• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.428-432
• /
• 2014

Rotating machines are an integral part of large electrical power machinery in most of the industries. Any degradation or outages in the rotating electric machinery can result in significant losses in productivity. It is critical to monitor the equipment for any degradation's so that it can serve as an early warning for adequate maintenance activities and repair. Prior research and field studies have indicated that the rotating machines have a particular type of signal structure during the initial start-up transient. A machine performance can be studied based on the effect of degradation in signal parameters. In this paper a data-acquisition system and the FFT algorithm has been design and model using the MATLAB and Simulink. The implementation had been carried out on the TMS320 DSP Processor and various testing and verification of the machine performance had been carried out. The results show good agreement with expected results for both simulated and real-time data. The real-time data from AC water pumps which have rotating motors built-in were collected and analysed. The FFT algorithm provides frequency response and based on this frequency response performance of the machine had been measured.The FFT algorithm provides only approximation about the machine performances.

• 한국컴퓨터그래픽스학회논문지
• /
• 제6권3호
• /
• pp.35-40
• /
• 2000

There are two problems in H.26X compression technique. One is compressing time in encoding process and the other is degradation of the decoded video quality due to high compression rate. For transferring moving pictures in real-time, it is required to adopt massively high compression. In this case, there are a lot of losses of an original video data and that results in degradation of quality. Especially degradation called by blocking artifact may be produced. The blocking artifact effect is produced by DCT-based coding techniques because they operate without considering correlation between pixels in block boundaries. So it represents discontinuity between adjacent blocks. This paper describes methods of quality compensation for H.26x decoded data and enhancing encoding speed for real-time operation. Our goal of the quality compensation is not to make the decoded video identical to a original video but to make it perceived better through human eyes. We suggest an algorithm that reduces block artifact and clears decoded video in decoder. To enhance encoding speed, we adopt new four-step search algorithm. As shown in the experimental result, the quality compensation provides better video quality because of reducing blocking artifact. And then new four-step search algorithm with $MMX^{TM}$ implementation improves encoding speed from 2.5 fps to 17 fps.

• Journal of Information Technology Applications and Management
• /
• 제18권2호
• /
• pp.91-108
• /
• 2011

Enormous losses of shareholders and consumers caused by the risks threatening today's business (e.g., accounting fraud and inside trading) have ignited the necessity of international regulations on corporate ethics and internal control, such as Basel II and SOX. Responding to these regulations, companies are establishing governance system, applying it consistently to the core competency of the company, and increasing the scope of the governance system. Recently occurred security related incidents require companies to take more strict accountability over information security. One of the results includes strengthening of legislation and regulations. For these reasons, introduction of information security governance is needed. Information security governance governs the general information security activities of the company (establishment of information security management system, implementation of information security solutions) in the corporate level. Recognizing that the information security is not restricted to IT domain, but is the issue of overall business, this study develops information security governance framework based on the existing frameworks and systems of IT governance. The information security governance framework proposed in the study include concept, objective, and principle schemes which will help clearly understand the concepts of the information security governance, and execution scheme which will help implement proper organization, process and tools needed for the execution of information security governance.

• 센서학회지
• /
• 제25권4호
• /
• pp.280-284
• /
• 2016

For an arc-flash protection system, the selection of arc-flash sensor in implementation is largely dependent on the coverage area and the spatial resolution. Typically, a point sensor is used to accurately measure an arc event within a very narrow region; whereas, a loop or a line sensor can cover several electrical compartment at the same time, but with a poor resolution. In this work, a novel scheme for an arc-flash sensor was developed by making use of the transmission loss of plastic optical fibers (POFs) to cover a broad range with a high spatial resolution. By relating the amplitude ratio of the arc-signals at the ends of the POF with the arc-location, arc events could be located with a resolution of ~5 cm within a spatial range of 10 m, which has not been reported yet.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1421-1424
• /
• 2013

The electronic equipment which is exposed to high level pulsed radiation is damaged by Upset, Latchup, and Burnout. Those damages come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appear as losses of a power in military weapon system or as a blackout in aerospace equipment and eventually caused in gross loss of national power. In this paper, we have implemented a RDC(Radiation detection and control module) as a part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC, which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator, is designed to protect the an important electronic circuits from the a pulse radiation. To verify the functionality of the RDC, LM118s, which had damaged by the pulse radiation, were tested. The test results showed that the test sample applied with the RDC was worked well in spite of the irradiation of a pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with the RDC had the functionality of radiation protection for the electronic devices.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1589-1596
• /
• 2015

A novel control method of a three-phase PWM inverter with LC filter is proposed. The transfer function of LC filter is the same as that of 2nd order low pass filter(2nd LPF) which has a zero damping ratio. A simple method of implementing 2nd LPF with damping ratio is to add resistor to inductor or capacitor of LC filter. In an industrial application, it is not practical to adopt damping resistor because it results in losses being proportional to square of current flowing through resistor. Instead of using damping resistors, the proposed active damping control(ADC) utilizes all pass filter(APF) and considers inherent processing delay of digital controller. The overall transfer function of the proposed method is the same as a 2nd LPF and its damping ratio is also controllable via control variables. Detailed design and implementation of controller is also presented. Experiments are conducted with a 7.5kVA induction motor drive system controlled by PWM converter and inverter. Test waveforms are also presented to verify the proposed LC filter control algorithm.

