• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.209-214
• /
• 1999

Grazing preference, voluntary dry matter intake, stocking rate and digestibility of forage were investigated or sheep grazed in mature oil palm plantations in Malaysia. Dry matter intake (DMI) was estimated using the chromium sesquioxide marker method. The sheep were allowed to graze about 5 hours/day in oil palm plantations of age ranging from 9 to 21 years old. The crude protein, crude fibre and ash contents of selected herbage were 13.1 %; 24.6 %; and 8.3 %, respectively, while the gross energy (GE) and the metabolisable energy (ME) were 16.9 and 6.0 MJ/kg DM, respectively. Broad leaf plants and grasses were normally found in plantation of all ages. Legumes and oil palm seedlings formed the smallest group in the whole mixture. Fern content increased in older plantations. Legumes, oil palm seedlings, fern, broad leaves and grasses were 0.4, 1.3, 11.4, 28.0 and 59.0 %, respectively of total herbage. Grasses showed the highest preference index followed by broad leaf plants, legumes, oil palm seedlings and ferns in that order. The DMI and the metabolisable energy intake (MEI) of sheep at 6, 8, 10, 12 and 14 months of age were 64.8, 65.0, 65.3, 65.6 and 67.4 g/kg $W^{0.75}$ (p<0.05) and 0.39, 0.40, 0.40, 0.40 and 0.41 MJ/kg $W^{0.75}$, respectively. The average stocking rate was 4.3 sheep/ha. It was concluded that the performance of the sheep could be improved by increasing the daily grazing period and also by appropriate concentrate supplementation.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1904-1917
• /
• 2016

The moving average filter (MAF) is widely utilized to improve the disturbance rejection capability of phase-locked loops (PLLs). This is of vital significance for the grid-integration and stable operation of power electronic converters to electric power systems. However, the open-loop bandwidth is drastically reduced after incorporating a MAF into the PLL structure, which makes the dynamic response sluggish. To overcome this shortcoming, some new techniques have recently been proposed to improve the transient response of MAF-based PLLs. In this paper, a comprehensive performance comparison of advanced MAF-based PLL algorithms is presented. This comparison includes HPLL, MPLC-PLL, QT1-PLL, and DMAF-PLL. Various disturbances, such as grid voltage sag, voltage flicker, harmonics distortion, phase-angle and frequency jumps, DC offsets and noise, are considered to experimentally test the dynamic performances of these PLL algorithms. Finally, an improved positive sequence extraction method for a HPLL under the frequency jumps scenario is presented to compensate for the steady-state error caused by non-frequency adaptive DSC, and a satisfactory performance has been achieved.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.156-173
• /
• 2004

Business process should support the execution of collaboration process with agility and flexibility through the integration of enterprise inner or outer applications and human resources from the collaborative workflow view. Although the dependency of enterprise activities to the automated system has been increasing, human role is as important as ever. In the workflow modelling this human role is emphasized and the structure to control human error by analysing decision-making itself is needed. Also, through the collaboration of activities agile and effective communication should be constructed, eventually by the combination and coordination of activities to the aimed process the product quality should be improved. This paper classifies human errors can be occurred in collaborative workflow by applying GEMS(Generic Error Modelling System) to control them, and suggests human error control method through hybrid based modelling as well. On this base collaborative workflow modeling tool is designed and implemented. Using this modelling methodology it is possible to workflow modeling could be supported considering human characteristics has a tendency of human error to be controlled.

• Genomics & Informatics
• /
• v.7 no.2
• /
• pp.122-130
• /
• 2009

A systems biology approach for the identification of perturbed molecular functions is required to understand the complex progressive disease such as breast cancer. In this study, we analyze the microarray data with Gene Ontology terms of molecular functions to select perturbed molecular functional modules in breast cancer tissues based on the definition of Gene ontology Functional Code. The Gene Ontology is three structured vocabularies describing genes and its products in terms of their associated biological processes, cellular components and molecular functions. The Gene Ontology is hierarchically classified as a directed acyclic graph. However, it is difficult to visualize Gene Ontology as a directed tree since a Gene Ontology term may have more than one parent by providing multiple paths from the root. Therefore, we applied the definition of Gene Ontology codes by defining one or more GO code(s) to each GO term to visualize the hierarchical classification of GO terms as a network. The selected molecular functions could be considered as perturbed molecular functional modules that putatively contributes to the progression of disease. We evaluated the method by analyzing microarray dataset of breast cancer tissues; i.e., normal and invasive breast cancer tissues. Based on the integration approach, we selected several interesting perturbed molecular functions that are implicated in the progression of breast cancers. Moreover, these selected molecular functions include several known breast cancer-related genes. It is concluded from this study that the present strategy is capable of selecting perturbed molecular functions that putatively play roles in the progression of diseases and provides an improved interpretability of GO terms based on the definition of Gene Ontology codes.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.539-550
• /
• 2004

