• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3833-3838
• /
• 2009

This paper introduces a measurement system for mechanical properties of sport shoes using an industrial robot. The robot system used in this paper is a commercial Puma type robot system(FARA AT2 made by SAMSUNG Electronics) with 6 joints and the end-effector is modified to produce a human walking motion. After analyzing human walking with a high speed video camera, each joint angle of the robot system is extracted to be used in the robot system. By using this system, ground impact forces were measured during stepping motion with 3 different shoe specimens made of 3 different hardness outsoles, respectively. As other mechanical properties, both bending moments to bend the toe part of the same specimen shoes and pronation quantities during walking motion were measured as well. In the impact test with the same depth of deformation under the ground level, the effect of the outsole hardness was clearly appeared such that the harder outsole produces the higher ground reaction force. The bending test and the pronation test also show proportional increments in the bending stiffness and the moment Mx according to the outsole hardness. Throughout such experiments, the robot system has produced consistent results so that the system could be used in obtaining valuable informations for a shoe designing process.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.285-289
• /
• 2006

Background : North Korea's economic and public health problems began in the early 1990s as a result of the gradual loss of economic support from its communist allies, combined with an inordinate number of natural disasters. The decline in public health has increased the incidence of tuberculosis in North Koreans and refugees. This study investigated tuberculosis situation in North Korean refugees in order to prepare for the future impact of tuberculosis control in Korea. Material and Methods : From 2001 to 2005, tuberculosis patients among North Korean refugees who were diagnosed before or after arriving in South Korea, based on the official records of OO hospital, were enrolled in this study. The demographic and clinical data of the cases were evaluated retrospectively. Results : A total of 42 TB cases were reviewed during the study period. Of these, 37 (88.1%) cases were pulmonary TB. based on the cases identified among the number of North Korean refugees' arriving each year, the annual incidence of pulmonary TB were 900 per 100,000 in 2004, 700 in 2003, The number of smear-positive patients was 20 (47.6%) and the number of culture-positive patients was 18 (42.9%). Of the M. tuberculosis isolates, 2 cases were found to be susceptible to all anti-TB drugs available, 4 were resistant to isoniazid, and 3 were multi-drug resistant. Conclusion : The prevalence of pulmonary TB in North Korean Refugees is high. In addition, North Korean refugees suffer from more severe tuberculosis in bacteriological and radiological aspects.

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.403-419
• /
• 2017

This study analyzed the forces to drive the change of urban green spaces in Daegu from 1989 to 2009. First, the loss and fragmentation of green spaces in the past 20 years were spatially identified by performing the hot spots analysis for the cell-based spatial metrics quantifying the size and diversity of green spaces. Next, seven drivers such as slope, distance to roads, land price, population density, ratios of residential, commercial, and industrial areas were selected based on the previous studies and the direction of the association between the loss and fragmentation of green spaces and seven drivers was analyzed with the stepwise logistic regression. Finally, the relative importance of the seven drivers and their interactions in the past 20 years were analyzed with the geographical detector. The results show that the loss of green spaces was concentrated on a part of the Anshim housing development district from 1989 to 2009 and green spaces were highly fragmented around the housing development districts such as Seongseo, Anshim, Dalseong-gun and Chilgok. The forces to drive the loss and fragmentation of green spaces in these areas were different at the administrative levels, but the drivers such as slope and ratios of residential and industrial areas were commonly significant. These drivers were positively correlated with largest patch index(LPI) quantifying the loss of green spaces while they were negatively correlated with Shannon's diversity index(SHDI) measuring the fragmentation of green spaces. In other words, the loss and fragmentation of urban green spaces in Daegu appeared around such regions with lower slope and lower ratios of residential and industrial areas. The relative importance of drivers for LPI was listed as ratio of industrial area, land price, and ratio of commercial area in descending order whereas that of drivers for SHDI was listed as ratio of industrial area, land price, and distance to roads in descending order. Also, the interaction between slope and ratio of residential area had a great impact on LPI and SHDI. The ratio of industrial area was a single driver to most significantly explain the loss and fragmentation of urban green spaces in Daegu in the past 20 years. The interaction between slope and ratio of residential area was greater than the independent influence of a single driver. This study will provide the base data to build a sustainable urban green policy for the city of Daegu in the near future.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.361-380
• /
• 2002

