• Journal of Information Display
• /
• v.12 no.1
• /
• pp.5-10
• /
• 2011

A novel architecture and proprietary electronic inks were developed to provide disruptive digital-media solutions based on an electrokinetic technology platform. The flexible reflective electronic media (eMedia) was fabricated by imprinting three-dimensional microscale structures with a roll-to-roll manufacturing platform. The HP technologies enable the required attributes for eMedia, such as low power, transparency, print-quality color, continuous levels of gray, and lowcost scalability. Pixelation was also demonstrated by integrating with the prototype oxide thin-film transistor backplane, and the system architecture was further developed by stacking primary-colorant layers for color reflective-display application. The innovations described in this paper are currently being developed further for the eSkins, eSignage, and ePaper applications.

• Preventive Nutrition and Food Science
• /
• v.15 no.4
• /
• pp.249-254
• /
• 2010

We examined the effect of extracts of meju prepared with traditional and standardized methods on pancreatic lipase and the absorption of dietary lipid. Aqueous methanolic (80%, v/v) extracts of meju dose-dependently inhibited the activities of porcine pancreatic lipase. The plasma triglyceride levels in Imprinting Control Region mice after a single oral administration of lipid emulsion containing aqueous methanolic extracts from meju made by the standardized methods were lower than that of the group given a lipid emulsion containing the extracts of meju made by traditional methods. The inhibitory activity of the meju extract on dietary lipid digestion appears to be more closely associated with aglycone forms of phenolic compounds such as free isoflavones than with glycosides, since meju samples with higher total phenolic or free isoflavone content showed the stronger inhibition against pancreatic lipase. Furthermore, the data suggest that meju made using the standardized method, which contains higher levels of total isoflavones relative to traditionally prepared meju, could effectively suppress digestion of dietary lipids and therefore have the potential to help ameliorate hyperlipidemia and obesity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.316-319
• /
• 2010

File security is typically protected by encryption methods. The development of a network environment, such as the Internet according to the sharing of information between systems become commonplace, while providing convenience to users, individuals or organizations that facilitate access to sensitive information caused by hacking the system to attack the rapidly growing is a trend. This paper is the latest generation file system caused by the hacking attacks on the Sniffing for users using file encryption and key generation, Packet Sniffing Tool IP and data through the analysis are discussed. Through this study, the importance of protecting personal information by imprinting Proactive in the hacking incident, and what users will contribute to increase the level of security awareness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.655-656
• /
• 2005

In the future, plastic based system will play a crucial role in modem life, for examples, transparent display or disposable electronics and so on. In this paper, we introduced a new method to fabricate the metal line on the plastic substrate. Metal lines were fabricated by hot embossing and CMP process on PMMA (polymethylmethacrylate) substrates. A Si mold was made by wet etching process and a PMMA wafer was cut off from I mm thick PMMA sheet. A 100 nm thick Al was deposited on PMMA wafers. The Al deposited PMMA wafer and the Si mold carefully sandwiched which was directly imprinted by hot embossing. After imprinting process, a residual Al layer was removed by CMP process. Finally, we found the entire process may be very useful to fabricate the metal line on plastic substrates.

• Molecules and Cells
• /
• v.27 no.4
• /
• pp.481-490
• /
• 2009

Diverse posttranslational modifications of histones, such as acetylation and methylation, play important roles in controlling gene expression. Histone methylation in particular is involved in a broad range of biological processes, including heterochromatin formation, X-chromosome inactivation, genomic imprinting, and transcriptional regulation. Recently, it has been demonstrated that proteins containing the Jumonji (Jmj) C domain can demethylate histones. In Arabidopsis, twenty-one genes encode JmjC domain-containing proteins, which can be clustered into five clades. To address the biological roles of the Arabidopsis genes encoding JmjC-domain proteins, we analyzed the temporal and spatial expression patterns of nine genes. RT-PCR analyses indicate all nine Arabidopsis thaliana Jmj (AtJmj) genes studied are actively expressed in various tissues. Furthermore, studies of transgenic plants harboring AtJmj::${\beta}$-glucuronidase fusion constructs reveal that these nine AtJmj genes are expressed in a developmentally and spatially regulated manner.

