• Computers and Concrete
• /
• v.8 no.1
• /
• pp.111-123
• /
• 2011

Severe element distortion problem is observed in finite element mesh while performing numerical simulations of high velocity steel projectiles penetration/perforation of concrete targets using finite element method (FEM). This problem of element distortion in Lagrangian formulation of FEM can be resolved by using element erosion methodology. Element erosion approach is applied in the finite element program by defining failure parameters as a condition for element elimination. In this study strain parameters for both compression and tension at failure are used as failure criteria. Since no direct method exists to determine these values, a calibration approach is used to establish suitable failure strain values while performing numerical simulations of ogive-nose steel projectile penetration/perforation into concrete target. A range of erosion parameters is suggested and adopted in concrete penetration/perforation tests to validate the suggested values. Good agreement between the numerical and field data is observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.29-29
• /
• 1998

실전 배치되어 운용 중인 무기체계는 여러 형태의 사고 위험이 항상 존재한다 이중에서도 특히 항공기나 함정에서 발생하는 사고는 그 피해가 막대하게 커질 수도 있어 항공기나 함정 자체에 위협을 줄 수도 있다. 이러한 사고위험으로부터 인적, 물적 자원을 보호하기 위하여 둔감탄약(Insensitive Munitions)에 대한 인식이 높아지고 있으며, 아울러 이러한 무기 체계를 효과적으로 시험 평가하는 규격들이 검토되기 시작하여 1991년에 "Hazards Assesment Tests for Non-Nuclear Ordnance, DoD-STD-2105"를 기초로 한 MIL-STD-2105B가 채택되었다. 본 논문에서는 MIL-STD-2105B의 해석과 그에 따른 둔감탄약 시험에 포함되는 Bullet Impact Test, Fast Cookoff Test, Slow Cookoff Test, Fragment Impact Test, Sympathetic Detonation Test 등의 시험들의 세부적인 시험방법과 그 결과에 대한 판정 기준을 서술하였다. 또한 유도무기의 추진기관을 모델로 하여 둔감탄약 시험의 기준을 제시하였고 이 시험을 통과하기 위하여 향후 연구, 개발하여야 할 분야를 서술하였다.

• Journal of Families and Better Life
• /
• v.22 no.4
• /
• pp.63-72
• /
• 2004

This study investigated the impact of parents' marital conflict and adult attachment on ego-resiliency among college students. The participants were three hundred sixty six undergraduate students (118 men and 248 women) enrolled in a university in Gyeongbuk Province. Survey questionnaires were used to measure parents' marital conflict perceived by the students, adult attachment, and ego-resiliency. Data were analyzed by means, standard deviations, t-tests, one-way ANOVA, Scheffe test, correlation, and multiple regressions. Results are summarized in the following: (1) Male students' ego-resiliency level was higher than lunate students'. (2) Students' ego-resiliency was higher in the group whose parents remained married than in the group whose parents did not. (3) The level of parents' marital conflict perceived by students was negatively correlated with their ego-resiliency. The level of adult attachment was positively correlated with students' ego-resiliency. (4) Regression analysis showed that adult attachment was more influential on college students' ego-resiliency than parents' marital conflict as perceived by the students.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.378-386
• /
• 2014

In this paper, safety evaluation method simulating battlefield environment was studied to verify military operability of commercial lithium secondary battery. Based on the MIL-STD-2105D and STANAG standards, safety tests of lithium secondary battery module were conducted, such as bullet impact, fragment impact, fast cook-off and slow cook-off. All results satisfied the safety evaluation criteria, founded on military standard. It suggests that the lithium secondary module has high potential to be applied in a military power source. The safety evaluation methods developed in this paper can be valuable to propose the new military standards for commercial lithium secondary batteries.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.976-984
• /
• 2005

This paper presents the analysis results of dynamics in the billiards game within the frame­work of rigid-body mechanics and a numerical simulation program. The friction exists between the ball and the table bed as well as between the ball and the rail. There are three parts in the dynamic behavior of the ball on the table bed; motion of the ball on the table bed, collision between balls, and collision between the ball and the cushion. During the development of the simulation program, the dynamics problems such as rolling motion and three-dimensional frictional impact motion have been analyzed in detail. The theoretical issues are implemented into a viable graphic simulation program and its efficacy is demonstrated through the experi­mental validation of the billiards game. The resulting analysis results are verified quantitatively and qualitatively using high-speed video camera. Through the experimental tests, it was found that the physical parameters such as coefficients of restitution and friction vary according to the motion variables and corresponding empirical formulations were developed. The simulation and experimental results agree well.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.56-62
• /
• 2006

