• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.28-37
• /
• 2024

심한 하악 전돌증이 있는 환자의 경우 교정치료나 악교정수술을 활용하여 치료를 시도할 수 있으나, 장기간의 교정치료 및 수술의 침습적인 거부감이 있는 환자에서 보철적으로만 개선해야 하는 상황이 존재할 수 있다. 골격성 III급 부정교합 환자는 전방유도가 없으며, 수직적인 저작 양식을 보여주기 때문에 이러한 측면을 고려하여 치료하는 것이 중요하다. 또한, 전치부의 반대교합을 개선하기 위한 방법으로 교합수직고경을 거상하는 술식을 선택하기 쉬운데, 이는 종종 불리한 결과를 야기할 수 있으므로 신중한 진단 및 치료계획의 수립이 필요하다. 본 증례에서는 하악 전돌 및 비대칭을 가진 환자에서 단계적인 치료과정을 통하여 기존의 교합수직고경을 그대로 유지하며 임플란트 및 자연치를 이용한 최종 고정성 보철 수복을 진행하였다. 이에 기능적이고 심미적으로 적절한 결과를 보여, 환자의 진단 및 치료 과정에 대해 보고하고자 한다.

• Hip & pelvis
• /
• 제36권1호
• /
• pp.12-25
• /
• 2024

Protrusio acetabuli, or abnormal protrusion of the femoral head into the acetabulum, requires performance of a total hip arthroplasty (THA) for which various reconstruction techniques and outcomes have been described. The aim of this systematic review is to provide a comprehensive analysis of the current evidence, evaluate treatment efficacy, compare surgical techniques, and identify topics for future research along with improving evidence-based decision-making, improving patient outcomes in the management of this condition. A thorough systematic review of the PubMed, Embase, Cochrane Library databases, and Scopus library was conducted, and articles describing techniques of THA for treatment of protrusion acetabuli were extracted. The initial search generated 751 results. After exclusion, 18 articles were included. Of these, eight were prospective studies and 10 were retrospective. Surgery was performed on 783 hips with a mean age of 60 years; 80% of females who mostly had inflammatory arthritis were followed up for 8.86 years (range, 2-15.4 years). Good outcomes have been achieved with THA using uncemented cups with bone graft; however, no conclusion could be drawn with regard to the femoral side. It can be concluded that the concept of restoration of the anatomical hip center of rotation is paramount for good outcome and better survival of the implant is important when using uncemented cups with a bone graft. In addition, screw augmentation for fixation is not recommended unless absolutely necessary. The most common complications were aseptic loosening and heterotopic ossification. While the former required revision, conservative management was administered for the latter.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권4호
• /
• pp.430-435
• /
• 2000

Cleft lip and palate is one of the congenital anomalies which need comprehensive and multidisciplinary treatment plan because 1) oral cavity is an important organ with masticatory function as a start of digestive tract, 2) anatomic symmetry and balance is esthetically important in midfacial area, and 3) it is also important to prevent psycho-social problems by adequate restoration of normal facial appearance. There are many different protocols in the treatment of cleft lip and palate, but our department has adopted and modified the $Z{\"{u}}rich$ protocol, as published in the Journal of Korean Cleft Lip and Palate Association in 1998. The first challenge is feeding. Type of feeding aid ranges from simple obturators to active orthopedic appliances. In our department we use passive-type plate made up of soft and hard acrylic resin which permits normal maxillary growth. We use Millard's method to restore normal appearance and function of unilateral complete cleft lip. In consideration of both maxillary growth and phonetic problems, we first close soft palate at 18 months of age and delay the hard palate palatoplasty until 4 to 5 years of age. When soft palate is closed, posterior third of the hard palate is intentionally not denuded to allow normal maxillary growth. In hard palate palatoplasty the mucoperiosteum of affected site is not mobilized to permit residual growth of the maxilla. We have treated a patient with unilateral complete cleft lip and palate by Ajou protocol, which is a kind of modified $Z{\"{u}}rich$ protocol. It is as follows: Infantile orthopedics with passive-type plate such as Hotz plate, cheiloplasty with Millard's rotation-advancement flap, and two stage palatoplasty. It is followed by orthodontic treatment and secondary osteoplasty to augment cleft alveolus, orthognathic surgery, and finally rehabilitation with conventional prosthodontic treatment or implant installation. The result was good up to now, but we are later to investigate the final result with longitudinal follow-up study according to master plan by Ajou protocol.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.621-636
• /
• 1999