Purpose: The purpose of this study was to evaluate the achievements of the project, and also to find out its strengths and weaknesses. Method: This evaluative study employed system theory and analytic techniques by using criteria which were relevance, appropriateness, adequacy, progress, effectiveness and satisfaction for input, process, output, and outcome of program. Study subjects were participants in the home health care program implemented in G public health center in Inchon metropolitan city in 2003. Results: Input factors including recruitment personnel, and support organization development were not adequately met for the program. However. the goal and objectives of the project were really appropriate for the community needs as well as government's policy. For the Process evaluation, home health care record form and computer data base had not progressed as scheduled, but overall program activities were finished on time. However, cooperation between organizations in the health center during service activity were not supportive. Managerial ability of program charged personnel about coordination and integration of team members was not affirmative. Output and outcome evaluation showed that people improved self care ability were 221 (17.5%). and 71 (5.62%) of subjects were moved into category of possible self-care. Client's satisfaction for this project showed a high degree. Conclusions: Based on the above results support organization and staff personnel for this program should be developed. Also, a community network of resources should be established and case management services should be focused continuously in community based home health care.

• Journal of Korean Public Health Nursing
• /
• v.20 no.1
• /
• pp.5-15
• /
• 2006

Purpose: The objectives of this study was to measure the outcomes of interventions on the health and social welfare of the elderly in a rural community in Korea. The project involved integrating services of one public health center with that of one social welfare agency, which were under different administrative structures. Method: A single group pretest-posttest design was used for this research. Seventy-five elderly residents living alone in a rural community participated in the study. All of them had coverage of free basic medical care and social welfare services by the government. Major activities for the intervention included: developing partnerships among community leaders/institutes; forming committees of community residents; educating care providers and volunteers; developing 8 integrated service programs and instruments; and organizing the networks. The 20-month intervention was care-managed by a public health nurse whom collaborated with social worker, and was assisted by volunteers. The t-test was utilized to analyze the outcome variables including the elder's health, social welfare and quality of life. A major limitation of this study was the lack of a control group. Results: The outcome of the intervention was shown by improved elder's health, social welfare needs, and quality of life. Integrating the services of public health centers with those of social welfare agencies is an effective way to improve the health of the elderly in the community. Conclusion: Developing community capacity with such integrated services will pay an important role in improving the health of the elderly who live alone.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2015

Base isolation is considered as a seismic protective system in the design of next generation Nuclear Power Plants (NPPs). If seismic isolation devices are installed in nuclear power plants then the safety under a seismic load of the power plant may be improved. However, with respect to some equipment, seismic risk may increase because displacement may become greater than before the installation of a seismic isolation device. Therefore, it is estimated to be necessary to select equipment in which the seismic risk increases due to an increase in the displacement by the installation of a seismic isolation device, and to perform research on the seismic performance of each piece of equipment. In this study, modified NRC-BNL benchmark models were used for seismic analysis. The numerical models include representations of isolation devices. In order to validate the numerical piping system model and to define the failure mode, a quasi-static loading test was conducted on the piping components before the analysis procedures. The fragility analysis was performed by using the results of the inelastic seismic response analysis. Inelastic seismic response analysis was carried out by using the shell finite element model of a piping system considering internal pressure. The implicit method was used for the direct integration time history analysis. In addition, the collapse load point was used for the failure mode for the fragility analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.279-289
• /
• 2017

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.282-288
• /
• 2014

The DGPS reference station is a national infrastructure generating GPS correctional information and transmitting the signal for Differential GPS. Currently, Korea has applied and operated the software-based DGPS reference station as a standard of the next generation proposed by the USCG in order to improve the hardware-based DGPS reference system. However, software-based DGPS reference station proposed by USCG was changed in software method, only for form. There is no advantage to changing software-based because the most critical part of architecture has not been improved. In this paper, we have designed a new software-based marine DGPS station architecture that a reference station software and a monitor station were integrated. The new marine DGPS station architecture based on software is a more simplified structure than it used to be and can be utilized in the DGPS reference station.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.371-384
• /
• 2019

Motion perception has been tremendously improved in neuroscience and computer vision. The baseline motion perception model is mediated by the dorsal visual pathway involving the cortex areas the primary visual cortex (V1) and the middle temporal (V5 or MT) visual area. However, few works have been done on the extension of neural models to improve the efficacy and robustness of motion perception of real sequences. To overcome shortcomings in situations, such as varying illumination and large displacement, an adaptive V1-MT motion perception (Ad-V1MTMP) algorithm enriched to deal with real sequences is proposed and analyzed. First, the total variation semi-norm model based on Gabor functions (TV-Gabor) for structure-texture decomposition is performed to manage the illumination and color changes. And then, we study the impact of image local context, which is processed in extra-striate visual areas II (V2), on spatial motion integration by MT neurons, and propose a V1-V2 method to extract the image contrast information at a given location. Furthermore, we take feedback inputs from V2 into account during the polling stage. To use the algorithm on natural scenes, finally, multi-scale approach has been used to handle the frequency range, and adaptive pyramidal decomposition and decomposed spatio-temporal filters have been used to diminish computational cost. Theoretical analysis and experimental results suggest the new Ad-V1MTMP algorithm which mimics human primary motion pathway has universal, effective and robust performance.