• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.87-95
• /
• 2008

One way to shield an atypical structure to secure the occupant safety of an impact vehicle is to stack energy absorbing material modules around the structure. To be applicable to a cushion module, material must have enough energy absorbing capabilities while satisfying the safety requirements of the vehicle occupant. Static compression test of the potential materials gives a good indication which material is good for a slacking module. This paper presents the mechanical properties that a cushion material must have to satisfy the safety requirements. Static tests are performed for Quard-Guard system module, sand bag, recycled tires, Geo-Container, Geo-Cell and Expanded Polystyren (EPS) Blocks. Static test results are discussed and EPS block of $30kg/m^{3}$ density showed good potential for a cushion module. To check the dynamic effect of EPS block, drop tests have been made up to 35.6km/h impact speed. Drop test results are compared with static test results and no appreciable difference was found. To improve the EPS module property, making holes to the block is suggested and drop test are performed for the modified blocks. From the drop test results, design values are suggested.

• The Korean Journal of Financial Management
• /
• v.23 no.2
• /
• pp.143-170
• /
• 2006

We explore how stock returns and volatility have been impacted by securities market stimulating and controlling plans during the 1980-2004 period, using return analysis, event study, and BFL tests. First, we examine effectiveness of the stimulating plans for a depressed market and the controlling plans for an overheated market with respect to different firm sizes and industries as well as the whole market. KOSPI, large-sized, finance, and manufacturing company stock prices significantly rise following stimulating plans, implying that the plans are quite effective. Controlling plans also seem effective as stock prices stop rising and tend to decline following the plans. Second, we test whether securities market plans have any further impact with respect to fun sizes and industries in addition to the impact on the entire market. Only large-sized stocks show additional response to stimulating plans, while small-sized, electrical-electronic equipment, distribution, and manufacturing industries are further impacted by controlling plans. Third, the results of BFL tests show that volatility does not change around the announcement dates of stimulating and controlling plans. It appears that securities market plans have no impact on volatility. Only stock returns respond to the plans.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.152-160
• /
• 1993

This paper presents experimental study of the static and dynamic fracture toughness behavior of a A1-6061 aluminum alloy reinforced alumina( .delta. -A1$_{2}$0$_{3}$) whiskers with 5%, 10%, 15% volume fraction. The static fracture tests using three-point bending specimen were performed by UTM25T. And drop weight impact tester performing dynamic fracture tests was used to measure dynamic locads applied to a fatigue-precracked specimes. The oneset of crack initiation was detected uwing a strain gage bonded near a crack tip. The value of static fracture toughness $K_{IC}$ and dynamic fracture toughness $K_{ID}$ were decided on the basis of linear elastic fracture mechanics. The effects of fiber volume fraction and loading on fracture toughness were investigated. The distribution of whiskers, bonding state and fracture interfaces involved in void, fiber pull-out state were investigated by optical microscopy(OM) and scanning electron microscopy(SEM)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.820-824
• /
• 1997

In order to investigate the effect of surface treatment(Anodizing) and rolling in Al 5083-H131 alloy, ballistic testing was conducted. Ballistic resistance of these materials. was measured by protection ballistic limit(V$_{50}$), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V$_{50}$ test and Projectile Through Plates(PTP) test at velocities greater than V$_{50}$. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes of Al 5052-H34 alloy, compared to those of Al 5083-H131 alloy.alloy.

• International Journal of Ocean System Engineering
• /
• v.3 no.4
• /
• pp.225-230
• /
• 2013

This paper introduces the experimental results of sloshing model tests carried out at Seoul National University. Two 1/50-scale tanks, i.e., 2D and 3D models with the same shape, were manufactured for the comparative study. Particular interest was taken in the differences in impact pressures between the 2D and 3D models. Regular motion tests were conducted for different filling depths. For each filling depth, 500 cycles of regular excitation were imposed at each frequency. To observe the characteristics and severity of sloshing from the acquired pressure data, statistical analyses were performed, not only for the peak pressure, but also for the area-concept indices, which represented the amount of impulse.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.93-101
• /
• 2008

It is difficult for a MWR(Missile Warning Radar) to perform a threat decision accurately since there is no tracking part which gives more accurate threat information to the MWR. In this paper, the threat decision algorithm is proposed using an azimuth angular rate to improve the accuracy. The azimuth angular rate is dependent upon the direction of an approaching target. The target is classified into a threat or non-threat using a boundary condition of the azimuth angular rate. The boundary condition is determined using the Monte-Carlo simulation. The performance of the proposed algorithm is evaluated using this condition at field tests of MWR. The efficiency of the proposed method for the threat decision is proved by comparing the results of field tests with the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.181.1-181
• /
• 2001

Human dummies are essential tools in the development of such sensible products as vehicles. Dummies are actively used not only in reach and view field tests, major ergonomic evaluations, but also in impact tests and perception evaluations. This study attempts to obtain possible correlations of human body segments from Korean anthropometric data. The investigation is focused on the description of human and dummy geometric and inertial properties. The modeling approach suggested is based on rigid body dynamics using fifteen individual body segments connected by joints. The segments are joined at locations representing the physical joints of the human body and have the mass of the body between body joints. For visualization, a three-dimension graphic technique is used ...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.795-798
• /
• 1997

This study is about the dynamic behavior of steel(SM45C). Dynamic tests were performed using SHPB(Split Hopkinson Pressure Bar) which is designed and modified to be used in both tensile and compressive modes. Quasi-static compression tests were also carried out for the comparison to the dynamic results. Not only the dynamic mechanical properties but also the effect of the notch of the specimen on stress-strain curve were investigated. The dynamic test results reveal that strain and stress are sensitively affected by the notch. The depth and the number of notch increase the stress and decrease the strain.

• Computers and Concrete
• /
• v.12 no.1
• /
• pp.79-90
• /
• 2013

In this study, dynamic characteristics such as natural frequencies, mode shapes and damping ratios of RC frame is determined for different construction stages using Operational Modal Analyses method under ambient vibration. Full scaled, one bay and one story RC frames are selected as an application for different construction stages such as plane, brick in-filled and brick in-filled with plaster. The RC frame is vibrated by natural excitations with small impact effects and the response signals are measured using sensitive accelerometers during ambient vibration tests. Measurement time-frequency span and effective mode number are determined by considering similar studies in literature. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, output-only system identification technique is employed namely; Enhanced Frequency Domain Decomposition technique in the frequency domain. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of RC frames.

• The Korean Journal of Financial Management
• /
• v.26 no.4
• /
• pp.103-140
• /
• 2009

This paper investigates various channels through which liquidity can affect stock returns and examines whether behavioral explanation for liquidity risk is reasonable. First, we examine whether liquidity level (average liquidity) plays a significant role in determining asset returns. The result is consistent with the hypothesis that a stock with higher average illiquidity will have a higher expected return. Second, we focus on the argument that liquidity has a non-diversifiable systematic component. If systemic liquidity has a different impact across individual securities, a stock that is more sensitive to systematic liquidity will have a higher expected return. The results of various tests are inconsistent with each other, not completely supporting the argument. Finally, the intra-market tests in Korea support the behavioral explanation for the liquidity premium, and the effect is stronger in the liquidity level than in the liquidity beta related to systematic liquidity.