• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.227-230
• /
• 1990

The addition of titanium has come to produce an increase in the conductivity of ${\alpha}-Fe_2O_3$ and has been shown NTC ( negative temperature coefficient ) characteristics. Titanium enters the ${\alpha}-Fe_2O_3$ lattice substitutionally as $Ti^{4+}$,thus producing an $Fe^{2+}$ and maintaining the average charge per cation at three. Thus the $Fe^{2+}$ acts as a donor center with respect to the surrounding $Fe^{3+}$ ions. The sintering temperature, compacting pressure and sintering tire have an effect on the electrical properties. C-V and other properties have been measured on polycrystalline samples of ${\alpha}-Fe_2O_3$ containing small deviations from stoichiometry and small amounts of added Titanium. This measurment was made in the course of an investigation of the NTC mechanism in oxides whose cations have a partially filled d-level. C-V and frequency properties have been applied to the measurement of the trap barrier properties at the grain boundary. The double Schottky barrier at the grain boundary is the major cause of the NTC mechanism in NTC thermistor of ${\alpha}-Fe_2O_3$ containing N-type impurity.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.383-383
• /
• 2009

Silicon is commercially prepared by the reaction of high-purity silica with wood, charcoal, and coal, in an electric arc furnace using carbon electrodes, so called the metallurgical refining process, which produces ~98% pure Si (MG-Si). This can be further purified to solar grade silicon (SoG-Si) by various techniques. The most problematic impurity elements are B and P because of their high segregation coefficients. In this study, we explored the possibility of the using Cat-CVD for Si purification. The existing hot-wire CVD was modified to accommodate the catalyzer and the heating source. Mo boat (1.5 cm ${\times}$ 1 cm ${\times}$ 0.2 cm) was used as a heating source. Commercially available Si was purchased from Nilaco corporation (~99% pure). This powder was kept in the Mo-boat and heated to the purification temperature. In addition to the purification by cat-CVD technique, other methods such as thermal CVD, plasma enhanced CVD, vacuum annealing was also tried. It is found that the impurities are reduced to a great extent when treated with cat-CVD method.

• 한국세라믹학회지
• /
• 제36권8호
• /
• pp.813-819
• /
• 1999

Ion implantation, photo-lithography, Ar ion milling과 hot press 법을 이용한 micro-fabrication techrique을 사용하여 고순도 알루미나 단결정인 사파이어의 내부에, 조절된 Ca의 첨가량을 갖고 있는, crack과 비슷한 형태의 기공들을 형성시켰다. 이 bi-cryslal을 각각의 온도에서 열처리하여 Ca 이온이 고온에서 알루미나의 morphology와 hcaling에 미치는 영향을 관찰하였다. 열처리 온도가 올라감에 따라서 crack-like pore의 내부에 hcxagonal bridging ligaments가 생성되었는데, 열처리 온도와 Ca의 첨가량이 증가할수록 크기가 커지는 것을 관찰할 수 있었고, 생성된 hexagonal bndgmg ligaments는 열처리가 진행됨에 따라 서서히 커지면서 모서리가 둥글어지는 현상을 관찰할 수 있었다. Bicrystal 내부에 형성된 crack-like pore는 열처리가 진행되면서 edge regression. ligamcnt growth 및 flow의 3가지의 특징적인 형태로 진행되었다. 이때 edge regression은 상대적으로 저온에서부터 전체 crack-like pore에서 서서히 일어나기 시작하였으며, ligament growth는 일부 crack-like pore에서 진행되있으며, 대단히 빠른 속도로 crack healing이 진행됨을 추정할 수 있었다. Flow는 $1800^{\circ}C$ 이상의 고온에서 모든 crack-like pore에 걸쳐서 느리게 일어남을 알 수 있었다.

