• International Journal of Highway Engineering
• /
• v.18 no.4
• /
• pp.37-45
• /
• 2016

PURPOSES : The objective of this study was to develop an impact resonance (IR) test procedure for thin disk-shaped specimens in order to determine the ${\mid}E^*{\mid}$ and phase angle values of various asphalt mixtures. METHODS : An IR test procedure was developed for evaluating thin disk-shaped specimens, in order to determine the dynamic modulus (${\mid}E^*{\mid}$) of various asphalt mixtures. The IR test method that was developed to determine the elastic modulus values of Portland cement concrete was evaluated, which method uses axisymmetric flexural vibration proposed by Leming et al. (1996). The IR tests were performed on three different mixtures of New York with varying nominal maximum aggregate sizes (NY9.5, NY19, and NY25) at six different temperatures ($10-60^{\circ}C$). The ${\mid}E^*{\mid}$ values obtained from the IR tests were compared with those determined by the commonly used AASHTO T342-11 test. RESULTS AND CONCLUSIONS : The IR test method was employed to determine the ${\mid}E^*{\mid}$ values of thin-disk-shaped specimens of various asphalt mixtures. It was found that the IR test method when used with thin disk-like specimens is a simple, practical, and cheap tool for determining the ${\mid}E^*{\mid}$ values of field cores. Further, it was found the ${\mid}E^*{\mid}$ values obtained from the IR tests using thin disk-like specimens were almost similar to those obtained using the AASHTO T342-11 test.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2008

Forest fires occur the world over, with large-scale fires constantly breaking out. A suppressant a type of forest fire chemical is widely used to respond to fires rapidly and effectively. In general, suppressants used for fires have been divided into dry powder, liquid, foam, and gel type, according to physical form and use. This study has conducted toxicity tests relating to phytotoxicity(Pinus densiflora seed germination rate and mortality of containerized seedling), and soil organism toxicity(earthworm acute toxicity tests), of these suppressants, with the loaded stream suppressant for direct forest fire extinguishing a Loaded Stream and foam concentrates generally being used in Korea. From the results of the tests, the loaded stream and the foam concentrate had an effect on the toxicity levels. In the case of the loaded stream type, it was observed that toxicity indicating a 100% lethality rate was found among all toxicity test methods. Therefore, it is determined that forest ecology environmental toxicity impact assessments related to the suppressant used to extinguish forest fires are necessary in the near future.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.89-92
• /
• 2001

Drop weight impact tests were performed to investigate the impact behavior of carbon fiber/epoxy composite laminates reinforced by short fibers and other interleaving materials. Characterization techniques, such as cross-sectional fractography and scanning acoustic microscopy, were employed quantitatively to assess the internal damage of some composite laminates. Scanning electron microscopy was used to observe impact damage and fracture modes on specimen fracture surfaces. The results show that composite laminates experience various types of fracture; delamination, intra-ply cracking, matrix cracking and fiber breakage depending on the interlayer materials. Among the composite laminates tested in this study, the composites reinforced by Zylon fibers showed very good impact damage resistance with medium level of damage, while the composites interleaved by poly(ethylene-co-acrylic acid) (PEEA) film is expected to deteriorate the bulk strength due to the reduction of fiber volume fraction, even though the damaged area is significantly reduced.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.6
• /
• pp.427-439
• /
• 2006

Accurate estimates of in place thickness of early age (3 to 28 days after casting) concrete pavements are needed, where a thickness accuracy of ${\pm}6mm$ is desired. The impact-echo method is a standardized non-destructive technique that has been applied for this task. However, the ability of impact-echo to achieve this precision goal is affected by Vp (measured) and ${\beta}$ (assumed) values that are applied in the computation. A deeper understanding of the effects of these parameters on the accuracy of impact-echo should allow the technique to be improved to meet the desired accuracy goal. In this paper, the results of experimental tests carried out on a range of concrete slabs are reported. Impact-echo thickness estimation errors caused by material property gradients and sensor type are identified. Correction factors to the standard analysis method are proposed to correct the identified errors and to increase the accuracy of the standard method. Results show that improved accuracy can be obtained in the field by applying these recommendations with the standard impact-echo method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.125-132
• /
• 2007

