• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.476-482
• /
• 2012

In this paper, we analyze and compare several co-channel interference mitigation algorithms for WBAN application in 2.4 GHz ISM frequency bands. ML (Maximum Likelihood), OC (Optimal Combining) and MMSE (Minimum Mean Square Error) has been considered for the possible techniques for interference cancellation in view of the trade off between the performance and the complexity of implementation. Based on the channel model of IEEE 802.15.6 standard, simulation results show that ML and OC attains the lower BER performance than that of MMSE if we assume the perfect channel estimation. But, ML and OC have the additional requirement of implementation for his own and other users's channel estimation process, hence, besides the BER performance, the complexity of implementation and the sensitivity to channel estimation error should be considered since it requires the simple and small sized equipment for WBAN system application. In addition, the gap of detection BER performance between ML, OC and MMSE is much decreased under the imperfect channel estimation if we adopt real channel estimation process, therefore, in order to apply to WBAN system, the trade off between the BER performance and complexity of implemetation should be seriously considered to decide the best co-channel interference cancellation for WBAN system application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.187-193
• /
• 2017

Government has established and operated GIS Data Base in such fields as land-use, road, and underground facilities since 1995. Based on these circumstances, the importance of spatial information industry began to emerge and accordingly MLIT (Ministry of Land, Infrastructure and Transport) established "National Spatial Information Policy Master Plan" and "National Spatial Information Policy Action Plan". However, compared to other fields of transportation, the spatial information data base for railway facilities are not established and provided systematically. As shown in 'Korea National Spatial Data Infrastructure System', only 'transportation information' as an related information and 'transportation' field as an administrative information are included in the system. Detailed information for railway and its facilities are not included in the system. The reason why detailed information for railway facilities are not included in the system is that regulations for establishing and utilizing the spatial information of railway and its facilities are imperfect. In this study, trend of establishing spatial information and regulations related to railway and its facilities are reviewed. Through this review, improvement items such as complementing existent laws and establishing organization for managing spatial information data of railway are deduced and suggested. Based on this research 'Korea National Spatial Data Infrastructure System' could set a legal fundament and both integrated maintenance and operation of railway facilities could be possible.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.282-289
• /
• 2009

The pressure-sensitive adhesive(PSA) tapes are widely used as floor-sealing material in Korean constructive industry. However, the general PSA tapes can not seal the apertures completely. This is one of main reasons to cause imperfect finishing. In order to solve the problems, the asphalts were modified by FKM powder and SBS in this study. The physical properties of modified asphalts were examined by measuring the softening point, viscosity, tensile strength and adhesion strength of FKM and SBS modified asphalt. The softening point of SBS modified asphalt was increased greatly due to the formation of network structure in asphalt. Also, the change of adhesion strength of SBS modified asphalt with temperature was not so great comparing to those of pure asphalt and FKM modified asphalt. The best results of pressure-sensitive adhesion could be obtained by the SBS(linear) modified asphalt containing 6 wt.% of linear type SBS.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.127-139
• /
• 2010

The concept of Web 2.0, which means that internet users are producers and also consumers is evolved according to the development of web service technology. In the Web 2.0 space, the enormous amount of web contents are produced using many social web services. Proactive display system supports various types of users's web contents. Unfortunately, private web contents sharing facility is imperfect to date. In this paper, we develop a proactive display application which identifies people, displaying their social contents such as blogs and open cafes through wide display devices or multi-media players in physical spaces. For this, we develop a social contents presentation server where users can register their profiles and information on the social contents to be shared through the developed application. Also, we develop a social contents presentation client that proactively identifies the user in close proximity and displays the user's social contents through an intuitive user interface in physical spaces. In addition, we develop an on-the-spot feedback service which supports posting various types of replies and an on-the-spot scrap service which specifies direct sharing of the contents through the intuitive user interface.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.23-31
• /
• 2015

In this paper, we design a SSD(simultaneous single band duplex) system using RF cancellation and digital cancellation. And then, we analyze performance of the SSD system using pre-distorter with HPA non-linearity. Also, we analyze digital cancellation performance of the SSD system using pre-distorter with HPA non-linearity. Additionally, digital cancellation cancels residual self-interference. In linear conditions, digital cancellation can cancel self-interference of 40dB. Therefore, the SSD system has good BER performance because most of self-interference is canceled. But, in HPA non-linearity conditions, digital cancellation cancels residual self-interference of 25dB. In this conditions, self-interference is greater than desired signal. Therefore, bit informations of distant station can not be received. But, we confirm that if the proposed system uses pre-distorter then bit information of distant station can be received by HPA non-linearity compensation. Also, we confirm that even though the proposed system uses pre-distorter, if HPA non-linearity increases then digital cancellation performance is degraded by imperfect compensation of HPA non-linerity.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1264-1274
• /
• 1999

