• 한국시뮬레이션학회논문지
• /
• 제14권2호
• /
• pp.45-55
• /
• 2005

There are electric double layer capacitance, polarization resistance and solution resistance in the interface between electrode and solution. Electrode process could be evaluated by the electrical impedance analysis. The necessities of the electrochemical cell analysis with high speed impedance analyzer are followings: minimization of the effects of electric stimulation on electrochemical cell and the concentration of reactive materials, and optimization of impedance signal resolution. This paper represents the design criteria for the selection and stimulation to develop fast impedance analyzer prototype for a electrochemical cell. It was suggested that the design of 470k sample/s sampling rate, 13 bit ABC resolution, and 140ms recording time is required for high speed impedance analysis system in frequency range between dc and 10kHz.

• 정보학연구
• /
• 제8권3호
• /
• pp.25-33
• /
• 2005

This paper describe a method for measuring line impedance as a function of frequency for an energized powerline in normal operation. A small sinusoidal signal of a powerline communication utility frequency 30khz$\sim$1Mhz band is continuously injected into the line, and a implemented impedance analyzer calculates the indoor powerline channel impedance from the measured magnitude and phase of resulting voltage and current. The impedance measurement is executed over a range of frequencies to produce a wideband impedance versus frequency characteristic. Implemented impedance analyzer can analysis powerline communication environments measuring line impedance due to load caused in indoor. And measured analysis information through the database can use to evaluate performance of modem and to decide test environment standard.

• 대한전자공학회논문지TC
• /
• 제42권11호
• /
• pp.79-86
• /
• 2005

본 논문에서는 정상적으로 전기가 공급되고 있는 전력선상에서 주파수의 함수로 표현되는 임피던스 측정 방법을 기술한다. 측정방법으로 전력선 통신사용 주파수 $30Khz\~1Mhz$ 대역의 미소 신호를 연속적으로 전력선에 주입하고, 구현한 임피던스 측정 장치는 측정된 전압과 전류의 크기와 위상으로부터 옥내 채널 임피던스를 계산한다. 임피던스 측정에 있어 광대역 주파수 범위의 임피던스 대 주파수 특성을 수행한다. 구현된 임피던스 측정 장치는 옥내에서 발생하는 부하에 의해 변화하는 전력선 임피던스를 측정하여 전력선 통신 환경을 분석할 수 있는 장비이다. 측정된 데이터는 데이터베이스화 하여 전력선 통신 모뎀의 통신성능 평가 및 테스트 환경 기준 설정에 유용하게 사용될 수 있을 것이다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.473-480
• /
• 2020

In this paper, we proposed a high frequency equivalent circuit considering parasitic impedance components for differential noise analysis on the input stage during DC-DC buck converter switching operation. Based on the proposed equivalent circuit model, we presented a method to measure parasitic impedance parameters included in DC bus plate, IGBT, and PCB track using the gain phase method of a network analyzer. In order to verify the validity of this model, a DC-DC prototype consisting of a buck converter, a signal analyzer, and a LISN device, and then resonance frequency was measured in the frequency range between 150 kHz and 30 MHz. The validity of the parasitic impedance measurement method and the proposed equivalent model is verified by deriving that the measured resonance frequency and the resonance frequency of the proposed high frequency equivalent model are the same.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.139-155
• /
• 2011

Polymeric thin-film assemblies whose bulk electrical conductivity and mechanical performance have been enhanced by single-walled carbon nanotubes are proposed for measuring strain and corrosion activity in metallic structural systems. Similar to the dermatological system found in animals, the proposed self-sensing thin-film assembly supports spatial strain and pH sensing via localized changes in electrical conductivity. Specifically, electrical impedance tomography (EIT) is used to create detailed mappings of film conductivity over its complete surface area using electrical measurements taken at the film boundary. While EIT is a powerful means of mapping the sensing skin's spatial response, it requires a data acquisition system capable of taking electrical impedance measurements on a large number of electrodes. A low-cost wireless impedance analyzer is proposed to fully automate EIT data acquisition. The key attribute of the device is a flexible sinusoidal waveform generator capable of generating regulated current signals with frequencies from near-DC to 20 MHz. Furthermore, a multiplexed sensing interface offers 32 addressable channels from which voltage measurements can be made. A wireless interface is included to eliminate the cumbersome wiring often required for data acquisition in a structure. The functionality of the wireless impedance analyzer is illustrated on an experimental setup with the system used for automated acquisition of electrical impedance measurements taken on the boundary of a bio-inspired sensing skin recently proposed for structural health monitoring.

• 대한의용생체공학회:의공학회지
• /
• 제23권5호
• /
• pp.413-418
• /
• 2002

본 연구에서는 변기에 앉아 있을 때 체성분을 효과적으로 측정할 수 있는 체임피던스 측정기(Bioelectrical Impedance Analyzer, BIA)를 개발하고, 이 시스템으로 정확한 체성분 값을 구할 수 있는 방정식을 도출하였다. 이를 위해 설계한 하드웨어고 건강한 한국인 남·여 181명의 체임피던스 값을 변기에 적합한 전극 부착 위치(손목, 허벅지)에서 획득였다. 같은 피험자를 대상으로 기존의 한국인에게 적용시 정확도의 문제를 내포하는 수중체중법의 Siri 방정식을 modified-Siri 방정식으로 적용함으로서 한국인의 제지방량 표준값을 산출하였다. 이 표준값을 기준으로 임피던스 지수, 체중, 성별로 한국인의 제지방을 예측하는 추정식을 얻었다. 제지방량의 추정값과 표준값 사이의 상관계수(r)는 0.977로 높은 관련성을 나타냈으며, SEE(Standard Error of Estimation)은 2.47kg으로 낮은 오차를 나타냈다(p<0.05). 이는 기존의 전극 부착위치인 손목과 발목을 같은 피험자에 적용하여 체임피던스에 의한 제지방량 추정식을 세울 때, 추정값과 표준값 사이의 상관계수(r = 0.978) 및 SEE(2.43kg)와 큰 차이가 없는 것으로 나타났다. 또한. 이중교차검증(Double Cross Validation)을 통해 실험에 참가하지 않은 피검자에 대한 적용 가능성도 유효한 것으로 나타나 본 논문에서 설계한 체임피던스 분석기와 추정식은 한국인의 제지방량을 산출하는데 적합한 것으로 평가되었다.

