays. To show the feasibility of the proposed method, some preliminary experiments on the target objects are carried out and the results are presented. Experimental results reveal that the use of plane sub-image arrays enables us to improve the correlation performance, compared to the conventional method using the computational integral imaging reconstruction algorithm.

• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.90-98
• /
• 2016

When ships and offshore plants are flooded or the floating crane is equipped with a heavy object, these floating structures are excessively inclined. In this case, immersion, heel, and trim affecting the hydrostatic restoration performance are very large and are coupled each other. In this paper, in order to calculate a static equilibrium position of floating structures with excessive inclination, the nonlinear governing equations were constructed by sequential linearization. In the governing equation, the immersion, heel, and trim are fully coupled, and the equations are represented using a plane area, a primary moment, and a moment of inertia of the water plane area. Therefore, it is possible to calculate the additional factor related the water plane area for estimating stability. Position and orientation of the floating structure are obtained by iterative calculation. The calculated results are compared with the previous studies in the aspect to the performance and the accuracy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권3호
• /
• pp.88-98
• /
• 2011

조적조 구조물은 전 세계적으로 중 저층 주거시설, 상업시설, 종교용 건축물, 학교, 관공서 등의 용도로 폭넓게 사용되어 왔다. 그러나 조적벽체는 조적개체와 모르타르의 이질재료를 접착하여 쌓는 방식의 구조벽체로 지진과 같은 횡력 발생 시 접착력을 잃거나 미끄러지면서 파괴될 수 있다. 본 연구는 이러한 문제점을 해결하고자 조적식 구조물의 내진보강 기법을 제안하였으며, 진동대 실험을 통하여 내진 성능을 검증하였다. 진동대 실험 결과, 본 연구에서 제안한 내진보강 기법을 이용한 벽체는 한국 건축설계 기준이 제시하는 내진 기준인 0.14g와 미국 IBC에서 제시하는 내진 기준인 0.4g에서 모두 최종 파괴에 도달하지 않았다. 그러나, 0.14g 이상의 지진을 경험한 면외방향 실험체의 경우 급격한 강성저하가 관찰되어, 적절한 보수 보강이 필요할 것으로 예측된다.

• Journal of Animal Science and Technology
• /
• 제61권1호
• /
• pp.10-17
• /
• 2019

The present study was undertaken to investigate the effects of the plane of nutrition (PN) for growing-finishing pigs on growth performance and meat quality in summer. One hundred and two barrows and 102 gilts weighing approximately 44 kg were placed on a high-, medium-, or low-plane grower diet (HPG, MPG, or LPG) with ME and lysine concentrations ranging from 3.33 to 3.40 Mcal/kg and 0.93% to 1.15%, respectively, for 29 days in 6 replicates (pens) in total. Pigs from each grower pen were divided into two finisher pens and provided with a high-plane finisher diet (HPF) containing 3.40 Mcal ME and 9.5 g lysine/kg and a low-plane finisher diet (LPF; 3.25 Mcal ME and 8 g lysine/kg), respectively, up to approximately 110 kg, and slaughtered. Growth performance of the pigs, including average daily gain (ADG), average daily feed intake (ADFI), and gain:feed ratio, was not influenced by the grower-phase PN during any of the grower phase, a 31-d finisher phase I, and ensuing phase II. However, both the ADG and gain:feed ratio were greater (p < 0.05) for the HPF group than for the LPF group during the finisher phase I (748 vs. 653 g with SEM = 13 g and 0.333 vs. 0.299 with SEM = 0.008, respectively). The ADG, but not gain:feed ratio, was greater for the HPF group vs. LPF during the finisher phase II (673 vs. 623 g with SEM = 15 g for ADG and 0.322 vs. 0.323 with SEM = 0.005 for the gain:feed ratio). The carcass backfat thickness (BFT) was greater for the LPF group vs. HPF within the pigs which had been placed on LPG during the grower phase, but not within the pigs from the HPG or MPG group. Physicochemical characteristics of the longissimus dorsi muscle (LM) and sensory quality attributes of fresh and cooked LM were not influenced by either the grower-phase or finisher-phase PN. In conclusion, high PN is necessary for finishing pigs during the hot season to minimize the reduced rate of weight gain and also to prevent the increase of BFT that could result from low PN.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.177-189
• /
• 2015