• Advances in materials Research
• /
• v.9 no.4
• /
• pp.251-263
• /
• 2020

α-mangostin imprinted polymers have been synthesized by a non-covalent imprinting approach with α-mangostin as a template molecule. The α-mangostin molecularly imprinted polymers (MIPs) prepared by radical polymerization using methacrylic acid, ethlylene glycol dimethacrylate, benzoyl peroxide, and acetonitrile, as a monomer, crosslinker, initiator, and porogen, respectively. The template was removed by using methanol:acetic acid 90:10 (v/v). The physical characteristics of the polymers were investigated by Fourier Transform Infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The rebinding studies were carried out by batch methods. The results exhibited that the MIPs was able to adsorb the α-mangostin at pH 2 and the contact time of 180 min. The kinetic adsorption data of α-mangostin performed the pseudo-second order model and followed the Langmuir isotherm model with the adsorption capacity of 16.19 mg·g-1. MIPs applied as a sorbent material in solid-phase extraction, namely molecularly imprinted solid-phase extraction (MISPE) and it shows the ability for enrichment and clean-up of α-mangostin from the complex matrix in medicinal herbal product and crude extract of mangosteen (Garcinia mangostana L.) pericarp. Both samples, respectively, which were spiked with α-mangostin gives recovery more than 90% after through by MISPE in all concentration ranges.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.138-142
• /
• 2008

Molecularly imprinting technology is an effective method to prepare a synthetic material with a high selectivity to a target molecule. In this study, a molecularly imprinted polymer (MIP) was synthesized via UV-polymerization using theophylline and UV-curable polyester-acrylate resin as a template molecule and a crosslinker, respectively. To elucidate the effects of functional monomer type on the performance of the MIP, each MIP was synthesized using mathacrylic acid, acrylic acid, and acryl amide as functional monomers. Each MIP showed higher rebinding capacity to theophylline than its corresponding non-imprinted polymer (NIP). The MIP synthesized using mathacrylic acid as a functional monomer showed the highest rebinding capacity to theophylline. The selectivity of the MIP was investigated using a solution with caffeine having a very similar structure to theophylline. The binding performance of the MIP to theophylline decreased when distilled water was used as a solvent, which has more polarity than chloroform.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1838-1843
• /
• 2014

Nanoimprint lithography (NIL) fabrication process is regarded as the main alternative to existing expensive photo-lithography in areas such as micro- and nano-electronics including optical components and sensors, as well as the solar cell and display device industries. Functional patterns, including anti-reflective moth-eye pattern, photonic crystal pattern, fabricated by NIL can improve the overall efficiency of such devices. To successfully imprint a nano-sized pattern, the process conditions such as temperature, pressure, and time should be appropriately selected. In this paper, a cavity-filling process of the moth-eye pattern during the thermal-NIL within the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer, were investigated with three-dimensional finite element analysis. The effects of initial thickness of polymer resist and imprinting pressure on cavity-filling process has been discussed. From the analysis results it was found that the cavity filling can be completed within 100 s, under the pressure of more than 4 MPa.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1376-1381
• /
• 2012

Optical devices are used extensively in the field of information network. Increasing demand for optical device, optical interconnection has been a important issue for commercialization. However many problems exist in the interconnection between optical device and optical fiber, and in the case of the multi-channel, problems of the optical alignment and optical array arise. For solving the alignment and array problem of optical device and the optical fiber, we fabricated fiber alignment and array by using imprint technology. Achieved higher precision of optical fiber alignment and array due to fabricating using imprint technology. The silicon stamp with different depth was fabricated using the conventional photolithography. Using the silicon stamp, a nickel stamp was fabricated by electroforming process. We conducted imprint process using the nickel stamp with different depth. The optical alignment and array by fabricating the patterns of optical device and fiber alignment and array using imprint process, and achieved higher precision of decreasing the dimensional error of the patterns by optimization of process. The fabricated optical interconnection of PLC device was measured 3.9 dB and 4.2 dB, lower than criteria specified by international standard.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.897-902
• /
• 2015

This study reports on a uniform resin coating method by using a doctor blade type dispenser. For high productivity, continuous imprint-lithography has been studied, and developed fabrication systems are used in several applications such as anti-reflection films, dry adhesives, and water collecting surfaces. In the continuous fabrication field, researchers have typically focused on patterning and demolding procedures. During the roll-to-roll fabrication process, however, the uniform resin coating process is also important in order to obtain a high quality product, which can be evaluated by uniform thickness, precise geometric expressions, and a thin residual layer. To achieve these, a doctor blade type dispenser was designed and fabricated. As a result, thickness of coated resin was well controlled by modulating the flow rate of the resin and blading gap. In addition, a very thin layer coating process (${\sim}10{\mu}m$) was achieved by softly contacting the blade on the substrate.