• Korean Journal of Child Studies
• /
• v.36 no.4
• /
• pp.209-227
• /
• 2015

The present study investigated maternal parenting stress trajectories, using data gathered from the Korean Children Panel Survey. Four factors-monthly income, maternal depression levels, infants' negative emotionality, marital conflict-which were taken from reports made by the mothers' used in this study, were examined as predictors of maternal parenting stress trajectories. The effects of maternal parenting stress trajectories, parenting styles and toddlers' peer interruptive behaviors were also examined. The findings were as follows: First, maternal parenting stress trajectories somewhat increased from the 1st year period to the 4th year period. Second, infants' negative emotionality and marital conflict within the first year were observed to have a connection to the initial level and slope of maternal parenting stress trajectories. Third, maternal parenting stress trajectories predicted positive parenting styles, and parenting styles had a longitudinal impact on toddlers' peer interruptive behaviors at the 5th year period.

• ALGAE
• /
• v.36 no.1
• /
• pp.51-60
• /
• 2021

The sea urchin, Mesocentrotus nudus, is widely distributed in North West Pacific regions. It has a substantial impact on macroalgal communities as a generalist herbivore. This study examined various aspects of its feeding ecology, including algal preference, foraging behaviors, and possible effects of past feeding history on its algal preference. We used six common algal species (Ulva australis, Undaria pinnatifida, Sargassum confusum, Dictyopteris divaricata, Grateloupia elliptica, and Grateloupia angusta) from the east coast of Korea as food choice in a series of indoor aquarium experiments. The first choice of starved M. nudus was exclusively U. pinnatifida, followed by G. elliptica and S. confusum. Unlike large urchins, small urchins equally preferred U. pinnatifida and G. elliptica. On the other hand, Undaria-fed urchins preferred to feed only G. elliptica, although its preference slightly differed over time. We then grouped sea urchins into three categories (starved, Undaria-fed, mixed species-fed) to observe 12-days feeding preference as well as early foraging movements. Foraging behaviors of the three groups were distinctively different, although they could not completely reflect the actual consumption. For example, U. australis was highly attractive, but rarely eaten. Undaria-fed urchins seemed to stay with only S. confusum and U. australis. This study demonstrates that M. nudus shows high flexibility in food preference depending on past feeding history and body size. Its foraging behaviors are also affected by past feeding conditions, exhibiting active chemoreceptive movements.

• Safety and Health at Work
• /
• v.13 no.4
• /
• pp.469-474
• /
• 2022

Background: Nowadays, counter-productive work behaviors (CWBs) have turned into a common and costly position for many organizations and especially health centers. Therefore, the study was carried out to examine and compare the demand-control-support (DCS) and effort-reward imbalance (ERI) models as predictors of CWBs. Methods: The study was cross-sectional. The population was all nurses working in public hospitals in Hamadan, Iran of whom 320 were selected as the sample based on simple random sampling method. The instruments used were Job Content Questionnaire, Effort-Reward Imbalance Questionnaire, and Counterproductivity Work Behavior Questionnaire. Data were analyzed using correlation and regression analysis in SPSS18. Results: The findings indicated that both ERI and DCS models could predict CWB (p ≤ 0.05); however, the DCS model variables can explain the variance of CWB-I and CWB-O approximately 8% more than the ERI model variables and have more power in predicting these behaviors in the nursing community. Conclusion: According to the results, job stress is a key factor in the incidence of CWBs among nurses. Considering the importance and impact of each component of ERI and DCS models in the occurrence of CWBs, corrective actions can be taken to reduce their incidence in nurses.

• The Korean Journal of Franchise Management
• /
• v.8 no.4
• /
• pp.33-43
• /
• 2017

Purpose - Previous studies about corporate image generally explore how corporate image affects a company's effectiveness from the consumer view. However this study attempts to explore the impacts of corporate image (reliability, friendly, corporate social responsibility, and innovation) on employees' altruistic behaviors in the franchise industry context. This study also examine whether organizational trust and affective commitment play a mediating role in the relationship between corporate image and employees' altruistic behaviors. The authors developed several hypotheses to achieve these purposes. Research design, data, and methodology - The data were collected from employees in food-service franchise companies located in Seoul, Korea. Among a total of 363 questionnaires distributed, 294(response rate of 81%) questionnaires were returned. After excluding 18 invalid respondent questionnaires, 276 valid questionnaires(response rate of 76%) were coded and analyzed using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 21 and SmartPLS 3.0. Result - The findings of the study are as follows: First, friendly, CSR, and innovation had positive effects on organizational trust, but reliability did not have a significant effect on organizational trust. Second, reliability and friendly of corporate image had positive effects on affective commitment, but CSR and innovation did have a significant effect on affective commitment. Third, organizational trust and affective commitment had positive effects on employees' altruistic behaviors. Conclusions - The aim of this study is to investigate the franchise corporate image as a significant influencing factor of employees' altruistic behaviors. The data were collected from only employees from franchising companies. The findings might vary from position to position. Future studies need to collect and compare data from managers. Future studies need to consider other variables that affect employees' altruistic behaviors. For example, leadership and market orientation might influence employees' attitude and behaviors. Also, future research should include other variables and it may have limitations in sample representative because of sampling franchise corporate in Seoul. Future studies will include franchise corporate all over the country. Future studies can also consider other variables (e.g., job performance and turnover intentions) to measure employee performance at the level of individuals and identify the impact of employee performance on business performance at the level of corporate.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.183-192
• /
• 2011

The demand for weight saving and high performance of aircraft require the more uses of composite materials. However the complicate behaviors and various failure characteristics restrict usage of composite materials. Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden and cannot be detected by visual inspection. Especially, the reduction on compressive strength after impact is influenced by the ply delaminations introduced as damage by impact event. In this research, the numerical analysis was performed to investigate impact damage and compressive strength after impact. It was found that impact force history and compressive strength after impact calculated by the numerical analysis were compared and shown a good agreement with experimental results.