• 한국전자파학회논문지
• /
• 제26권12호
• /
• pp.1072-1082
• /
• 2015

본 논문에서는 스펙트럼 분석기를 이용하여 잡음 파라미터를 측정하는 2가지 방법을 제안하였다. 제안된 첫 번째 방법은 6-포트 회로망을 이용하여 잡음상관행렬을 측정하고, 이를 통해 잡음파라미터를 결정하는 방법이다. 그리고 제안된 두 번째 방법은 전원 임피던스의 변화에 따른 DUT의 잡음지수를 직접 측정하고, 이를 통해 잡음파라미터를 추출하는 방법이다. 전원 임피던스의 변화에 따른 잡음지수를 측정을 위해 스펙트럼 분석기를 이용, 임의의 전원 임피던스를 갖는 DUT의 잡음지수를 측정하는 방법과 전원 임피던스의 변화를 위해 사용한 임피던스 튜너가 DUT에 주는 잡음영향을 제거하는 방법을 보였다. 제안된 2가지의 방법으로 수동 및 능동 DUT에 대한 잡음파라미터를 측정하였고, 이를 비교하였다. 비교 결과, 2가지 방법에 대한 잡음 파라미터 결과가 일치하였다. 2가지 방법의 잡음 파라미터 결과가 일치하는 것은 6-포트 회로망으로 측정된 잡음파라미터가 전원 임피던스의 변화에 따라 측정된 DUT의 잡음지수를 정확히 예측한다는 것을 의미하며, 이를 통해 6-포트 회로망으로 측정된 잡음 파라미터 결과가 검증되었다.

• 센서학회지
• /
• 제14권1호
• /
• pp.33-41
• /
• 2005

For more convenient electrode-electrolyte interface impedance analysis in biosensor, a stand-alone impedance measurement system is required. In our study, we developed a PC-based portable system to analyze impedance of the electrochemical cell using microprocessor. The devised system consists of signal generator, programmable amplifiers, A/D converter, low pass filter, potentiostat, I/V converter, microprocessor, and PC interface. As a microprocessor, PIC16F877 which has the processing speed of 5 MIPS was used. For data acquisition, the sampling rate at 40 k samples/sec, resolution of 12 bit is used. RS-232 with 115.2 kbps speed is used for the PC communication. The square wave was used as stimuli signal for impedance analysis and voltage-controlled current measurement method of three-electrode-method were adopted. Acquired voltage and current data are calculated to multifrequency impedance signal after Fourier transform. To evaluate the implemented system, we set up the dummy cell as equivalent circuit of which was composed of resistor, parallel circuit of capacitor and resistor connected in parallel and measured the impedance of the dummy cell; the result showed that there exist accuracy within 5 % errors and reproduction within 1 % errors compared to output of Hioki LCR tester and HP impedance analyzer as a standard product. These results imply that it is possible to analyze electrode-electrolyte interface impedance quantitatively in biosensor and to implement the more portable high speed impedance analysis system compared to existing systems.

• 센서학회지
• /
• 제23권6호
• /
• pp.368-376
• /
• 2014

In order to measure the segmental impedance of the body, a bioelectrical impedance measurement system (BIMS) using multi-frequency applying method and two-electrode method was implemented in this study. The BIMS was composed of constant current source, automatic gain control, and multi-frequency generation units. Three experiments were performed using the BIMS and a commercial impedance analyzer (CIA). First, in order to evaluate the performance of the BIMS, four RC circuits connected with a resistor and capacitor in serial and/or parallel were composed. Bioelectrical impedance (BI) was measured by applying multi-frequencies -5, 10, 50, 100, 150, 200, 300, 400, and 500 KHz - to each circuit. BI values measured by the BIMS were in good agreement with those obtained by the CIA for four RC circuits. Second, after measuring BI at each frequency by applying multi-frequency to the left and right forearm and the popliteal region of the body, BI values measured by the BIMS were compared to those acquired by the CIA. Third, when the distance between electrodes was changed to 1, 3, 5, 7, 9, 11, 13, and 15 cm, BI by the BIMS was also compared to BI from the CIA. In addition, BI of extracellular fluid (ECF) was measured at each frequency ranging from 10 to 500 KHz. BI of intracellular fluid (ICF) was calculated by subtracting BI of ECF measured at 500 kHZ from BI measured at seven frequencies ranging from 50 to 500 KHz. BI of ICF and ECF decreased as the frequency increased. BI of ICF sharply decreased at frequencies above 300 KHz.

• 한국음향학회지
• /
• 제11권6호
• /
• pp.32-40
• /
• 1992

This study shows how the finite element method for the structural problems could be applied in the electromechanical impedance analysis of an in-air piezoelectric cylinder transducer and then compares the numerical results by the FEM with the measured results using the impedance analyzer. The results also show that the comparison between both results could be applied to examine the mechanical properties of the added unknown material to transducer such as an acoustic window.