• Elastomers and Composites
• /
• 제41권1호
• /
• pp.40-48
• /
• 2006

고무는 금속 및 플라스틱 재료와 달리 작은 하중에서도 큰 변형이 발생되며, 높은 변형 구간에서 탄성특성을 보이는 특징이 있다. 특히 충격흡수 특성이 금속 및 플라스틱보다 우수하므로 제진 및 충격 완충구조물로 널리 활용되고 있다. 충격하중을 받는 고무 구조물의 특성을 평가하기 위하여 자유 낙하형 충격시험기를 이용하여 충격실험을 실시하였으며, ABAQUS/Explicit를 이용하여 유한요소 해석을 수행하였다. 고무의 동강성은 충격펄스의 최대변형량과 충격지속시간으로부터 얻어진 진폭과 주파수를 적용하여 동특성 시험을 수행하고 WLF모델을 적용하여 높은 주파수 대역의 동강성을 예측하였다. 실험을 실시한 $0.3{\sim}l.5J$의 충격에너지 영역에서는 고무의 경도가 증가되면 충격흡수율이 감소되며, 충격에너지가 커질수록 충격흡수율은 감소하는 경향을 나타내었다.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1117-1126
• /
• 2013

The standard impact sources, standardized to rate the sound insulation performance of floor structure, should simulate well the real floor impact sources, which is very important to grade the floor structure then to establish counter plan to improve the performance of floor. Recently the tire, the standard heavyweight impact source, has been discussed that the impact force is too big to represent the real impact force. And researches have been carried on the applicability as a substitute or a supplementary. In addition, tapping machine, the standard lightweight impact source, is also questionable if it is representative of real lightweight impact source. This study aims to examine the similarity of standard impact sources with living impact sources, comparing the physical characteristics such as impact force, frequency contents and sound level. The result showed that the physical characteristics of standard impact sounds were somewhat different with that of living impact sounds, and the standard sources couldn't be verified from this result. Later subjective evaluation should be followed to compare how the physical differences make relationship with the subjective differences.

• 한국의류학회지
• /
• 제40권3호
• /
• pp.495-505
• /
• 2016

This study explores and selects an appropriate material that considers light and soft physical properties as well as activity for impact absorption pads that can be used to develop practical impact protective clothes worn during daily life by the elderly to reduce the impact of falls. Physical properties, impact absorption performance, and compression characteristics were evaluated on 5 types of foam, 2 types of 3D spacer fabric, and 3 types of polymer gel to select a material appropriate for the pad to be inserted into impact protective clothes. The evaluation of the physical properties showed that 3D spacer fabrics had lower density compared to other materials and polymer gels had the highest density. The elongation percentage was higher in foams than 3D spacer fabrics and EPDM foam had the highest elongation percentage. The impact absorption performance of honeycomb polymer gel was better than foams and 3D spacer fabrics. As a result of looking into compression energy and compression characteristics of materials, 'CR foam A' was found to absorb the largest amount of compression energy, 24.1%, among foams and polymer gels. A high energy absorption rate of 50.0% (or above) was indicated by 3D spacer fabrics; however, foams and polymer gels showed a progressive deformation of energy compression / recovery curve with 3D spacer fabrics that showed drastic deformation. Based on characteristics of materials, 'CR foam C' and EPDM with relatively high absorption performance can be used as protective pad materials among foams. Among polymer gels, 2 open-type polymer gels that have relatively low impact protective performance but a relatively lighter weight on human body (compared to closed-type) are considered appropriate protective pad materials.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.225-226
• /
• 2014

In multi-story buildings, heavy-weight floor impact noise propagates through multiple layers. In order to evaluate the influence of structural vibration and propagation, the actual twelve-story building was excited by an impact ball. Sound and vibration responses of each floor was measured using accelerometers and a microphone. Vibration characteristics and its transfer paths were different depending on the excitation floor locations due to differences in the structural characteristics. From the measurement result, transfer characteristics were quantified by statistical energy analysis. It was confirmed that the heavy-weight floor impact noise influence not only adjacent floor. The impact noise transferred and affected multiple layers.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.501-508
• /
• 2014