• 한국산업정보학회논문지
• /
• 제23권3호
• /
• pp.1-11
• /
• 2018

이 논문은 OS가 제공하는 소프트웨어 타이머를 사용한 네트워킹 스택의 구현 상황에서 고도의 정확성이 요구되는 시분할 동기적 통신의 신뢰성 문제를 다룬다. IEEE 802.15.4를 목표 프로토콜로 선정해 비컨 동기화의 신뢰성 향상 이슈를 상세히 탐구한다. 먼저, IEEE 802.15.4 비컨 모드의 구현에 소프트웨어 타이머를 사용할 때, 소프트웨어 타이머에 사용되는 하위 하드웨어 타이머 인터럽트의 처리 지연 및 유실과 소프트웨어 타이머 관리 오버헤드 등이 실제로 비컨 동기화의 저해 요인으로 작용한다는 점을 실험을 통해 확인한다. 이러한 상황을 개선하기 위한 제안한 비컨 대기시간 보정기법은 비컨 동기화의 신뢰성을 향상시킨다는 점을 입증한다.

• 유통과학연구
• /
• 제14권8호
• /
• pp.93-100
• /
• 2016

Purpose - This study examines lenders' reactions to M&A, based on the strength of the lender-borrower relationship and the lender's expectations of the potential benefits or risks of the deal. Research design, data, and methodology - This research addresses the lender's influence on the implementation stage of a large-scale strategic action such as M&A to understand the motivation and dynamics of lenders' responses and empirically examines how the lender-borrower relationship influences the focal firm's merger and acquisition (M&A) transactions, using data on 501 M&A deals in Japan from 1990 to 2010. Results - The presented analysis found that lenders that have a strong lender-borrower relationship, especially those showing a high debt equity ratio, support borrowers' M&A progress and the target firm's lenders resist the deal progressing and may raise the acquisition premium if their current power relative to borrowers is weak. Conclusions - Stakeholders including lenders do not favor strategies of focal firms that threaten their future benefits, while they also tend to estimate the potential benefits and losses by comparing their current circumstances with those of other stakeholders. The empirical results of the presented analysis help explain the mechanism of lenders' reactions and offer insights into the power of a closer and stronger lender-borrower relationship.

• 전력전자학회논문지
• /
• 제8권3호
• /
• pp.211-220
• /
• 2003

본 논문은 직접 토오크 제어 (Direct Torque control, DTC)를 이용한 릴럭턴스 동기전동기 (Reluctance Synchronous Motor, RSM)의 최대 효율 제어에 관한 연구이다. 릴럭턴스 동기전동기의 등가모델 해석에 있어서 철손의 영향을 고려하여 이론적으로 분석하였으며, 최대효율제어를 위하여 토크 전류와 여자전류 사이의 최적 각을 유도하였다. 릴럭턴스 동기전동기의 경우는 자속이 전류에 비례하므로 유도전동기와는 달리 자속레벨을 제어하면서 토오크의 동특성을 유지할 수 있다는 특징을 가지고 있으며, 제시된 연구에서는 릴럭턴스 동기전동기의 이러한 특징을 적용하여 직접 토오크 제어의 장점인 빠른 토오크 응답특성을 유지하면서 최대 효율 제어가 이루어지도록 한다. d/q 릴럭턴스 비가 2.57인 1.0 Kw 릴럭턴스 동기전동기를 이용하여 실험을 통해 제안된 방법들의 정당성을 입증하였다.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.51-58
• /
• 2015

In order to decrease the size of a switch mode power supply, high switching frequency can be an efficient way to reduce the size of passive components in the converter. In this paper, a 500-kHz high-frequency LLC resonant converter is proposed with an accurate design method of magnetizing inductance, as well as the relationship between the switching frequency and the size of the passive components. Simulation and experimental results are presented to verify the proposed methods and equations, including the temperature data of each passive and active device of the converter. Using those results, dominant power losses in the prototype converter under 500-kHz high-frequency operation are investigated, compared with the results from a 100-kHz converter. In addition, operating waveforms and power conversion efficiency will be shown to obtain design considerations for the high switching frequency LLC resonant converter.