• 제목/요약/키워드: impedance bandwidth

검색결과 636건 처리시간 0.029초

고속 전력선 통신용 옥내 저전압 전력선 임피던스 측정 및 특성 연구 (Investigation and measurement of indoor low voltage powerline impedance for high data rate powerline communications (PLC))

  • 박영진;김관호
    • 대한전자공학회논문지TC
    • /
    • 제41권8호
    • /
    • pp.93-97
    • /
    • 2004
  • 전력선 통신의 매체인 전력선은 60Hz 전력 공급을 위해 설계되었기 때문에 고속 전력선 통신을 위한 1MHz∼30MHz 대역에서는 전력선은 전기적으로 많은 다른 특징을 갖는다. 따라서 고속 전력선 통신을 위해서는 전력선의 고주파 특성-감쇄 지연, 임피던스-등이 자세하게 분석되고 연구되어야 한다. 본 논문에서는 고속 전력선 통신용 1MHz∼30MHz 주파수 대역 옥내저압 전력선 (220V) 임피던스를 측정하였다. 벡터 회로망 분석기와 저압 전력선 결합 장치(coupling unit)를 이용하여 임피던스를 측정하였다. 결합 장치를 T형 등가회로로 바꾸어, 전체 회로에서 얻은 산란계수를 이용하여 저압 전력선 임피던스를 구했다. 제안된 방법으로 표준 한국형 저층 연립 아파트에 대한 임피던스를 측정하고, 그 특성을 분석하였다. 또한 임피던스 정합을 위하여 평균 임피던스를 구하였고, 측정결과 평균 임피던스는 약 100Ω이었다.

대역통과 정합회로를 이용한 수중음향변환기의 대역폭 확장 (Bandwidth Enhancement of Underwater Acoustic Transducer Using a Bandpass Matching Network)

  • 이대재
    • 한국수산과학회지
    • /
    • 제52권6호
    • /
    • pp.702-708
    • /
    • 2019
  • The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

접지면 변형에 의한 원형 루프를 갖은 광대역 모노폴 안테나 (A Broadband Monopole Antenna with Ring Loop By Modified Ground Plane)

  • 이현진;임용무
    • 전기학회논문지P
    • /
    • 제61권3호
    • /
    • pp.149-152
    • /
    • 2012
  • In this paper, a wideband monopole antenna with ring loop by modified ground plane is presented. The proposed antenna consist of monopole antenna, ring loop by ground plane. This antenna is fed CPW-fed and wide slot antenna of a novel structure for broadband characteristics is proposed. To enhance the impedance bandwidth of the wide slot antenna, we proposed the wide slot structure with CPW-fed which is combined with four ${\lambda}/2$ rectangular radiation modified monopole and inductively coupled. The measured impedance bandwidth is about 2.5 GHz(3.65~6.15 GHz) then less -10 dB.

Design of Broadband Microstrip Patch Antenna for Mobile Communications

  • Kim, Jang-Wook;Jeon, Joo-Seong
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권4호
    • /
    • pp.67-74
    • /
    • 2017
  • The objective of this paper is to design broadband microstrip patch antenna for mobile communication service. The enhanced features were confirmed and proved by comparing the proposed antenna with the antennae that have been reported in the relevant literatures. The experimental results show that the impedance bandwidth(VSWR ${\leq}2$) of 19.6%(fo=1,920MHz) and the peak gain of 5.53dBi(at 1,900MHz) were obtained by the mobile communication service frequency band. The proposed antenna had the impedance bandwidth of about 3.1% larger than that of the reported microstrip antenna.

$\lambda$g/4 개방 마이크로스트립 선로 스로트의 배열 (A Quarter-Wavelength Open Circuited Microstripline Slot Array)

  • 배정이
    • 대한전자공학회논문지
    • /
    • 제19권6호
    • /
    • pp.80-83
    • /
    • 1982
  • X-밴드 주파수에서 λg/4 개방 마이크로스트립 선로 급전형 스로트 점렬을 구현하였다. 최적 급전점은 실험적으로 결정하였고 스로트 점각의 여러 주파수에서 입력 임피던스와 복재 패턴을 측정하였으며 다소 다른 길이의 16개 소자와 본 논문에서 제시한 급전 선로를 사용하여 주파수 대역을 증가시켜 보았다. A quarter-wavelength open circuited microstripline slot array is realized at X-band froquency. The optimal feeding point is experimentally determined. The input impedance of the slot array for various frequencies and its radiation pattern are measured. The bandwidth of the slot array is increased by using the 4×4 elements which are slightly different in length and feeding network which is suggested in this papers.