The purposes of this study were to a analysis of friction relation between tennis outsole and tennis playing surfaces. Tennis footwear is an important component of tennis game equipment. It can support or damage players performance and comfort. Most importantly athletic shoes protect the foot preventing abrasions and injuries. Footwear stability in court sports like tennis is incredibly important since it is estimated that as many as 45% of all lower extremity injuries occur in the foot and ankle. The friction force is the force exerted by a surface as an object moves across it or makes an effort to move across it. The friction force opposes the motion of the object. Friction results when two surfaces are pressed together closely, causing attractive intermolecular forces between the molecules of the two different surfaces. The outsole provides traction and reduces wear on the midsole. Today's outsoles address sport specific movements (running versus pivoting) and playing surface types. Different areas of the outsole are designed for the distinct frictional needs of specific movements. Traction created by the friction between the outsole and the surface allows the shoe to grip the surface. As surfaces, conditions and player motion change, traction may need to vary. An athletic shoe needs to grip well when running but not when pivoting. Laboratory tests have demonstrated force reductions compared to impact on concrete. There is a correlation between pain, injury and surface hardness. These are a variety of traction patterns on the soles of athletic shoes. Traction like any other shoe characteristic must be commensurate and balanced with the sport. The equal and opposite force does not necessarily travel back up your leg. The surface itself absorbs a portion of the force converting it to other forms of energy. Subsequently, tennis court surfaces are rated not only for pace but also for the percentage of force reduction.

• Journal of Korea Game Society
• /
• v.15 no.5
• /
• pp.143-152
• /
• 2015

Unlike simulating general 'particle-based fluid explosion', simulating fluid with elasticity requires various experimental methods in order to show the realistic deformation of the matter. The existing studies on particle-based viscoelastic fluid only focused on matters' plastic deformation which can be found in mud or paint, based on the maximum distortion energy theory and maximum shear stress theory. However, these former researches could not simulate the brittle deformation which can be seen from silicon or highly elastic rubber when great external forces above limits are applied. This study suggests a brittle simulation method based on the Coulomb-Mohr theory, the idea that a yield occurs when maximum stress on a matter reaches to its rupture stress. This theory has a significant difference from the existing particle-based simulations which measures the forces on a matter by length or volume. Using a strong-elastic semifluid which Coulomb-Mohr theory is applied, realistic deformation process of a matter was observed as its forced surface reached to the rupture stress. When semifluid hit the ground, the impact of deformation can be explained by using Coulomb-Mohr theory.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1299-1308
• /
• 1994

This paper is considered on the dynamic behavior and the dynamic impact coefficient on the cable-stayed bridge under the vehicle load. The method of static analysis, that is, the transfer matrix method is used to get influence values about displacements, section forces of girder and cable forces. Gotten influence values were used as basic data to analyse dynamic behavior. This paper used the transfer matrix method because it is relatively simpler than the finite element method, and calculating speed of computer is very fast and the precision of computation is high. In the process of dynamic analysis, the uncoupled equation of motion is derived from simultaneous equation of the motion of cable-stayed bridge and vehicle travelling by using mode shape, which was borne from system of undamped free vibration. The solution of the uncoupled equation of motion, that is, time history of response of deflections, velocity and acceleration on reference coordinate system, is found by Newmark-${\beta}$ method, a kind of direct integral method. After the time history of dynamic response was gotten, and it was transfered to the time history of dynamic response of cable-stayed bridge by linear transformation of coordinates. As a result of this numerical analysis, effect of dynamic behavior for cable-stayed bridge under the vehicle load has varied depending on parameter of design, that is, the ratio of span, the ratio of main span length, tower height, the flexural rigidity of longitudinal girder, the flexural rigidity of tower, and the cable stiffness, investigated. Very good agreements with the existing solution in the literature are shown for the uncracked plate as well as the cracked plate.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.149-157
• /
• 2009

