• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.96-102
• /
• 2022

Hydroxyapatite (HAp) was synthesized from calcium hydroxide (Ca(OH)₂) reacting with phosphoric acid (H₃PO₄) in aqueous solution. HAp powders were synthesized from extremely high concentration of precursor solutions over 3 M of Ca(OH)₂ aqueous suspension using modified process parameters such as phosphoric acid (H₃PO₄) pouring rate, aging time and post ball milling process. Regardless of phosphoric acid pouring rate, the DCPD (dicalcium phosphate dihydrate) was formed at room temperature and when heated above 700℃, β-TCP (tricalcium phosphate) was synthesized and the amount reached its maximum at 900℃. When the synthesized powder was sintered at 1150℃, β-TCP, a high temperature impurity phase, remained. The single HAp phase without DCPD was obtained from post ball-milled precipitates followed by 3 day aging. For the ball-milled precipitates even without the aging process, the desired single HAp phase without β-TCP could be obtained by heat treatment above 500℃. The post ball milling process provided a convenient route for HAp synthesis.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.314-324
• /
• 2022

This study is aimed to design a membrane process that systematically removes contaminants including microplastics in sun-dried salt using a separation membrane. In this study, we selected the separation membrane material, pore size, and module suitable for the sun-dried salt fields, and proceeded with the experiments under the salt fields and laboratory conditions. A pilot plant was constructed and tested in our lab and in the actual saltern with the selected 200 kDa, 4 kDa ultrafiltration membranes, and 3 kDa nanofiltration membranes. Most of the impurities in the sea salt were 0.1 ㎛ in size, and more than 7 types of various microplastics were detected in the impurities. After that, as a result of checking the filtered water through the separation membrane process, no impurities were detected. As a result of comparing the existing sea salt component and the sea salt component prepared with separation membrane filtrate, impurities were effectively removed without change in the sea salt component.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.487-494
• /
• 2008

An experiment was performed for zone refined Re-filament and normal (nonzone refined) Re-filament to reduce the background effect on the measurement of low level uranium samples. From both filaments, the signals which seemed to come from a cluster of light alkali elements, $(^{39}K_6)^+$, $(^{39}K_5+^{41}K)^+$ and $PbO_2$ were identified as the isobaric effect of the uranium isotopes. The isobaric effect signal was completely disappeared by heating the filament about $2000^{\circ}C$ at < $10^{-7}$ torr of vacuum for more than 1.5 hour in zone refined Refilaments, while that from the normal Re-filaments was not disappeared completely and was still remained as 3 pg. of uranium as the impurities after the degassing treatment was performed for more than 5 hours at the same condition of zone refined filaments. A threshold condition eliminating impurities were proved to be at 5 A and 30 minutes of degassing time. The uranium content as an impurity in rhenium filament was checked with a filament degassing treatment using the U-233 spike by isotope dilution mass spectrometry. A 0.31 ng of U was detected in rhenium filament without degassing, while only 3 pg of U was detected with baking treatment at a current of 5.5 A for 1 hr. Using normal Re-filaments for the ultra trace of uranium sample analysis had something problem because uranium remains to be 3 pg on the filament even though degassed for long hours. If the 1 ng uranium were measured, 0.3% error occurred basically. It was also conformed that ionization filament current was recommended not to be increased over 5.5 A to reduce the background. Finally, the contents of uranium isotopes in uranium standard materials (KRISS standard material and NIST standard materials, U-005 and U-030) were measured and compared with certified values. The differences between them showed 0.04% for U-235, 2% for U-234 and 2% for U-236, respectively.