• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.1-7
• /
• 2004

The development of direct receiver techniques is expected to be a solution for future wideband or multi-band wireless systems based on software defined radio. In this Paper, we study the regeneration of I and Q signals for the SDR based direct conversion receiver, so that we can handle a wide bandwidth and maintain maximal flexibility in system utilization. After modeling the basic system considering the real wireless communication environment, and studying the impact of imperfect phase imbalance on the performance of a direct conversion receiver, we propose a suboptimal I and Q signal regeneration algorithm for the system. The proposed algerian regenerates I and Q signals using a real time early-late compensator which effectively estimates phase imbalances and gives feedback in a directreceiver. The proposed algorithm is shown to mitigate the impact of AWGN and improves performance especially at low SNR channel condition. According to the computer simulation, the BER performance of the proposed system is at least about 4 dB better than conventional systems under $45{\~}55$ degrees random phase errors.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.21-40
• /
• 2018

In this paper, we propose the distributed robust beamforming design scheme in cognitive two-way amplify-and-forward (AF) relay networks with imperfect channel state information (CSI). Assuming the CSI errors follow a complex Gaussian distribution, the objective of this paper is to design the robust beamformer which minimizes the total transmit power of the collaborative relays. This design will guarantee the outage probability of signal-to-interference-plus-noise ratio (SINR) beyond a target level at each secondary user (SU), and satisfies the outage probability of interference generated on the primary user (PU) above the predetermined maximum tolerable interference power. Due to the multiple CSI uncertainties in the two-way transmission, the probabilistic constrained optimization problem is intractable and difficult to obtain a closed-form solution. To deal with this, we reformulate the problem to the standard form through a series of matrix transformations. We then accomplish the problem by using the probabilistic approach based on two sorts of Bernstein-type inequalities and the worst-case approach based on S-Procedure. The simulation results indicate that the robust beamforming designs based on the probabilistic method and the worst-case method are both robust to the CSI errors. Meanwhile, the probabilistic method can provide higher feasibility rate and consumes less power.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.285-291
• /
• 2011

The error motion of a machine tool spindle directly affects the surface errors of machined parts. The error motions of the spindle are not desired errors in the three linear direction motions and two rotating motions. Those are usually due to the imperfect of bearings, stiffness of spindle, assembly errors, external force or unbalance of rotors. The error motions of the spindle have been needed to be decreased to desired goal of spindle's performance. The level of error motion is needed to be estimated during the design and assembly process of the spindle. In this paper, the estimation method for the five degree of freedom (5 D.O.F) error motions of the spindle is suggested. To estimate the error motions of the spindle, waviness of shaft and bearings, external force model was used as input data. And, the estimation models are considering geometric relationship and force equilibrium of the five degree of the freedom. To calculate error motions of the spindle, not only imperfection of the shaft, bearings, such as rolling element bearing, hydrostatic bearing, and aerostatic bearing, but also driving elements such as worm, pulley, and direct driving motor systems, were considered.

• Research in Plant Disease
• /
• v.8 no.4
• /
• pp.228-233
• /
• 2002

This experiment was carried out to investigate the primary inoculum of strawberry anthracnose in nursery field. The pathogen, Colletotrichum gloeosporioides was not detected in soil and weeds of nursery field but symptom of anthracnose was developed in mother plants collected from market after incubation in humid chamber, The symptom of anthracnose was expressed in the strawberry plant that reserved for 17 days in field after inoculation by spore suspension but was not observed there after. When inoculated leaves were observed by SEM, only appressoria were observed 7 days after inoculation. So, it is guessed that dissemination of Colletotrichum sp. into nursery held will be by contamination of mother plants, and diagnosis by naked eyes may be impossible because symptom will be not developed if environment is to be adequate to penetration and in case of imperfect penetration after germination, the pathogen remains appressorium to achieve penetration.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.57-62
• /
• 2014

