• 제목/요약/키워드: implant prosthesis

검색결과 640건 처리시간 0.024초

장골 이식을 동반한 임플란트 수술 후의 합병증; 증례보고 (COMPLICATIONS AFTER DENTAL IMPLANT SURGERY WITH ILIAC BONE GRAFT ; CASE REPORT)

  • 최영준;최원철
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제29권4호
    • /
    • pp.353-360
    • /
    • 2007
  • In a one-stage approach, where the implant installation is performed simultaneously with the iliac bone graft, various complications are observed. The observed complications are as follows; severe bone resorption at the maxillary anterior region and the area adjacent to the nasal cavity, shortage of soft tissue to cover the augmented alveolar bone, difficulties with oral hygiene care caused by the diminished vestibular space and non-esthetic prosthesis. These are good reasons for choosing the two-stage approach over the one-stage approach in spite of all the advantages it has, and should be taken into careful consideration when diagnosing and planning treatment using the one-stage approach.

이식형 전자의료기 연구동향과 기술개발의 과제 (Research Trends and Challenges in Technology Development of Medical Electronic Implant Devices)

  • 조진호
    • 대한의용생체공학회:의공학회지
    • /
    • 제29권6호
    • /
    • pp.415-430
    • /
    • 2008
  • The technologies in medical electronic implant(MEI) devices are developing rapidly, and already, there are various kinds of the MEI devices in the current medical equipments market. Recently, the global market scale of MEI devices have been increased about 13% year by year, and the import amount of MEI devices in Korea is increasing rapidly. In the near future, the demands of MEI devices will be magnificently increasing by the continuous development of the biomedical electronics devices which coupled with neural, brain and other organs will bring us to tremendous effects, such as providing new therapeutic solutions to patients, extension and saving human life, and an important clue of medical development. However, the investment of the research and the activity of developments in this field are still very weak in the Korea. Consequently, this paper introduces about the research trends of MEI devices, and technological problems those must be solved, and then concludes with the suggestions in order to be the leading country in this field.

Implant-supported fixed restoration of post-traumatic mandibular defect accompanied with skin grafting: A clinical report

  • Noh, Kwantae;Choi, Woo-Jin;Pae, Ahran
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권1호
    • /
    • pp.67-72
    • /
    • 2013
  • Traumatic defects are mostly accompanied by hard and soft tissue loss. This report describes the surgical and prosthetic treatment of a patient with post-traumatic mandibular defect. A split-thickness skin graft was performed prior to implant placement and prefabricated acrylic stent was placed to hold the graft in place. The esthetic and functional demands of the patient were fulfilled by implant-supported screw-retained fixed prosthesis using CAD-CAM technology.

임플란트 보철물의 식편압입: 교합적 원인분석과 대처 (Food impaction related with trauma from occlusion)

  • 조리라
    • 대한치과의사협회지
    • /
    • 제52권8호
    • /
    • pp.491-505
    • /
    • 2014
  • Food impaction between the implant prostheses and adjacent teeth is the most frequently observed problem. It may be caused by the migration of the adjacent teeth. This symptom may be observed at the mesial aspect of implant prostheses especially, and related with the multiple contributing factors including teeth vitality and antagonist. Idal proximal contact with optimal strength and shape should be made for preventing the food impaction. Shape of customized abutment and prosthesis should have optimal emergence profile. Long duration from the extraction to the delivery of implant prostheses, the adjacent teeth and antagonist teeth may have possibility of occlusal interferences. Remained teeth mobility can induce the food impaction regardless of interproximal contact strength. Occlusal adjustment to remove occlusal interferences can be a method for enhancing the stability of interproximal contact.

임플란트 식립 후 불편감에 영향을 주는 요인 (The Factors Influencing to the Implant Patients Discomfort)