• Journal of the Korean Institute of Gas
• /
• v.12 no.4
• /
• pp.41-45
• /
• 2008

This paper presents the numerical study on the strength safety and displacement behaviors of a helmet, which is to protect impact forces and to absorb the impact energy. Four different helmet models including a bead frame and a corrugation damper have been analyzed for the stress and the displacement characteristics by using the finite element method. The computed FEM results show that the bead frame on the summit area of the helmet is very useful to increase the strength safety of the helmet, and the corrugation damper on the lower part of the helmet may increase the energy absorption capacity. Thus, this paper recommends the bead frame and the corrugation damper as new design elements of the helmets.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.7
• /
• pp.31-38
• /
• 2017

Purpose - This study aims to elucidate the status of women as consumers and observe their consumption trends in relation to culture. Research design, data, and methodology - Past studies of women as consumers were observed and their consumer behaviors were noted. The stigma of women in society and how it has impacted the market industries were examined. Additionally, the role of culture in consumerism for women were also reviewed and elucidated. Results - The stereotypical roles that are placed in women in society are still prevalent for the marketing industry and is reflected in their businesses. Additionally, the role of culture plays a significant role in the consumer behaviors of women and thus businesses should understand its intricate differences between countries. Fashion industry is one that plays a prominent role in women's consumerism and the impact of culture has a prominent impact on women's consumer habits as well. Conclusions - Additional studies should be conducted to understand the consumerisms of women in the marketing industry. Businesses should also be aware of the vastly different cultural norms of various countries and tailor to their preferences. Only through a thorough examination and understanding of the consumer behavior in women will markets be able to flourish and gain solid ground in global businesses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.784-789
• /
• 2001

In order to investigate the fracture behaviors(penetration modes) and the resistance to penetration during ballistic impact of cold-rolled Al 5052 H34 alloy laminates, anodized Al 5052 H34 alloy laminates, and Al 5052 H34 alloy after cold-rolling, ballistic testing was conducted. In general, superior armor material is brittle materials which have a high hardness. Ballistic resistance of these materials was measured by protection ballistic limit(V50), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V50 test and Projectile Through Plate(PTP) test at velocities greater than V50. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature using 5.56mm ball projectile. V50 tests with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface Hardness, resistance to penetration, and penetration modes of Al 5052 H34 alloy laminates compared to those of cold-rolled Al 5052 H34 alloy laminates and anodized Al 5052 H34 alloy laminates anodized Al 5052 H34 alloy after cold-rolling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1686-1694
• /
• 2003

The foam-filled tube beams can be used for the front rail and firewall structures to absorb impact energy during frontal or side collision of vehicles. In the case of side collision where bending is involved in the crushing mechanism, the foam filler would be effective in maintaining progressive crushing of the thin-walled structures so that much impact energy could be absorbed. In this study, bending behaviors of the closed-cell-aluminum-alloy-foam-filled stainless steel tube were investigated. The various foam-filled specimens including piecewise fillers were prepared and tested. The aluminum-alloy-foam filling offered the significant increase of bending resistance. Their suppression of the inward fold formation at the compression flange as well as the multiple propagating folds led to the increase of load carrying capacity of specimens. Moreover, the piecewise foams would provide the easier way to fill the thin-walled shell structures without the drawback of strength.

• Journal of Community Nutrition
• /
• v.5 no.4
• /
• pp.230-238
• /
• 2003

Television is a powerful and persuasive teacher. It has the potential to influence perceptions, knowledge, beliefs, and behaviors, thus nutritionists need to be aware of the nutrition-related information (NRI) in television programming and the effect this information has on viewers. The purpose of this article was to review research published in peer-reviewed journals between 1988 and 2003 that examined the NRI embedded in American television programming, which is exported to over 125 nations, and its impact on nutrition knowledge, attitudes, and/or behaviors. This review revealed that, for the past 15 years, NRI was commonly included in both television advertisements and shows. Advertised foods were mainly high in fat, sodium, and/or sugar. In addition, the NRI embedded in food advertisements tended to be misleading or inaccurate. Prime-time television shows included numerous NRI containing scenes every hour, with situation comedies having the most and real-life re-enactment shows the least. Overall, low nutrient density foods accounted for approximately 40 percent or more of all food references on prime-time television shows. In television shows, foods were mostly consumed as snacks rather than meals and children often ate more nutritious foods than adults. Although relatively few studies have examined the impact of television programming on viewers, those that do exist indicate that as children watch more television, nutrition knowledge and understanding declines while misconceptions about nutrition increase. Advertising influences children's food purchase requests and subsequent purchases by adults, with the most requested and purchased foods being high in sugar, fat, and/or salt foods. Existing research indicates that television must be acknowledged as a major source of NRI and a potentially powerful influence on dietary practices.