본 논문에서는 분산된 클록들을 주기적으로 동기화 시키는 분산 실시간 시스템에서 시간적 제약을 만족시키기 위한 정적/동적 시간 제약(timing constraint) 변환 기법을 제안한다. 전형적인 이산클록동기화(discrete clock synchronization) 알고리즘은 클록의 값을 순간적으로 조정하여 클록의 시간이 불연속적으로 진행한다. 이러한 시간상의 불연속성은 시간적 이벤트를 잃어버리거나 다시 발생시키는 오류를 범하게 한다.클록 시간의 불연속성을 피하기 위해 일반적으로 연속클록동기화(continuous clock synchronization) 기법이 제안되고 있지만 소프트웨어적으로 구현되면 많은 오버헤드를 유발시키는 문제점이 있다. 본 논문에서는 시간적 제약을 동적으로 변환시키는 DCT (Dynamic Constraint Transformation) 기법을 제안하였으며, 이를 통해 기존의 이산클록동기화 알고리즘을 수정하지 않고서도 클록 시간의 불연속성에 의한 문제점들을 해결할 수 있도록 하였다. 아울러 DCT에 의해 이산클록동기화 하에서 생성된 태스크 스케쥴이 연속클록동기화에 의해 생성된 스케쥴과 동일함을 증명하여 DCT의 동작이 이론적으로 정확함을 증명하였다.또한 분산 실시간 시스템에서 지역 클록(local clock)이 기준 클록과 완벽하게 일치하지 않아서 발생하는 스케쥴링상의 문제점을 다루었다. 이를 위해 먼저 두 가지의 스케쥴링 가능성, 지역적 스케쥴링 가능성(local schedulability)과 전역적 스케쥴링 가능성(global schedulability)을 정의하고, 이를 위해 시간적 제약을 정적으로 변환시키는 SCT (Static Constraint Transformation) 기법을 제안하였다. SCT를 통해 지역적으로 스케쥴링 가능한 태스크는 전역적으로 스케쥴링이 가능하므로, 단지 지역적 스케쥴링 가능성만을 검사하면 스케쥴링 문제를 해결할 수 있도록 하였고 이를 수학적으로 증명하였다.Abstract In this paper, we present static and dynamic constraint transformation techniques for ensuring timing requirements in a distributed real-time system possessing periodically synchronized distributed local clocks. Traditional discrete clock synchronization algorithms that adjust local clocks instantaneously yield time discontinuities. Such time discontinuities lead to the loss or the gain of events, thus raising serious run-time faults.While continuous clock synchronization is generally suggested to avoid the time discontinuity problem, it incurs too much run-time overhead to be implemented in software. We propose a dynamic constraint transformation (DCT) technique which can solve the problem without modifying discrete clock synchronization algorithms. We formally prove the correctness of the DCT by showing that the DCT with discrete clock synchronization generates the same task schedule as the continuous clock synchronization.We also investigate schedulability problems that arise when imperfect local clocks are used in distributed real-time systems. We first define two notions of schedulability, global schedulability and local schedulability, and then present a static constraint transformation (SCT) technique. The SCT ensures that it is sufficient to check the schedulability of a task locally in a node with a local clock, since the global schedulability of the task is derived from its local schedulability through SCT. We formally prove the correctness of SCT.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.99-99
• /
• 2013