The purpose of this project was to determine biomechanical differences between Type A(Korean brand) and Type B(world top brand) badminton shoes and to make recommendations to improve the fit and function of Type A badminton shoes. Measurements of shoe shape and dimensions, foot movement within the shoe, cushioning of ground reaction forces, in-shoe pressure and outsole traction were performed. In addition, subjective feedback of the fit and function of the shoes was quantified for 17 recreational badminton players. Type A shoe had a much higher heel and shallower heel cup, so the heel was not secured well in the shoe and the ankle joint was higher off the ground. Foot slippage was up to 40% greater in Type A shoe than Type B shoe. Impact forces and peak pressures under the foot were generally higher with Type A shoe compared to Type B shoe. The flexion axis of Type A shoe occurred in the midfoot, not at the ball of the foot like Type B shoe, where you would want the shoe flexion to occur. In summary, there are several characteristics where A Type shoe and B Type differ. Therefore, a few recommendations are provided to help improve the fit and function of A Type shoe.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.172-178
• /
• 2020

Background and Objectives This study aimed at examining the effects of photobiomodulation therapy (PBMT) on glucose, cholesterol, triglycerides, and low- and high-density lipoprotein (LDL and HDL, respectively) levels in vitro. Materials and Methods A total of 38 serum samples collected in plain (n=10) and heparinized tubes (n=28) were subjected to PBMT at 60 Joules (J)/cm² for 2 min at 810 nm. The glucose and lipid profiles, cholesterol, triglycerides, LDL, and HDL of each sample was measured before and after PBMT. Results A statistically significant increase in glucose levels was observed in the PBMT-sera in 8 out of 10 samples in plain tubes. However, only two samples that were prepared in heparinized tubes showed an increase in glucose levels. The remaining heparinized samples that were exposed to PBMT presented lower glucose values. The treated sera exhibited a fluctuation in the lipid profiles after PBMT. However, high cholesterol levels were evident following PBMT. Similar trends with HDL and LDL in heparinized tubes were evident. Conclusion Together, the findings suggest that photobiomodulation exhibits an effect on glycemic and lipid profiles in vitro. Hence, the use of low-level laser therapy could have therapeutic potential. However, the differences between individual responses appear to indicate that the impact of PBMT may not always be beneficial.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.110-122
• /
• 2010