Floor finishing materials such as floor coverings and floor mats can reduce floor impact noise easily. When an impact was applied to the floor, its finishing material is deformed and the impact force that was applied to the concrete slab is changed. The softer finishing materials were, the more impact force decreased. An experimental study was performed using 14 PVC floor coverings and 16 floor mats to capture the characteristics of impact force and impact noise in the residential buildings. The test results show that the impact force spectrum and the floor impact noise spectrum have a linear relationship in the case of a bare concrete slab, and the characteristics of impact force reduction are the same as those of floor impact noise reduction.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.247-259
• /
• 2020

최근에는 교육 훈련에 대한 중요성이 강조되고 있는 시기이다. 그러나 4차 산업혁명 시대에 따른 코딩이나 관련 교육들이 실제적으로 어떻게 적용되고, 활용되고 있는 지에 대한 의문 또는 실제 기업과의 연관성에 대한 부분들에 문제점은 사회 현실적인 문제에 봉착하고 있는 것이다. 이에 본 연구에서는 교육 훈련특성들을 세분화시켜 개개인의 특성에 어떠한 영향을 미치는 지를 파악하고, 이를 통해 교육 결과에 어떤 영향을 미치는 지에 대해 보고자 한다. 그 결과 SW 교육 과정과 SW 교육 교수는 개인 특성 중 전공역량과 학습성과에 정(+)의 영향을 주는 것으로 나타났으며, SW 교육환경은 아무런 영향을 주지 않는 것으로 나타났다. 또한, 개인 특성은 교육 결과에 만족에는 모두 정(+)의 영향을 불만족에는 모두 부(-)의 영향을 미치는 것으로 나타났다. 이러한 결과는 SW 교육 과정과 SW 교육 교수에 대한 중요성을 강조하는 결과이며, SW 교육환경에 대한 부분에 대해 다시 한번 생각하게 하는 결과로 보여진다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.179-182
• /
• 2001

Impacter tester was build of to evaluate the characterization of non-flamable Glass/phenol laminate plates under the low velocity impact. The damage of composite laminates are matrix cracking, delamination, and fiber breakage for impact energy. In this study, this is to find impact properties of Glass/phenol in used in a forehead part of lighting subway. To determine impact damage characteristics which is made in a laminate, use the UT C-scan after- macrography. And then evaluated the reduction of strength in a rate of impact energy with CAI(Compression After Impact) test

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1142-1146
• /
• 2007

In this studies, subjective evaluation of heavy-weight floor impact sound through classification was conducted. Heavyweight impact sounds generated by an impact ball were recorded through dummy heads in apartment buildings. The recordings were classified according to the frequency characteristics of the floor impact sounds which are influenced by the floor structure with different boundary conditions and composite materials. The characteristics of the floor impact noise were investigated by paired comparison tests and semantic differential tests. Sound sources for auditory experiment were selected based on the actual noise levels with perceptual level differences. The results showed that roughness and fluctuation strength as well as loudness of the heavy-weight impact noise had a major effect on annoyance.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.311-323
• /
• 2004

This paper is to study the energy absorption characteristics of CF/Epoxy(Carbon Fiber/Epoxy Resin) laminated shell with the various curvatures subjected to transverse impact loadings under the low impact velocity in consideration of design of structural members for use of transportation machine, which are consisted of the characteristics of high stiffness, strength and lightweight. The curvature radius are associated with the energy absorption characteristics of CF/Epoxy laminated shell which is brittleness material. In all tests, maximum load of CF/Epoxy laminated plate is higher than that of laminated shell with curvature, but maximum deflection is lower. And then absorbed energy of laminated shell with curvature is higher than laminated plate(curvature radius is unlimited), As curvature radius is increased, the absorbed energy is increased in laminated shell with curvature.