When mucoperiosteal flaps are positioned and sutured to desirable position, the wound contains several interface between tissues which differ fundamentally in composition & biological reaction. Thus the C-T surface of the flap will, on one hand, oppose another vascularized surface, and on the other, the avascular dental material for example, when root resoptions, fractured root, endodontic perforation, deep root carious lesions were filled with amalgam, glass ionomer, resin etc. Recently, a number of case report described the successful treatment of a subgingival root lesion with restorative material & free gingival graft, open flap surgery, but more objective research was needed . Most of study on restorative materials were concerned for cytotoxicity not for actual healing event on that materials and its influencing factors such as biocompatibility, surface wettability, surface topography . The aim of this in vitro study was to evaluate the effect of amalgam, resin modified glass ionomer, composite resin per se, and their surface roughness on the growth of human gingival fibroblast. The cells were obtained and placed on culture flask and incubated for 3 days with the prepared test materials. Then count the attached cell number with hemocytometer,(n=12) and 2 samples were examined with SEM about attachment cell morphology . Another 4 samples were evaluated on their surface roughness with Talysurf and average surface roughness value(Ra) were obtained. Statistical difference in attached cell number, roughness value were analyzed using ANOVA. The number of attached cell was as follows, for root dentin specimen 16.7${\pm}$4.41, resin modified glass ionomer 14.0${\pm}$4.15, resin 8.13${\pm}$3.63, amalgam 0.72${\pm}$3.33(${\times}10^3$). Between root dentin and resin-modified glass ionomer, no significant difference was observed, but resin, amalgam showed a significant less cell numbers than for root dentin, resin modified glass ionomer cement. SEM examination expressed many cell surface attachment apparatus in root dentin and resin modified glass ionomer specimens. For resin specimen, cell attachment was observed but exposed less appratus. The average surface roughness value are following results. Dentin specimen 0.6972${\pm}$ 0.104, resin modified glass ionomer 0.0822${\pm}$0.009, resin 0.0875${\pm}$0.005, amalgam 4.2145${\pm}$0.985(${\mu}m$). Between root dentin, resin-modified glass ionomer, and resin, no significant difference was observed, but amalgam showed a significant more rough surface than other groups. When evlauated the interrelationship between cell attachment and surface roughness, therefore, there was weak reverse correlation.(pearson correlation : - 0.593) These results suggest that resin modified glass ionomer have the favorable healing potential when used for subgingival restoration. And for relationship between cell attachment and surface characteristics, further investigations were needed.

• 대한두개안면성형외과학회지
• /
• 제17권3호
• /
• pp.135-139
• /
• 2016

Background: The ultimate goal of craniofacial reconstructive surgery is to achieve the most complete restoration of facial functions. A bioabsorbable fixation system which does not need secondary operation for implant removal has been developed in the last decade. The purpose of this study is to share the experience of authors and to demonstrate the efficacy of bioabsorbable mesh in a variety of craniofacial trauma operations. Methods: Between October 2008 and February 2015, bioabsorbable meshes were used to reconstruct various types of craniofacial bone fractures in 611 patients. Any displaced bone fragments were detached from the fracture site and fixed to the mesh. The resulting bone-mesh complex was designed and molded into an appropriate shape by the immersion in warm saline. The mesh was molded once again under simultaneous warm saline irrigation and suction. Results: In all patients, contour deformities were restored completely, and bone segments were fixed properly. The authors found that the bioabsorbable mesh provided rigid fixation without any evidence of integrity loss on postoperative computed tomography scans. Conclusion: Because bioabsorbable meshes are more flexible than bioabsorbable plates, they can be molded and could easily reconstruct the facial bone in three dimensions. Additionally, it is easy to attach bone fragments to the mesh. Bioabsorbable mesh and screws is effective and can be easily applied for fixation in various craniofacial trauma reconstructive scenarios.

