• KSBB Journal
• /
• 제13권4호
• /
• pp.411-417
• /
• 1998

The possibility of application of membrane type immobilized adsorbent to the fed-batch or perfusion culture system with anchorage-independent cells as well as batch system was investigated. The improvement in cell density and cell viability due to the combination of immobilized adsorbent with each culture system was evaluated for the investigation, and the optimum culture system employing immobilized adsorbent system was suggested based on the results. It was observed that the system with immobilized adsorbent showed better cell growth and cell viability than that without immobilized adsorbent in every operation system of batch, fed-batch, and perfusion. In case of batch system, 200% improvement of maximum cell density was observed in the system where ammonium chloride was added on purpose. And 50% improvement of maximum cell density was observed in the fed-batch system where ammonium ion accumulates significantly, while small increase in maximum cell density was observed in the perfusion system where dilution of waste byproducts exists. Especially, the fed-batch system showed the most significant improvement on cell growth because both compensation of nutrient and removal of ammonium ion occurred simultaneously in the system. Therefore a combined system of immobilized adsorbent and fed-batch operation could be suggested as an optimum system with in situ removal of ammonium ion.

• KSBB Journal
• /
• 제13권4호
• /
• pp.404-410
• /
• 1998

CHO 세포외 성장 및 생산성을 저해하는 엄포늄 이온의 동시 제거를 위해 PhJlhpsite~Gismondine 합성 zeolite가 alginate, cellulose acetate. dialysis membrane에 고정화된 흡착제가 개발되었다. 고정화 흡착체에 의한 암모늄 이온의 제거 효율 및 비에 따른 세표성장의 증진효과를 비교한 결과 최적의 고정화 흡착제로 membrane type이 선정되었다. 암모늄 이온의 제거 효파를 더욱더 명확하게 하고 고멸도의 세포 배양을 모사하가 위하여 8mM의 ammonium chloride를 첨가하고 membrane type 고정화 흡착제를 투여하여 암모늄 이온의 동시제거 효과를 조사한 결과 최대 세포 농도가 3배 이상 증가하였으며 생존율 역시 증가하였고 40%정도의 tPA 생산성 향상올 보여 주었다­. 이러한 증진 효과는 암모늄 이온의 고농도 시스템일수록 커졌다. 고정화 흡착제의 최적 투며 시기를 조사해본 결과 ammonium chlonde를 첨가하지 않았을 때 membrane type 고 정화 흡착제의 최적 투여 시기는 배양 시작 후 48시간이었고, 8mM의 ammonium chloride를 침가한 경우의 최적 투여 시기는 배양 시작 후 72시간이었다.

• KSBB Journal
• /
• 제11권3호
• /
• pp.329-339
• /
• 1996

The effects of ammonium ion on cell growth kinetics, monoclonal antibody productivity, and cell metabolism of hybridoma cells were investigated. The mouse-mouse hybridoma cell line VlIIH-8 producing mouse IgG2a was used as a model system. Ammonium ion showed an inhibitory effect on cell growth and monoclonal antibody production. New immobilized adsorbents were developed for the reduction of the inhibitory effect of ammonium ion. The ammonium ion selective zeolite, Phillipsite-Gismondine was entrapped in calcium alginate bead or in dialysis membrane and applied to the hybridoma cell culture system for the in situ removal of ammonium ion from culture media. The effects of ammonium the both serum supplemented and serum free media on the cell growth were studied by applying immobilized adsorbents of calcium alginate bead type. The results demonstrated a substantial enhancement in cell growth. Applying immobilized adsorbents of dialysis membrane type to serum supplemented media also resulted in the stimulation of cell growth, cell viability and monoclonal antibody production.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.172-177
• /
• 2017

A novel biosorbent, immobilized Saccharomyces cerevisiae in magnetic chitosan microspheres was prepared, characterized, and used for the removal of $Sr^{2+}$ from aqueous solution. The structure and morphology of immobilized S. cerevisiae before and after $Sr^{2+}$adsorption were observed using scanning electron microscopy with energy dispersive X-ray spectroscopy. The experimental results showed that the Langmuir and Freundlich isotherm models could be used to describe the $Sr^{2+}$ adsorption onto immobilized S. cerevisiae microspheres. The maximal adsorption capacity ($q_m$) was calculated to be 81.96 mg/g by the Langmuir model. Immobilized S. cerevisiae was an effective adsorbent for the $Sr^{2+}$ removal from aqueous solution.