In this talk, I will present two research works in progress, which are: i) mapping of piezoelectric polarization and associated charge density distribution in the heteroepitaxial InGaN/GaN multi-quantum well (MQW) structure of a light emitting diode (LED) by using inline electron holography and ii) in-situ observation of the polarization switching process of an ferroelectric Pb(Zr1-x,Tix)O3 (PZT) thin film capacitor under an applied electric field in transmission electron microscope (TEM). In the first part, I will show that strain as well as total charge density distributions can be mapped quantitatively across all the functional layers constituting a LED, including n-type GaN, InGaN/GaN MQWs, and p-type GaN with sub-nm spatial resolution (~0.8 nm) by using inline electron holography. The experimentally obtained strain maps were verified by comparison with finite element method simulations and confirmed that not only InGaN QWs (2.5 nm in thickness) but also GaN QBs (10 nm in thickness) in the MQW structure are strained complementary to accommodate the lattice misfit strain. Because of this complementary strain of GaN QBs, the strain gradient and also (piezoelectric) polarization gradient across the MQW changes more steeply than expected, resulting in more polarization charge density at the MQW interfaces than the typically expected value from the spontaneous polarization mismatch alone. By quantitative and comparative analysis of the total charge density map with the polarization charge map, we can clarify what extent of the polarization charges are compensated by the electrons supplied from the n-doped GaN QBs. Comparison with the simulated energy band diagrams with various screening parameters show that only 60% of the net polarization charges are compensated by the electrons from the GaN QBs, which results in the internal field of ~2.0 MV cm-1 across each pair of GaN/InGaN of the MQW structure. In the second part of my talk, I will present in-situ observations of the polarization switching process of a planar Ni/PZT/SrRuO3 capacitor using TEM. We observed the preferential, but asymmetric, nucleation and forward growth of switched c-domains at the PZT/electrode interfaces arising from the built-in electric field beneath each interface. The subsequent sideways growth was inhibited by the depolarization field due to the imperfect charge compensation at the counter electrode and preexisting a-domain walls, leading to asymmetric switching. It was found that the preexisting a-domains split into fine a- and c-domains constituting a $90^{\circ}$ stripe domain pattern during the $180^{\circ}$ polarization switching process, revealing that these domains also actively participated in the out-of-plane polarization switching. The real-time observations uncovered the origin of the switching asymmetry and further clarified the importance of charged domain walls and the interfaces with electrodes in the ferroelectric switching processes.

• Journal of Veterinary Clinics
• /
• v.33 no.2
• /
• pp.102-106
• /
• 2016

More than 20 years after the first report of porcine reproductive and respiratory syndrome virus (PRRSV) in Korea, the disease is still having major impact on domestic pig health and relevant industries. Although ELISA tests are commonly used by veterinarians to guide herd management, data on diagnostic performance of the test in field settings are very limited. The objective of this study was to evaluate two commercially available PRRSV ELISA (IDEXX PRRS X3 ELISA and Bionote PRRSV ELISA 4.0) to detect antibodies against PRRSV on serum samples. To this end, a total of 1,108 sera were recruited from 35 swine farms located in Gyeonggi province and tested at the Gyeonggi Province Veterinary Service Center. All tests were performed according to the manufacturer's instructions, by laboratory technicians who routinely perform PRRS testing on blood samples. Samples were collected from two sources of swine populations with different PRRS prevalence; 60 samples (5.4%) were originated from breeding farms and the remaining 1,048 samples (94.6%) were from farrow-to-finish farms. We applied Bayesian latent class model (LCM) for two-tests in the two-population when the accuracy of the gold standard is not available. The model estimated that Bionote ELISA was a bit more specific but slightly less sensitive. The estimated sensitivity and specificity of the IDEXX ELISA were 99.8% (95% CI 98.1-100%) and 86.4% (95% CI 81.4-96.5%), respectively. Sensitivity, specificity, positive predictive value and negative predictive value for Bionote kit were 98.7% (95% CI 92.8-100%), 89.8% (95% CI 86.2-93.1%), 93.8% (95% CI 91.5-96.0%), and 97.8% (95% CI 87.1-100%), respectively. Based on the Bayesian 95% credible intervals, the sensitivity and specificity of the two ELISAs were not significantly different each other when assuming that two kits were imperfect, indicating that two kits performed equally well in terms of sensitivity and specificity in our filed setting.

• The Korean Journal of Mycology
• /
• v.10 no.1
• /
• pp.7-13
• /
• 1982

Habit characteristics of imperfect and perfect stage of D. bryoniae encountered on naturally infected seeds of cucumber and pumpkin were studied by the blotter method and compared with those grown on Difco potato dextrose agar (PDA), V-8 juice agar and water agar leaf medium (WALM). Most of the pycnidiospores obtained from each isolate of this fungus grown on PDA were non-septate and microtype. Non-septate pycnidiospores were predominanted in all isolates, but a macrotype of the non-septate and a number of uniseptate pycnidiospores were produced on V-8 juice agar and water agar leaf medium. On seed the pycnidiospores were mostly non -septate, but rarely uniseptate ones were also found. On radicle of cucumber seed, the pycnidiospores were non-septate and uniseptate but small percentage biseptate with somewhat constricted at septa. Pycnidiospores produced on V-8 juice agar and water agar leaf medium were similar to those produced on seeds. In the present investigation the perithecia were mostly globose to subglobose with apical papillate ostiole and whitish spore masses formed on the ostiole of perithecia, either on naturally infected seed or on culture media. The mature perithecia were dark brown to black. They were partially embedded or erumpent on seed coat and culture media. The perithecia varied in size within a much narrower range than the pycnidia. But perithecial formation of this fungus on PDA, V-8 juice agar, WALM and seed varied considerably depending upon isolate and culture media.