With synthesis temperature and adding amount of oleylamine, nanometer-sized Cu particles were fabricated by heptyl alcohol-based chemical synthesis. The synthetic temperature and amount of oleylamine changed excessively the shape and phase of synthesized nanoparticles. Only cubic-shaped $Cu_2O$ phase was formed at $160^{\circ}C$ regardless of the amount of oleylamine because of imperfect reduction reaction, representing results that the average size of $Cu_2O$ particles decreased with increasing the amount of oleylamine. In the case the synthesis at $170^{\circ}C$, however, nanoparticles of irregular sphere or peanut shapes were synthesized. Moreover, the average size of nanoparticles decreased continuously and gradually with an increase of the amount of oleylamine. According to the size decrease, the synthesized $Cu_2O$ nanoparticles were also transformed into pure Cu nanoparticles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.35-42
• /
• 2017

NOMA (Non-orthogonal multiple access) system is the most promising multiple access technology to satisfy the requirements of the spectral efficiency and the performance of 5G cellular systems. NOMA system simultaneously serves multiple users in the power domain, and adapts SIC (Successive interference cancellation) at the receivers to cancel the interference from multiple users. Since in a realistic wireless fading channel the perfect SIC is impossible, the study of the effect of the imperfect SIC to a NOMA system is necessary. This paper considers a cooperative NOMA system with SIC error, and the performance of the system is analytically derived. And the optimum power allocation to minimize the system performance is obtained. When the transmit power is fixed, the distances between a base station and the relay is considered for different SIC errors. The derived analytical results are verified through Monte Carlo simulation, and the results are perfectly matched.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.97-106
• /
• 2003

In ARQ based error control, imperfect error detection leaves error remains on a packet. Aiming for a reduction of error remains in multicopy transmission ARQ system, we propose a rule of requesting a retransmission and deciding a correct copy, (identified as $(m, \;{\sigma})$rule). While the probability of error remains is reduced by the employment of the $(m, \;{\sigma})$ rule at multicopy transmission ARQ, delay and throughput performance may be degraded in comparison with those of conventional single copy transmission ARQ. Thus, we develop an analytical method to evaluate the performance trade-off in multicopy transmission ARQ following the $(m, \;{\sigma})$ rule. From the numerical results obtained by the analytical method, we investigate the effect of channel characteristics on the performance of error remains, packet loss, throughput, and packet delay, and confirm that the adaptability of the $(m, \;{\sigma})$ rule to conform to various QoS requirements with ease.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• The Korean Journal of Financial Management
• /
• v.22 no.2
• /
• pp.213-226
• /
• 2005

Adverse selection is a heavily scrutinized subject within the financial intermediary industry. Consensus is reached regarding its effect on the loan interest rate. Despite the similar features of financial service offered by the credit card, we still have controversy regarding credit card interest rate on how is adverse selection incurred with the change of interest rate. Thus, this paper explores how does the adverse selection, if ever, take place and affect the credit card interest rate. Information asymmetry regarding the credit card users' type represented by the default probability is assumed. The users are assumed to be rational in that they want to minimize the per unit dollar expense associated with the commercial transaction and financing between the two typical payment methods, cash and credit card. Suppliers, i.e. credit card companies, would like to maximize their profit and would be better off with more pervasive use of credit cards over the cash. Then we could show that the increasing credit card interest rate is subject to the adverse selection, sharing the same tenet with that of the bank loan interest rate proposed by Stiglitz and Weiss. Hence the current theory predicts that credit card market also suffers from adverse selection with increasing interest rate.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.1-9
• /
• 1983

The leaves and young shoots of several broad leaf trees infected with powdery mildew fungi were collected and observed for the purpose of seeking for the host plants and identifying its pathogenic fungi in the arboretum of Forest Research Institute, Seoul from October to November 1982. Of these, Prunus serrulata var. spontanea, Prunus padus, Celastrus flagellaris, and Fraxinus ${\times}$ chiisanensis were found out to be new host plants of powdery mildew fungi in korea. Morphological characteristics of imperfect state and perfect state of powdery mildew fungi on 4 new host plants were examined. These pathogenic fungi were identified as Podosphaera tridactyla, Uncinula sengokui, and Uncinula fraxini.