• 한국재료학회지
• /
• 제4권7호
• /
• pp.798-807
• /
• 1994

$BaTio_{3}$에 Ca가 첨가되면 상온 저항을 증가시키며 이는 $Ca^{2+}$가 $Ti^{4+}$를 치환하여 acceptor 불순물을 형성하기 때문이라고 생각된다. 그러나 $Ca^{2+}$는 $Ti^{4+}$보다 이온 반경이 크므로 그 자리를 치환하지 않는다는 주장도 있다. 본 실험에서는 $BaTiO_{3}$에 의한 acceptor가 존재하는지 알아보기 위하여 Ba/(Ti+Ca+Nb)=1이 되도록 Ca와 Nb를 첨가하여 산소 분압의 변화에 따른 고온 평형 전기 전도도를 측정하였다. 측정은 $1000^{\circ}C$에서 행하였으며 산소 분압은 $10^{-15}$ ~ 1 기압의 범위에서 조절하였다. 첨가된 Ca와 Nb의 농도를 변화시킨 결과, acceptor와 donor의 상호 보상 효과가 나타났다. 즉, Nb에 의한 donor를 보상하는 acceptor가 존재함을 확일하였고, 전도도 곡선의 결함 화학적인 해석에 의하여 Ca가 Ti자리를 치환함을 알았다. 이러한 acceptor의 존재는 ICTS에 의해서도 확인되었다.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.227-232
• /
• 2014

In this study, we propose the application of doping process technology for atmospheric pressure plasma. The plasma treatment means the wafer is warmed via resistance heating from current paths. These paths are induced by the surface charge density in the presence of illuminating Argon atmospheric plasmas. Furthermore, it is investigated on the high-concentration doping to a selective partial region in P type solar cell wafer. It is identified that diffusion of impurities is related to the wafer temperature. For the fixed plasma treatment time, plasma currents were set with 40, 70, 120 mA. For the processing time, IR(Infra-Red) images are analyzed via a camera dependent on the temperature of the P type wafer. Phosphorus concentrations are also analyzed through SIMS profiles from doped wafer. According to the analysis for doping process, as applied plasma currents increase, so the doping depth becomes deeper. As the junction depth is deeper, so the surface resistance is to be lowered. In addition, the surface charge density has a tendency inversely proportional to the initial phosphorus concentration. Overall, when the plasma current increases, then it becomes higher temperatures in wafer. It is shown that the diffusion of the impurity is critically dependent on the temperature of wafers.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.57-64
• /
• 2020

본 연구에서는 LCD 터치 패널 유리의 재활용을 위해 기계적 방법과 화학적 용해법을 혼용하여 OCA 및 유기 불순물을 제거하는 실험을 진행하였다. 터치 패널의 기계적 파분쇄를 위해 cut mill과 oscillation mill을 이용하였으며, OCA와 유기 불순물의 제거를 위해 물, 에탄올, 디클로로메탄을 이용하여 터치 패널 파쇄물을 세정하였다. 세정 이후 TGA를 통해 유기 불순물의 제거 효율을 평가한 결과 디클로로메탄 단일 용매를 사용한 경우 세정 효과가 가장 뛰어났으며, 세정 온도가 증가함에 따라 유기 불순물의 제거 효과가 증가함을 확인하였다. 제타 전위 측정을 통해 터치 패널 유리 파쇄물의 용매 내 분산도를 평가한 결과, 세정 효과가 가장 낮은 물의 제타 전위 절대값이 타용매에 비해 낮았으며, 유기물의 제거 효과는 화학적인 용해 특성뿐 아니라 용매 내 물리적인 분산 특성에 의해서도 영향을 받을 수 있음을 확인하였다.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.167-174
• /
• 2023

Phosphorus (P) is a macro mineral needed for bone mineralization and cell membrane structure and P is also involved in several fundamental pathways of metabolism in the body. Because of the low concentration and digestibility of P in plant ingredients that are the main components of diets for poultry and pigs, feed phosphates are usually included in diets in addition to the P contributed by plant ingredients. The most widely used feed phosphates in poultry and swine diets are dicalcium phosphate (DCP) and monocalcium phosphate (MCP), but tricalcium phosphate (TCP), monosodium phosphate (MSP), and magnesium phosphate (MgP) may be used as well. Because feed phosphates are mostly produced from rock phosphate, feed phosphates have impurities that contain minerals other than P. Concentrations of P in feed phosphates range from 14.8% (MgP) to 25.7% (MSP). The standardized total tract digestibility (STTD) of P in pigs ranges from 71% (TCP) to 95% (MSP). The STTD of Ca and the standardized ileal digestibility (SID) of P and Ca in feed phosphates fed to pigs and poultry have been determined only in a few experiments. Available data indicate that the STTD of Ca and SID of P in MCP are greater than in DCP in both poultry and pigs, but the SID of Ca is similar between DCP and MCP fed to broilers. Information on mineral concentrations and digestibility values in feed phosphates is needed in diet formulation for pigs and poultry, but if diets are formulated to contain equal concentrations of digestible P and Ca, it is unlikely that animal performance will be impacted by the source of feed phosphates used in the diet.