  • PDF

A Compact Microstrip Patch Antenna Based on Metamaterials for Wi-Fi and WiMAX Applications

  • Nelaturi, Suman;Sarma, Nookala Venkata Satya Narasimha
    • Journal of electromagnetic engineering and science
    • /
    • 제18권3호
    • /
    • pp.182-187
    • /
    • 2018
  • A low profile asymmetrical fractal boundary patch antenna based on reactive impedance surface (RIS) and a mushroom unit cell (MUC) is proposed and studied for dual band operation. The sides of the square patch antenna are replaced with asymmetrical half circled fractal curves for circular polarization operation at patch mode band. The fractal patch antenna is loaded with MUC for dual band operation. The antenna radiation characteristics are investigated and illustrated with both simulated and experimental results in detail. The 10-dB return loss bandwidth are 8.48% (3.21-3.49 GHz) and 2.59% (2.30-2.36 GHz) at upper and lower resonance frequencies, respectively. The 3-dB axial ratio bandwidth is 4.26% (3.21-3.35 GHz). A close agreement between simulation data with experimental results is observed.

Measurement and Explanation of DC/RF Power Loci of an Active Patch Antenna

  • Mcewan, Neil J.;Ali, Nazar T.;Mezher, Kahtan A.;El-Khazmi, Elmahdi A.;Abd-Alhameed, Raed A.
    • ETRI Journal
    • /
    • 제33권1호
    • /
    • pp.6-12
    • /
    • 2011
  • A case study of an active transmitting patch antenna revealed a characteristic loop locus of DC power versus RF output power as drive frequency was varied, with an operational bandwidth substantially smaller than the impedance bandwidth of the radiator. An approximate simulation technique, based on separation of the output capacitance of the power transistor, yielded easily visualized plots of power dependence on internal load impedance, and a simple interpretation of the experimental results in terms of a near-resonance condition between the output capacitance and output packaging inductance.

개구 결합 급전 방식의 Ku 밴드 U 슬롯 마이크로스트립 안테나 설계 및 제작 (Aperture-Coupled Wideband U-slot Microstrip Patch Antenna at Ku Band)

  • 유명완;이범선
    • 한국전자파학회논문지
    • /
    • 제10권4호
    • /
    • pp.636-644
    • /
    • 1999
  • 상대 유전율이 2.5인 태프론 기판(31 mil)과 상대 유전율이 1.06인 Foam을 이용하여 개구 결합 급전 방식 의 Ku 밴드 U 슬롯 마이크로 스트립 안테나플 섣계 및 제착하고 반사손실, 동일/교차 편파 방사패턴. 이득 등을 측정하였다. Foam을 사용한 경우 교차편파와 후방방사를 적절한 크기 이내로 제한하는 범위 내에서 38 %정도의 임피던스 대역폭을 보였으며 시율레이션 결과와 잘 일치하였다. 동일/교차 편파 방사 패턴도 시율 레이션 결과와 유사하였다.

  • PDF

Broadband Microstrip Patch Antenna

  • 이호준;이재영;김종규
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.230-233
    • /
    • 2003
  • In this paper, the wideband microstrip patch antennas for the Personal communications Service $(PCS\;:\;1750\~1870\;MHz)$ and International Mobile Telecommunications-2000 $(IMT-2000\;:\;1920\~2170\;MHz)$ dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfied the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS and IMT-2000 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS & IMT-2000 base station antenna. An impedance bandwidth of $31\%(VSWR<1.5,\;615\;MHz)$ and a maximum gain of 7dBi can be achieved. The radiation pattern is stable across the passband.

  • PDF

CPW 급전 광대역 슬롯 안테나 설계 (Design of Wide-Band Slot Antenna with CPW-Fed)

  • 신경섭;김영두;염찬규;이홍민
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.524-527
    • /
    • 2003
  • In this paper, a new design for a Coplanar Waveguide (CPW) fed wide-band slot antenna is presented. To enhance the impedance bandwidth of the slot antenna, we proposed the tapering slot structure. A various resonance modes are generated in the tapering slot. The impedance bandwidth of the proposed antenna is about 12:1 ($2.0GHz{\sim}24.3GHz$) with $VSWR{\le}2$. Simulation results for return loss and radiation pattern are presented.

  • PDF