• 미생물과산업
• /
• 제19권4호
• /
• pp.2-13
• /
• 1993

Some microorganisms, including actinomycetes, cyanobacteria, and other bacteria, algae, fungi, and yeast, can accumulate and retain relatively high quantities of heavy metals and radionuclides from their external environments (1-4). Both living and dead cells can be used for biosorptive metal/radionuclide removal from solution. Thus microorganisms and products excreted by or derived from microbial cells (2) may provide an alternative or adjunct to conventional techniuqes of metal removal and recovery. Recent approaches have separated the microbial growth and metal removal process to manipulate production of metal-adsorptive capacity of bacteria and metal removal process. If pre-grown cells are immobilized and used for metal removal, mathematical modeling can be applied to predict immobilized cell reactor behavior under specific process conditions. Waste and microbial adsorbent could be separated from the treated flow in one step. Once treated, the metal waste is concentrated in a small volume of sorbed form for easy metal disposal or recovery.

• 환경위생공학
• /
• 제14권1호
• /
• pp.80-87
• /
• 1999

According to the fact that algae, which is usually used as a biosorbent, contains chlorophyll, we used the chlorophyll as an adsorbent. In this study, chlorophyll is immobilized by agar, which was made of platan, oak, ginkgo and pine. We investigated the removing capacity of biosorbents to toxic heavy metals (Pb, CU, Cd, Zn) in the single ion solution. Then the experimental parameters were pH, reaction time and concentration of heavy metal ions.The optimum conditions for the adsorption of heavy metals were as follows : pH range was 4~5, reaction time was 40mon, and the highest ratio of the removing rate was 50~70 ppm. The order of the amount of Pb, Cu and Cd removed was specified as oak > ginkgo > pine > platan in these conditions and as pine > ginkgo > oak > platan at Zn. Fro the results of the desorption experiments, we found that the heavy metal with the highest ratio of desorption in the single ion adsorbent was Cu.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.1-14
• /
• 2017

본 연구에서는 고염/고방사성 폐액 내 함유된 주요 고방사성핵종인 Cs 제거를 목적으로 고효율의 복합 흡착제(potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) 합성 및 이의 적용성을 평가하였다. 복합 흡착제는 Cs을 비롯한 다른 입자를 수용할 수 있는 CHA를 지지체로 선정하였으며, $CoCl_2$ 및 $K_4Fe(CN)_6$ 용액의 단계적인 함침/침전을 통해 PCFC를 CHA 세공 내에 고정화함으로써 합성하였다. 복합 흡착제의 합성 시 평균 입자크기가 $10{\mu}m$ 이상의 CHA를 지지체로 사용할 경우, PCFC 입자는 안정적인 형태로 고정화되었다. 또한, 합성 시 복합 흡착제의 정제를 증가시키는 세척 방법을 최적화함으로써, 복합 흡착제의 물리적 안정성이 향상되었다. 최적의 합성법을 통해 얻은 복합 흡착제에 의한 Cs 흡착 시, 담수(무염조건) 및 해수(고염 조건)에서 모두 빠른 흡착 속도를 보였으며, 염 농도와 무관하게 비교적 높은 분배계수 값($10^4mL{\cdot}g^{-1}$ 이상)을 나타내었다. 그러므로, 본 연구에서 합성한 복합 흡착제는 CHA 및 PCFC가 각각 가지고 있는 물리적 안정성과 Cs에 높은 선택성 등을 고려하여 촤적화한 소재이며, 고염/고방사성폐액에 함유되어 있는 Cs을 고효율로 신속하게 제거할 수 있음을 알 수 있다.