• 전기화학회지
• /
• 제24권4호
• /
• pp.113-119
• /
• 2021

본 연구에서는 유기환원제로 포름산과 촉매로 PtD/C를 사용하여 불순물이 없는 고품질 V^3.5+ 전해질을 생산하였고 이를 VRFB에 적용하였다. PtD/C 촉매의 잘 배향된 3D 수상 돌기 구조는 포름산 산화 반응과 바나듐 환원 반응에 높은 활성을 보여 주었다. 그 결과 PtD/C의 촉매 전환율은 2.73 mol g^-1 h^-1로 polyol방법을 제조된 Pt/C의 전환율 1.67 mol g^-1 h^-1보다 더 높았다. 또한 VRFB 충방전 실험에서 촉매 반응으로 생성된 V^3.5+ 전해질은 전해 방법으로 제조 된 표준V^3.5+전해질과 동일한 성능을 보여 줌으로서 VRFB의 전해질로 사용 가능함을 증명하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권2호
• /
• pp.7-10
• /
• 2009

Effects of $BaCO_3$ purity on the superconducting properties of top seeded melt growth (TSMG) processed $Y_{1+x}Ba_2Cu_3O_{7-y}$ (Y1+x, x=0.1 and 0.2) superconductors were investigated. $YBa_2Cu_3O_{7-y}$ (Y123) powder prepared using $BaCO_3$ with 99.75% purity and commercially available Y123 powder of 99.9% were used for the fabrication of single Y123 grain superconductors. $T_c$ values of the Y1+x samples prepared using low purity Y123 powder were slightly lower than those of the samples prepared using a high purity powder. In addition to the lower $T_c$, an anomalous peak effect in the intermediate magnetic fields was observed in Y1+x samples prepared using the low purity $BaCO_3$ powder. The slight decrease in $T_c$ and the anomalous peak effect are ascribed to the possible incorporation of a Y123 phase with impurity elements such as strontium and calcium included in the $BaCO_3$powder of 99.7%. The result suggests that the low purity $BaCO_3$ powder of a low price can be used as a raw power for the fabrication of single grain YBCO bulk superconductors.

• 분석과학
• /
• 제37권2호
• /
• pp.98-113
• /
• 2024

The current investigation entails the characterization of five degradation products (DPs) formed under different stress conditions of loteprednol using liquid chromatography-tandem mass spectrometry (LC-MS/MS). In addition, this study developed a stable high-performance liquid chromatography (HPLC) method for evaluating loteprednol along with impurities. The method conditions were meticulously fine-tuned which involved the exploration of the appropriate solvent, pH, flow of the mobile phase, columns, and wavelength. The method conditions were carefully chosen to successfully resolve the impurities of loteprednol and were employed in subsequent validation procedures. The stability profile of loteprednol was exposed to stress degradation experiments conducted under five conditions, and DPs were structurally characterized by employing LC-MS/MS. The chromatographic resolution of loteprednol and its impurities along with DPs was effectively achieved using a Phenomenex Luna 250 mm C18 column using 0.1 % phosphoric acid, methanol, and acetonitrile in 45:25:30 (v/v) pumped isocratically at 0.8 mL/min with 243 nm wavelength. The method produces an accurate fit calibration curve in 50-300 ㎍/mL for loteprednol and LOQ (0.05 ㎍/mL) - 0.30 ㎍/mL for its impurities with acceptable precision, accuracy, and recovery. The stress-induced degradation study revealed the degradation of loteprednol under basic, acidic, and photolytic conditions, resulting in the formation of seven distinct DPs. The efficacy of this method was validated through LC-MS/MS, which allowed for the verification of the chemical structures of the newly generated DPs of loteprednol. This method was appropriate for assessing the impurities of loteprednol and can also be appropriate for structural and quantitative assessment of its degradation products.