Various kinds of rapid prototyping processes are available, such as stereo-lithography apparatus(SLA), fused deposition modeling(FDM), selective laser sintering(SLS), 3 dimensional printing(3DP), and laminated object manufacturing(LOM). In this study, benchmark tests are carried out to obtain detailed informations about surface roughness and mechanical properties of those parts. Although the patterns and roughness averages of part surface are dependent on the surface direction, the roughness of SLA part is the best and that of FDM or 3DP part is the worst. It is shown that FDM part has an advantage in impact strength, SLS(or EOS) part in compressive strength, and LOM part has an advantage in tensile strength and heat resistance, but the change of building direction in FDM and LOM processes severely weakens the tensile and impact strengths.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.336.2-336
• /
• 2002

There are many researches to identify the rigid body properties from the mass-line obtained by impact hammer testing. The correct rigid body properties of the structure may be estimated if the mass-line of the structure could be obtained exactly. When the structure is mounted by elastic materials, the mass-line cannot be read correctly from the impulse response spectrum. The reason is due to the effects of rigid body modes of mounted structure. (omitted)

• Asia-Pacific Journal of Business
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2016

This study attempts to investigate the effects of different types of debts on economic growth in Bangladesh using time series data spanning from 2000 to 2015. In this study, the RDL model has been applied to determine the long run relationship among the selected variables. The result of the ARDL model shows that there exists a long term relationship between economic growth and the debt variables. It was evident from the findings that there exists bidirectional causality between public sector external debt and economic growth. Causality between private external debt and economic growth has been found to be insignificant. However, causality between domestic debt and economic growth showed a unidirectional causality from domestic debt to economic growth and not vice versa. Causality tests suggest that impact of domestic debt on economic growth is more effective compared to external debts.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.97-105
• /
• 2001

현장타설말뚝의 건전도 평가에서 충격반향, 충격응답기법과 같은 비검측공 시험법을 적용하는 사례가 점차로 증가되는 추세에 있다. 비검측공시험법의 적용성을 체계적으로 평가하기 위해 수행된 일련의 연구결과 중에서 본 논문에서는 시험법의 결함탐지 능력을 평가하기 위해 수행된 해석적 연구결과에 관해 논한다. 이 연구에서는 시험법의 결함탐지능력에 대한 제반 영향인자 중에서 결함의 유형, 위치 및 크기의 영향을 평가하고자 하였다. 이를 위해서 여러 가지 조건에서 말뚝머리에 작용하는 충격하중에 대한 흙-말뚝 구조의 동적응답을 ABAQUS를 이용한 유한요소법으로 해석하였다. 이로부터 얻은 신호를 충격반향 혹은 충격응답기법으로 처리.분석하여 각 시험법의 결함탐지 능력을 평가해 보았다. 연구결과 이들 두 기법 모두 결함의 위치와 유형은 비교적 정확하게 탐지하는 것으로 나타났다. 그러나 충격응답기법을 이용하여 추정한 결함 크기는 신뢰도가 매우 낮았다. 이 문제를 해소하여 시험법의 적용성을 향상시키기 위해서는 측정된 동적응답신호를 이용하여 적절한 역계산 기법을 개발하여 적용할 필요가 있다는 결론을 얻었다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.107-114
• /
• 2001

비검측공 시험법을 현장타설말뚝의 건전도 평가 목적으로 적용함에 있어서 시험법의 적용성을 향상시키기 위한 연구가 진행되어 오고 있다. 본 논문에서는 같은 맥락에서 수행되어 온 일련의 해석적 연구 결과 중 시험법의 해상도에 관한 문제와 말뚝 주변 및 선단지반의 강성이 비검측공 시험결과에 미치는 영향에 관해 다루었다. 본 논문에서 수행한 연구결과에 의하면 충격응답기법의 해상도를 평가하기 위해서는 말뚝재료에 대한 지반의 강성비($V_{s}$ /$V_{c}$)와 말뚝의 길이에 대한 직경의 비(L/D)에 의존하는 기존 평가기준에 부가하여 말뚝의 상대적인 체적변화가 필히 고려되어야 한다는 결론을 얻었다. 한편, 말뚝이 수평으로 층이 진 주변 지반을 통과하여 말뚝선단부를 지지하는 지반(선단지반)에 근입되거나 지지되는 경우에 말뚝의 자유단 혹은 고정단 경계 조건은 주변 지반과 선단 지반의 강성비와 선단 지반에 대한 말뚝의 근입깊이에 따라 변화한다는 사실을 규명하였다. 말뚝의 건전도 평가 시에 사용하게 되는 말뚝의 공진주파수가 이들 조건에 따라 변화하므로 결과적으로 시험결과분석에 있어서 이들 영향이 필히 고려되어야 한다는 결론을 얻었다.