• 대한소아치과학회지
• /
• 제40권4호
• /
• pp.335-341
• /
• 2013

매복된 상악 견치는 제 3대구치 다음으로 호발하는 매복치아로 정확한 원인은 알려져 있지 않으나 매복된 상악 견치로 인한 다양한 합병증이 나타날 수 있다. 이소맹출하는 상악 견치는 초기의 진단을 통하여 유견치의 조기 발거와 같은 차단 교정을 시행하는 경우 가장 좋은 예후를 보일 수 있으나 초기치료를 시행하지 못한 경우에는 수술적 노출과 교정적 치료를 고려할 수 있다. 또한 이소맹출하는 치아가 말기에 발견되어서 인접치아의 심한 흡수를 보인다면, 견치가 손상된 인접 치아를 대체할 수 있다. 본 증례들은 이소맹출과 치근흡수의 조기 진단을 통하여 치료되지 못한 증례로 이소맹출하는 견치를 사용하여 상악 절치의 대체사용이 대안으로 선택되었고, 현재까지 성공적인 결과를 보인다. 복합레진으로 수복된 견치는 지속적인 관찰을 통하여서 수복물을 평가할 예정이며, 추후 교정치료와 임플란트의 식립이 계획되어있다. 본 증례는 초기 처치가 이루어지지 않은 경우에 견치를 절치로 대체 사용하여 치근 흡수된 치아의 불확실한 예후를 피하고, 시간과 비용을 절감하여 심미적 만족을 얻을 수 있는 방법에 대하여 보고하고자 한다.

• 구강회복응용과학지
• /
• 제31권3호
• /
• pp.253-261
• /
• 2015

만성 치주염 환자 치료시 잔존치 발치 여부를 결정할 때 신중을 기해야 한다. 고정성 또는 가철성 국소의치 치료시 치주조건이 불량한 치아를 지대치로 사용하면 과부하로 조기실패가 우려되어 발치를 고려하지만, 임플란트 고정성 보철물의 경우 잔존치로 전달되는 기능하중을 감소시킬 수 있기 때문에 잔존치를 유지시키는 경우가 많다. 잔존치를 이용한 전악수복시 proprioceptive response를 보존할 수 있어 악간관계와 교합평면 결정시 도움이 될 뿐 아니라 환자의 보철물에 대한 적응이 쉽다. 본 증례의 환자는 치주질환에 의해 다수치 상실 및 대합치의 정출을 보였다. 동요도가 심해 예후가 좋지 않은 치아를 발거하고 소수 잔존치와 임플란트로 전악수복하여 적절한 기능적, 심미적 결과를 얻었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.515-529
• /
• 2006

Periodontal regeneration refers to the restoration of bone, cementum and periodontal ligament to their original levels before damage from periodontal disease process. Various surgical techniques to the promotion of periodontal regeneration have been used. Bone graft and guided tissue regeneration have used for the regeneration of furcation involvements which caused by periodontal disease. Fibrin adhesive is agents that have been shown to be effective in periodontal regeneration and biological carrier. Calcium sulfate which is one of the resorbable barrier materials has used for guided tissue regeneration. The purpose of this study was to compare the clinical effects between bone graft using fibrin adhesive and calcium sulfate barrier in the mandibular class II furcation involvement. For the study, twenty-six class II furcation involved teeth were surgically treated. 13 furcation defects(test group) were treated with bonegraft and fibrin adhesive and the others(control group) were treated with bone graft and calcium sulfate barrier. Pocket depth, clinical attachment level and gingival recession were measured at baseline, postoperative 3 and 6 months. The results of the study are as follows: 1. The change of pocket depth and clinical attachment level in both groups was decreased significantly at 3, 6 months than at baseline(p<0.05). 2. The change of gingival recession in both groups was increased significantly at 3, 6 months than at baseline(p<0.05). 3. The change of pocket depth and clinical attachment level in both groups was decreased at 3, 6 months, and the change of gingival recession in both groups was increased at 3, 6 months but there were no statistically or clinically significant differences with both groups. 4. The significant reduction of the pocket depth and clinical attachment level exhibited marked changes at 3 months in both groups. In conclusion, the results of this study suggest that there are no statistically or clinically significant differences between fibrin adhesive and calcium sulfate barrier in the treatment of class II furcations using xenograft.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.