  • 윤현서;허수희;전진호
    • 치위생과학회지
    • /
    • 제11권4호
    • /
    • pp.325-332
    • /
    • 2011
  • 본 연구는 최근 보철 영역에서 보편화되고 있는 임플란트 장착환자의 구강위생관리에 대한 인식과 불편, 불만감을 파악하고 임플란트 환자의 불편감을 줄이고 효율적인 구강위생관리를 위하여 부산, 울산, 대구지역의 20개소 임플란트 전문치과에서 임플란트 보철을 받은 환자 300명을 대상으로 3개월간 자기기입식 설문조사를 실시하여 분석한 결과는 다음과 같다. 1. 임플란트 보철 후 주요 관리로는 정기검진을 72.5%, 칫솔질방법이 17.3%이 많았으며, 남자에서 정기검진에 대한 인식이 더 높았다(p=0.027). 2. 하루 칫솔질 회수는 3회 56.7%, 2회 27.1%, 4회 12.3% 등의 순이었고 성별로 차이를 보였으며(p=0.005), 칫솔질 시기는 아침식사 후 79.6%, 저녁식사 후 71.7%, 점심식사 후 68.7%의 순으로 식후 칫솔질은 비교적 잘 이루어졌으나 취침 전 34.5%, 간식 후 3.9%는 칫솔질률이 낮았다. 아침식사 전은 남자가(p=0.062), 아침식사 후(p=0.041)와 저녁식사 후(p=0.036)는 여자가 각각 더 많이 하였다 3. 임플란트 보철 후의 불편 불만감은 음식물 끼임이 63.5%이 절대적으로 많았으며, 그 외에는 염증 출혈 3.6%, 이물감 2.8%, 저작능력 2.5% 등, 불편 불만감은 대체로 적었다. 4. 성, 연령, 동반질병 수 등을 보정하였을 때 불편 불만감은 보철수가 많을수록 증가하였고, 하루 칫솔질 횟수가 많을수록, 정기검진 빈도가 잦을수록, 보철 후 경과기간이 길수록 감소하였다. 5. 정기검진 빈도는 칫솔질 교육을 받은 경우, 보철수가 많은 경우, 불편 불만감이 높을수록 증가하였고, 보철 후 경과기간이 길수록 감소하였다. 이상의 결과를 통하여 임플란트 환자의 경우 불편감은 대부분이 음식물이 끼이는 것에 대한 내용을 미루어 생각해 볼 때 환자의 불편감을 줄이고 저작효율성을 높이기 위해서는 계속적인 구강관리교육과 더불어 체계적인 임플란트 환자 관리시스템을 갖추어 나가는 것이 필요하다.

임플란트 고정체의 platform의 크기에 따른 유한요소법적 응력분석 (FINITE ELEMENT STRESS ANALYSIS OF IMPLANT PROSTHESIS ACCORDING TO PLATFORM WIDTH OF FIXTURE)

  • 정경민;정재헌;정승미
    • 대한치과보철학회지
    • /
    • 제41권5호
    • /
    • pp.674-688
    • /
    • 2003
  • Statement of Problem : With increasing demand of the implant-supported prosthesis, it is advantageous to use the different platform width of the fixture according to bone quantity and quality of the patients. Purpose : The purpose of this study was to assess the loading distributing characteristics of two implant designs according to each platform width of fixture, under vertical and inclined loading using finite element analysis. Material and method : The two kinds of finite element models were designed according to each platform width of future (4.1mm restorative component x 11.5mm length, 5.0mm wide-diameter restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction, 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction and 200N at the buccal cusp in a 300 transverse direction individually Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. Results : The stresses were concentrated mainly at the cortex in both vertical and oblique load ing but the stresses in the cancellous bone were low in both vertical and oblique loading. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading. Increasing the platform width of the implant fixture decreased the stress in the supporting bone, future and abutment screw. Increased the platform width of fixture decreased the stress in the crown and platform. Conclusion : Conclusively, this investigation provides evidence that the platform width of the implant fixture directly affects periimplant stress. By increasing the platform width of the implant fixture, it showed tendency to decreased the supporting bone, future and screw. But, further clinical studies are necessary to determine the ideal protocol for the successful placement of wide platform implants.

상악 소수치 잔존 환자에서 임플란트를 이용한 가철성 부분틀니 수복 증례 (Rehabilitation of maxillary partial edentulous patients using implant assisted removable partial denture)

  • 이보라;김지환
    • 대한치과보철학회지
    • /
    • 제52권2호
    • /
    • pp.128-135
    • /
    • 2014
  • 부분 무치악 환자는 고정성 보철, 가철성 국소의치, 임플란트 지지 고정성 보철로 수복될 수 있다. 그러나 소수 잔존치아만 남은 경우, 고정성 보철로는 수복이 어려우며, 국소의치 혹은 임플란트 지지 고정성 보철을 고려하게 된다. 이 경우 임플란트 지지 고정성 보철은 고정성 수복이라는 장점이 있으나, 충분한 개수의 임플란트가 식립되어야 하며, 환자의 전신적, 국소적 여건이 합당해야 하고, 경제적 부담도 크다. 가철성 국소의치는 지대치에 의한 대칭적인 지지가 중요하며, 특히 중심선에 대해 편측으로 소수 치아만 남은 경우에는 지점선에 대해 지대치에 유해한 스트레스를 가하면서 지대치의 예후가 불량해진다. 이 경우, 전략적 위치에 임플란트를 식립함으로써 임플란트를 의치의 유지 및 지지 요소로 활용하는 가철성보철물을 설계한다면 비용 대비 기능적이며 심미적인 보철 수복이 가능해진다. 본 두 증례는 상악 Kennedy Class I 부분 무치악 환자 중 편측으로 소수 잔존치가 전치에 국한하여 존재하는 경우로, 잔존치를 지대치로 사용하면서, 전략적 위치에 임플란트를 식립함으로써 의치의 지지가 향상된 국소의치를 제작한 증례이다.