The output of the controller is said to exceed the input limits of the plant being controlled when a control system operates in a non-linear region. This process is called the windup phenomenon. The windup phenomenon is not preferable in the control system because it leads to performance degradation, such as overshoot and system instability. Many anti-windup strategies involve switching, where the integral component differently operates between the linear and the non-linear states. The range of state for the non-overshoot performance is better illustrated by the boundary integral error plane than the proportional-integral (PI) plane in windup inspection. This study proposes a PI controller with a separate closed-loop integral controller and reference value set with respect to the input command and external torque. The PI controller is compared with existing conventional proportional integral, conditional integration, tracking back calculation, and integral state prediction schemes by using ScicosLab simulations. The controller is also experimentally verified on a direct current motor under no-load and loading conditions. The proposed controller shows a promising potential with its ability to eliminate overshoot with short settling time using the decoupling mode in both conditions.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.295-305
• /
• 2019

The bedding plane has a significant influence on the effect of blasting fragmentation and the overall performance of underground mining. This paper explores the effects of fragmentation of the bedding plane and different angles by using the numerical analysis. ANSYS/LS-DYNA code was used for the implementation of the models. The models include a dynamic compressive and tensile failure which is applied to simulate the fractures generated by the explosion. Firstly, the cracks propagation with the non-bedding plane in the coal with two boreholes detonated simultaneously is calculated and the particle velocity and maximum principal stress at different points from the borehole are also discussed. Secondly, different delay times between the two boreholes are calculated to explore its effects on the propagation of the fractures. The results indicate that the coal around the right borehole is broken more fully and the range of the cracks propagation expanded with the delay time increases. The peak particle velocity decreases first and then increases with the distance from the right borehole increasing. Thirdly, different angles between the bedding plane and the centerline of the two boreholes and the transmission coefficient of stress wave at a bedding plane are considered. The results indicated that with the angles increase, the number of the fractures decreases while the transmission coefficient increases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.572-575
• /
• 2005

A novel pneumatic artificial muscle actuator (PAM actuator), which has achieved increased popularity to provide the advantages such as high strength and high power/weight ratio, low cost, compactness, ease of maintenance, cleanliness, readily available and cheap power source, inherent safety and mobility assistance to humans performing tasks, has been regarded during the recent decades as an interesting alternative to hydraulic and electric actuators. In order to realize satisfactory control performance, a variable damper Magneto Rheological Brake (MRB), Is equipped to the Joint of the manipulator. Superb mixture of conventional PID controller and a phase plane switching control method brings us a novel controller. This proposed controller is appropriate for a kind of plants with nonlinearity, uncertainties and disturbances. The experiments were carried out in practical PAM manipulator and the effectiveness of the proposed control algorithm was demonstrated through experiments, which had proved that the stability of the manipulator can be improved greatly in a high gain control by using MRB with phase plane switching control method and without regard for the changes of external inertia loads.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.38-44
• /
• 2023

STAP(space-time adaptive processing) 알고리즘의 성능은 CUT(cell under test) 내의 간섭에 대한 공분산 행렬 추정의 정확도가 결정적 역할을 한다. STAP 데이터는 일반적으로 많은 배열 소자 및 사용된 다수의 송신 펄스에 의해 결정되는 2차원 데이터 구조를 가지고 있다. 그러므로 공분산 행렬 추정의 정확도를 높이기 위해서는 매우 많은 트레이닝 데이터가 요구된다. 본 논문에서는 수신된 적은 개수의 데이터를 공간주파수-도플러 평면으로 변환한 후 가상의 트레이닝 데이터를 생성하는 알고리즘을 제시한다. 클러터 점유 위치를 이론적으로 유도하며 이에 근거해서 가상 트레이닝 데이터 생성 절차를 제시하고 STAP 시뮬레이션을 통해서 제시된 알고리즘이 STAP 성능을 개선할 수 있음을 보인다.