In order to provide consumers with safety informations of vehicles according to the Korean New Car Assessment Program(KNCAP), the evaluation results and the star ratings of 21 vehicles for the side impact tests have been reported since 2003. Now, the KNCAP considers changing the side impact dummy from EuroSID-1 to EuroSID-2 near future. The rib deflection of EuroSID-2 is 20-30% higher than that of EuroSID-1 because of the removal of "Flat Tops" effect. In this study, the effect of changing the side impact dummy from EuroSID-1 to EuroSID-2 in the KNCAP side impact evaluation is estimated through the previous KNCAP evaluation results. The results show that the decrease of the star ratings would be one star($\bigstar$) approximately.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.38-45
• /
• 2010

Welding structures are designed to endure its expected life. The most important factors are life. Especially on welded structure, fatigue strength is critical. So this study performed a research on Box and T shape weldment specimen to examine the influence of welding type. In this experiment, the results indicate Box shape was available in more than T shape. Fatigue tests were performed to evaluate the fatigue strength of the both as-welded and statically pre-loaded specimens by 3 point bending load. Fatigue life can be improved by using Ultrasonic Impact Treatment(UIT) effect. Ultrasonic Impact Treatment(UIT) is excellent for eliminating the tensile residual stresses and generating compressive residual stresses which elevate fatigue strength of welded structures. Also, this shows that welding part has better fatigue life and welding was performed well. In this study, to evaluate the Ultrasonic Impact Treatment(UIT) effect, for welding structure, the experiment was conducted at various levels of stress range between 100MPa and 500MPa. From the test results, it was indicated that fatigue performance was improving by Ultrasonic Impact Treatment(UIT)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.440-449
• /
• 2003

Residual strength of fiber metal laminates after impact was studied. 3/4 lay up FML was fabricated using 4 ply prepreg, 2 ply aluminum sheets, and 1 ply steel sheet. Quasi isotropic ([0/45/90/-45]s) and orthotropic ([0/90/0/90]s) FRP were also fabricated to compare with FML. Impact test were conducted by using instrumented drop weight impact machine (Dynatup, Model 8250). Penetration load and absorbed energy of FML were superior to those of FRPs. Tensile tests were conducted to evaluate the residual strength after impact. Strength degradation of FML was less than that of FRP. This means that the damage tolerance of FML is excellent than that of FRP. Residual strength of each specimen was predicted by using Whitney and Nuismer(WN) Model. Impact damage area is assumed as a circular notch in WN model. Damage width is defined as the average of back face and top face damage width of each specimen. Average stress and point stress criterions were used to calculate the characteristic length. It is supposing that a characteristic length is a constant. The distribution of characteristic length shows that the assumption is reasonable. Prediction was well matched with experiment under both stress criterions.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.285-296
• /
• 2014

Recently, the use of Smartphones has been widespread and changed our lives positively. Smartphones which are called as PC in the hand and spread general people rapidly are becoming a medium to use generally various functions such as internet, work, multimedia, etc. beyond the simple function of telephone communication in the past. However, the excessive use of Smartphones has also produced many side effects. The purpose of this study is to examine the Smartphone Addiction on Daily Life Impact. This model tests various theoretical research hypotheses relating to Self-Esteem, Enjoyment, Flow, Social Impact, Smartphone Addiction and Daily life impact. The proposed model is analyzed to target 299 University Students and Smart Partial Least Square(PLS) 2.0 have been utilized for deriving the study results. The Result of Hypothesis testing are as follows. First, Self-Esteem negatively influence Smartphone Addiction. Second, Enjoyment, Flow and Social Impact positively influence Smartphone Addiction. Third, Smartphone Addiction positively influence Daily Life impact. This Research makes a basic research for smart phone addiction papers that will be investigated a lot in the future.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.391-402
• /
• 2011

Purpose: The purpose of this study was to investigate the factors affecting oral health impact profile. Methods: Subjects included elderly in the metropolitan areas of the cities of Daegu and Gyeong-buk. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using T-tests, analysis of variance, multiple regression analysis. Results: The results of multiple regression analysis between the oral health impact profile and the related factors indicated that Occupation, Economic status are the major component oral health impact profile in general characteristics and the Impediment of oral health promotion behavior is the major component that contribute the oral health impact profile in oral health belief. Conclusion: The comprehensive and reliable research which measures oral health impact profile of elderly is necessary.