성공적인 전치부 심미 임플란트를 위한 3가지 요소 (Three key factors for successful esthetic anterior implant restoration)

  • 임필
    • 대한심미치과학회지
    • /
    • 제25권1호
    • /
    • pp.35-49
    • /
    • 2016
  • 최근 심미성에 대한 요구가 점점 증가함에 따라, 이제는 임플란트 수복에 있어서도 기능적인 면 뿐만 아니라 심미적인 면이 더욱 강조되고 있다. 상악 전치부 임플란트 수복은 임상가들에게 항상 도전적인 과제로 다가오는데 그 이유는 다음의 세 가지 요소를 모두 필요로 하기 때문이다. 첫째, 충분한 경조직이 필요하고 둘째, 충분한 연조직이 필요하며 그리고 셋째, 심미적인 수복물이 필요하다. 연조직의 심미성은 그 하부에 있는 경조직에 의존하게 되는데 그 이유는 하부의 경조직의 골격적인 지지가 있어야만 그것을 바탕으로 그 위에 건강하고 심미적인 연조직이 안정적으로 유지될 수 있기 때문이다. 그러므로, 경조직 재건은 심미적인 임플란트 수복에 있어서 첫번째 단계이며, 특히 3차원적으로 적절한 임플란트의 식립 위치 설정은 심미성 있는 최종 수복물을 얻기 위해서 가장 중요한 단계라고 할 수 있다. 그 다음으로 두번째 단계가 순측으로 충분한 두께의 연조직을 얻기 위한 수술 기법이며, 마지막 세번쨰 단계가 적절한 출현외곽을 갖는 임시 수복물을 통해서 얻어진 심미적인 최종 수복물이다. 본 임상 증례 보고는 순측의 골 열개 결손에서의 골 증대술 과정과 전치부 영역에 주로 사용되는 VIP-CT 라고 일컫는 유경 판막술을 이용한 연조직 증대술, 그리고 임시 수복물을 통한 연조직 형태 만들기와 맞춤형 인상 코핑을 이용한 인상채득법 등을 소개함으로써 경조직, 연조직, 수복물의 세 가지 요소가 심미적인 최종 수복물을 위해 서로 어떻게 조화를 이루어내는지 알아보고자 한다.

O-ring Attachment를 이용한 무치악환자의 보철수복증례 (Prosthetic rehabilitation of the edentulous patients using O-ring attachment:A clinical report)

  • 안재진;조병완;안상헌;김종필
    • 대한치과보철학회지
    • /
    • 제36권4호
    • /
    • pp.581-586
    • /
    • 1998
  • 무치악환자의 Implant보철수복 방법은 식립된 Implan의 수에 따라 다양하다. 많은 수의 Implant가 식립된 경우에는 고정성 보철물로 수복이 가능하지만 시술이나 기공상의 복잡성, 고가의 치료비, 보철물과 잔존치조제사이의 빈 공간으로 인한 비심미성, 발음의 어려움과 같은 여러 가지 문제점이 존재한다. 적은 수의 Implant가 식립된 경우는 Bar Retained Overdenture를 사용하지만 역시 기공과정이 복잡하며, Bar와 잔존치조제사이의 공간으로 인한 점막지지 면적의 감소와 보수가 어려운 단점이 있다. 여기에 비해서 O-ring Attachment를 이용하면 기공과정이 쉽고, 잔존치조제와 보철물 사이에 공간이 없으므로 점막지지 면적을 많이 얻을 수 있다. 또한 Implant식립의 수도 최소화할 수 있어 경제적이며, 문제가 발생한 경우에 쉽게 대처할 수 있는 장점을 지니고 있다. 본 증례들은 Steri-Oss Implant System의 O-ring Attachment를 이용하여 무치악환자를 보철 수복한 예로서 술후 기능적, 심미적으로 만족할 만한 결과를 얻었기에 문헌고찰과 더불어 발표하는 바이다.

  • PDF

Prognosis after treatment with multiple dental implants under general anesthesia and sedation in a cerebral palsy patient with mental retardation: A case report

  • Hong, Young-Joon;Dan, Jung-Bae;Kim, Myung-Jin;Kim, Hyun Jeong;Seo, Kwang-Suk
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제17권2호
    • /
    • pp.149-155
    • /
    • 2017
  • Cerebral palsy is a non-progressive disorder resulting from central nervous system damage caused by multiple factors. Almost all cerebral palsy patients have a movement disorder that makes dental treatment difficult. Oral hygiene management is difficult and the risks for periodontitis, dental caries and loss of multiple teeth are high. Placement of dental implants for multiple missing teeth in cerebral palsy patients needs multiple rounds of general anesthesia, and the prognosis is poor despite the expense. Therefore, making the decision to perform multiple dental implant treatments on cerebral palsy patients is difficult. A 33-year-old female patient with cerebral palsy and mental retardation was scheduled for multiple implant treatments. She underwent computed tomography (CT) under sedation and the operation of nine dental implants under general anesthesia. Implant-supported fixed prosthesis treatment was completed. During follow-up, she had the anterior incisors extracted and underwent the surgery of 3 additional dental implants, completing the prosthetic treatment. Although oral parafunctions existed due to cerebral palsy, no implant failure was observed 9 years after the first implant surgery.