• 한국환경과학회지
• /
• 제27권12호
• /
• pp.1215-1226
• /
• 2018

In this study, PAN-SZ (polyacrylonitrile scoria zeolite) beads were prepared by immobilizing Na-A zeolite (SZ-A) synthesized from Jeju volcanic rocks (scoria) on the polymer PAN. FT-IR and TGA analysis results confirmed that the SZ-A was immobilized in the PAN-SZ beads. SEM images showed that the PAN-SZ beads are a spherical shape with 2 mm diameter and exhibit a porous inner structure inside the bead. The most suitable mixing ratio of PAN to SZ-A as the adsorbent for removing Sr ions was PAN/SZ-A = 0.2 g/0.3 g. The adsorption kinetic data for Cu and Sr ions were fitted well with the pseudo-second-order model. The Cu and Sr ion uptakes followed a Langmuir isotherm model and the maximum adsorption capacities at $20^{\circ}C$ were 84.03 mg/g and 75.19 mg/g, respectively. The amount of Sr ion adsorbed by SZ-A on the PAN-SZ beads was about 160 mg/g, which was similar to that adsorbed by SZ-A powder. Thus, the PAN-SZ beads prepared in this study are considered to be effective adsorbents for removing metal ions in aqueous solutions.

• 한국식품과학회지
• /
• 제17권2호
• /
• pp.75-80
• /
• 1985

Lipase를 유지분해에 이용하기 위한 기초연구로서 Candida cylindracea에서 추출된 lipase를 흡착법에 의해 고정화하고 그의 반응특이성을 본 결과는 다음과 같다. Lipase 흡착에 적합한 흡착제로는 silica gel이 선정되었으며, Silica gel 1.6g에 lipase 47.5 units를 $5^{\circ}C$, PH 7.0에서 100분간 흡착시키는 것이 좋았다. Silica gel에 고정화 시킨 lipase를 유지방과 olive oil의 분해에 적합한 최적온도 및 최적pH는 가용성효소와 비교시 $37^{\circ}C$, pH 7.0으로 변하지는 않았으나 활성의 범위는 넓어졌다. 또한 열안정성 및 pH안정성도 가용성 효소에 비하여 활성의 범위가 넓어졌다. 유지의 분해에 적합한 고정화 효소의 최적효소농도는 유지방의 경우 30g이었으며 올리브유의 경우 80g으로 선정하였다. 이 때 최적기질농도는 유지방 및 올리브유 모두 20%였다. 반응시간에 따른 반응률은 유지방을 이용하여 조사한 결과 가용성 효소는 반응 4시간까지는 급격한 분해를 나타냈으나 고정화 효소는 8시간 까지 급격한 증가를 나타내고 그 이상은 거의 일정하였다. 또한 유리되는 지방산의 profile은 가용성 효소와 비교시 capric acid의 생성은 모두 높았으며, myristic acid의 함량은 높고 butyic acid의 함량은 적었다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.641-646
• /
• 2015

In order to recover lithium ions from aqueous solution, a novel SAN-LMO beads were prepared by immobilizing lithium manganese oxide (LMO) with styrene acrylonitrile copolymers (SAN). The optimum condition for synthesis of SAN-LMO beads was 5 g of LMO and 3 g of SAN content. The characterization of the prepared SAN-LMO beads by SEM and XRD were confirmed that LMO was immobilized in SAN-LMO beads. The removal and the distribution coefficient of lithium ions decreased with increasing lithium ion concentration and solution pH. Even when the prepared SAN-LMO beads were reused 5 times, the leakage of LMO and the damage of SAN-LMO beads was not observed.