The emergence of the field of organizational buying behavior in the mid-1960’s with the publication of Industrial Buying and Creative Marketing (1967) set the stage for a new paradigm of thinking about how business was conducted in markets other than those serving ultimate consumers. Whether it is "industrial marketing" or "business-to-business marketing" (B-to-B), organizational buying behavior remains the core differentiating characteristic of this domain of marketing. This paper explores the impact of several dynamic factors that have influenced how organizations relate to one another in a rapidly increasing interdependence, which in turn can impact organizational buying behavior. The paper also raises the question of whether or not the major conceptual models of organizational buying behavior in an interdependent world are still relevant to guide research and managerial thinking, in this dynamic business environment. The paper is structured to explore three questions related to organizational interdependencies: 1. What are the factors and trends driving the emergence of organizational interdependencies? 2. Will the major conceptual models of organizational buying behavior that have developed over the past half century be applicable in a world of interdependent organizations? 3. What are the implications of organizational interdependencies on the research and practice of organizational buying behavior? Consideration of the factors and trends driving organizational interdependencies revealed five critical drivers in the relationships among organizations that can impact their purchasing behavior: Accelerating Globalization, Flattening Networks of Organizations, Disrupting Value Chains, Intensifying Government Involvement, and Continuously Fragmenting Customer Needs. These five interlinked drivers of interdependency and their underlying technological advances can alter the relationships within and among organizations that buy products and services to remain competitive in their markets. Viewed in the context of a customer driven marketing strategy, these forces affect three levels of strategy development: (1) evolving customer needs, (2) the resulting product/service/solution offerings to meet these needs, and (3) the organization competencies and processes required to develop and implement the offerings to meet needs. The five drivers of interdependency among organizations do not necessarily operate independently in their impact on how organizations buy. They can interact with each other and become even more potent in their impact on organizational buying behavior. For example, accelerating globalization may influence the emergence of additional networks that further disrupt traditional value chain relationships, thereby changing how organizations purchase products and services. Increased government involvement in business operations in one country may increase costs of doing business and therefore drive firms to seek low cost sources in emerging markets in other countries. This can reduce employment opportunitiesn one country and increase them in another, further accelerating the pace of globalization. The second major question in the paper is what impact these drivers of interdependencies have had on the core conceptual models of organizational buying behavior. Consider the three enduring conceptual models developed in the Industrial Buying and Creative Marketing and Organizational Buying Behavior books: the organizational buying process, the buying center, and the buying situation. A review of these core models of organizational buying behavior, as originally conceptualized, shows they are still valid and not likely to change with the increasingly intense drivers of interdependency among organizations. What will change however is the way in which buyers and sellers interact under conditions of interdependency. For example, increased interdependencies can lead to increased opportunities for collaboration as well as conflict between buying and selling organizations, thereby changing aspects of the buying process. In addition, the importance of communication processes between and among organizations will increase as the role of trust becomes an important criterion for a successful buying relationship. The third question in the paper explored consequences and implications of these interdependencies on organizational buying behavior for practice and research. The following are considered in the paper: the need to increase understanding of network influences on organizational buying behavior, the need to increase understanding of the role of trust and value among organizational participants, the need to improve understanding of how to manage organizational buying in networked environments, the need to increase understanding of customer needs in the value network, and the need to increase understanding of the impact of emerging new business models on organizational buying behavior. In many ways, these needs deriving from increased organizational interdependencies are an extension of the conceptual tradition in organizational buying behavior. In 1977, Nicosia and Wind suggested a focus on inter-organizational over intra-organizational perspectives, a trend that has received considerable momentum since the 1990's. Likewise for managers to survive in an increasingly interdependent world, they will need to better understand the complexities of how organizations relate to one another. The transition from an inter-organizational to an interdependent perspective has begun, and must continue so as to develop an improved understanding of these important relationships. A shift to such an interdependent network perspective may require many academicians and practitioners to fundamentally challenge and change the mental models underlying their business and organizational buying behavior models. The focus can no longer be only on the dyadic relations of the buying organization and the selling organization but should involve all the related members of the network, including the network of customers, developers, and other suppliers and intermediaries. Consider for example the numerous partner networks initiated by SAP which involves over 9000 companies and over a million participants. This evolving, complex, and uncertain reality of interdependencies and dynamic networks requires reconsideration of how purchase decisions are made; as a result they should be the focus of the next phase of research and theory building among academics and the focus of practical models and experiments undertaken by practitioners. The hope is that such research will take place, not in the isolation of the ivory tower, nor in the confines of the business world, but rather, by increased collaboration of academics and practitioners. In conclusion, the consideration of increased interdependence among organizations revealed the continued relevance of the fundamental models of organizational buying behavior. However to increase the value of these models in an interdependent world, academics and practitioners should improve their understanding of (1) network influences, (2) how to better manage these influences, (3) the role of trust and value among organizational participants, (4) the evolution of customer needs in the value network, and (5) the impact of emerging new business models on organizational buying behavior. To accomplish this, greater collaboration between industry and academia is needed to advance our understanding of organizational buying behavior in an interdependent world.

• International Journal of Quality Innovation
• /
• v.8 no.3
• /
• pp.81-112
• /
• 2007

In the competitive global market, firms have to keep profit from innovation activities. A firm makes profits by offering products or services at a lower cost than its competitors or by offering differentiated products at premium prices that more than compensate for the extra cost of differentiation. The IC Package and Testing technology industries were the first high technological industry to build in Taiwan. The Package and Testing industries in Taiwan adopted competitive innovation activities to become stronger. In our study, we want to know how innovation activities influence a firm operating in the IC Package and Testing industries. Our study used a questionnaire and Likert five-point scale to survey the innovation activities, customer and feedback in innovation performance in the IC Package and Testing industry. The wafer level chip size packing technology in our study indicates the innovation activities. Because we need to compare the difference between the wafer level chip size packing technology and wire bonding technology to recognize innovation and how the innovator and customer were influenced. Our conclusions are described below: (1) When the innovator adopts innovation activities that can be maintained using experiments and knowledge, using machine and decision variables more quickly will produce success; (2) Innovators should adopt innovation activities that focus on customers that use knowledge and experimentation, training time and cost. If an innovation forces customers to spend much time and cost to learn new technology or applications, the innovation will not be adopted; (3) Innovators that create innovation performance higher than his customers must also consider the impact upon their customers. We have to remind innovator to focus on why their customers have a different level of evolution in the same innovation activities.