• Journal of Korean Neurosurgical Society
• /
• 제53권1호
• /
• pp.46-48
• /
• 2013

Chondrosarcoma is a very uncommon malignant primary bone tumor, especially, it occurs extremely rare in the spine. A 52-year-old man was admitted to the emergency room with sudden paraplegia. Twelve hours prior to a paraplegic event, he visited an outpatient clinic with discomfort and tenderness around the medial border of the right scapular, and his neurologic status was absolutely intact. Magnetic resonance imaging showed a lobulated soft tissue mass from T3 to T5, which extended to the epidural space. Computed tomography scans showed soft tissue mass on the spinal posterior arch and osteolytic change of the adjacent bony structures. Emergent surgery was performed and the lesion was removed. Dark reddish blood and gel-like material were encountered around the dura and posterior arch during the operation. Multiple pulmonary nodules were found on a chest CT scan and a biopsy of one of them had been proven to be a metastasis of chondrosarcoma. The histologic examination showed dedifferentiated chondrosarcoma. The patient's neurologic deficit was improved slowly from ASIA A to ASIA D. Chondrosarcoma in the spine is extremely rare, even more with acute hemorrhage and sudden expansion into the epidural space. We named it chondrosarcoma apoplexy. We should consider the possibility of a hemorrhagic event when the patient's neurologic deficit worsens suddenly with spinal bone tumor.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2445-2448
• /
• 2007

Self-assembled monolayers (SAMs) were formed by adsorption of thioacetyl-terminated tolanethioacetate (TTA) on Au(111) in a 0.5-mM ethanol solution after one day immersion at room temperature. Molecular-scale STM imaging revealed that the TTA SAMs were composed of two mixed phases; an ordered phase with small domains describing a ( × 2 )R30° structure and a disordered phase. Interestingly, after annealing the precovered TTA SAMs on Au(111) at 90 °C for 1 h, the small ordered domains grew unidirectionally, resulting in the formation of unique rod-like domains, which were assigned a ( × 2 )R7° structure. These results will be very useful in understanding the formation and thermal behavior of TTA SAMs on gold surfaces.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 제16회 정기총회 및 동계학술발표회
• /
• pp.264-265
• /
• 2005

In this paper the conceptual design and development of a compact vertical type soft x-ray microscope is described. This x-ray microscope operates in the water window wavelength region(2.3 ${\sim}$ 4.4nm), where natural contrast between carbon(protein) and oxygen(water) allows imaging of unstained biological material their natural, hydrated environment. Until now, operational x-ray microscopes are based on synchrotron radiation sources, which limit their accessibility. Many biologists would benefit from having the x-ray microscope as a tool among other tools in their own laboratory, For this purpose we introduced the compact vertical type soft X-ray microscope with 50 nm resolution for biomedical application. The compact vertical type soft x-ray microscope is based on a laser plasma x-ray source, doubled ellipsoidal condenser reflective optics, diffractive zone plate optics and MCP coupled with CCD to record an x-ray image.

• Journal of Radiation Protection and Research
• /
• 제45권1호
• /
• pp.35-44
• /
• 2020

Background: Cadmium zinc telluride (CZT) is a promising material because of a high detection efficiency, good energy resolution, and operability at room temperature. However, the cost of CZT dramatically increases as its size increases. In this study, to achieve a large effective volume with relatively low cost, an array structure comprised of individual virtual Frisch-grid CZT detectors was proposed. Materials and Methods: The prototype consisted of 2 × 2 CZTs, a holder, anode and cathode printed circuit boards (PCBs), and an application-specific integrated circuit (ASIC). CZTs were used and the non-contacting shielding electrode method was applied for virtual Frisch-grid effect. An ASIC was used, and the holder and the PCBs were fabricated. In the current system, because the CZTs formed a common cathode, a total of 5 channels were assigned for data processing. Results and Discussion: An experiment using ¹³⁷Cs at room temperature was conducted for 10 minutes. Energy and timing information was acquired and the depth of interaction was calculated by the timing difference between the signals of both electrodes. Based on obtained three-dimensional position information, the energy correction was carried out, and as a result the energy spectra showed the improvements. In addition, a Compton image was reconstructed using the iterative method. Conclusion: The virtual Frisch-grid CZT detector based on the array structure was developed and the energy spectra and the Compton image were successfully acquired.

• 천문학논총
• /
• 제22권3호
• /
• pp.55-61
• /
• 2007

The KASINICS (Korea Astronomy and Space science Institute Near Infrared Camera System) is a ground-based near-infrared (NIR) imaging instrument. KASINICS has offner relay optics to reduce unwanted infrared light. For the offner optics, we adopted an ultra precision machining process which is installed at KBSI (Korea Basics Science research Institute). Since the offner relay optics is made of aluminum 6061 metal material, we did several tests to reach the specification. We found that a 0.497mm radius nose bite and 220m/min machining speed are best tool and condition to make this offner optics with the precision machine. In this paper, we report the technical method of ultra precision machining and results of the KASINICS offner optics.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.132-136
• /
• 2003

A Multi-Spectral Camera (MSC) is the payload of KOMPSAT-2 which is designed for earth imaging in visible and near-Infrared region on a sun-synchronous orbit. The telescope in the MSC is a Ritchey-Chretien type with large aperture. The telescope structure should be well stabilized and the optical alignment should be kept steady so that best images can be achieved. However, the MSC is exposed to adverse thermal environment on the orbit which can give impacts on optical performance. Metering structure which is exposed to adverse space environment should have tight requirement of low thermal expansion and hygroscopic stability. In order to meet those stability requirements in addition to fundamental structural ones telescope structure was designed with newly developed graphite-cyanate composite which has high tensile modulus, high thermal conductivity and low moisture absorption compared with conventional graphite-epoxy composite. In this paper, space-borne telescope structure with new composite material will be presented and fulfillment of stability requirements will be verified with designed structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.438-444
• /
• 2003

A new method to measure residual stress in micron and nano scale films is described. In the theory it is based on Linear Elastic Fracture Mechanics. And in the techniques it depends on the combined capability of the focused ion beam (FIB) imaging system and of high-resolution digital image correlation (DIC) software. The method can be used for any film material (whether amorphous or crystalline) without thinning the substrate. In the method, a region of the film surface is highlighted and scanning electron images of that region taken before and after a long slot, depth a, is introduced using the FIB. The DIC software evaluates the displacement of the surface normal to the slot due to the stress relaxation by using features on the film surface. To minimize the influence of signal noise and rigid body movement, not a few, but all of the measure displacements are used for determining the real residual stress. The accuracy of the method has been assessed by performing measurements on a nano film of diamond like carbon (DLC) on glass substrate and on micro film of aluminum oxide thermally grown on Fecrally substrate. It is shown that the new method determines the residual stress ${\sigma}_R=-1.73$ GPa for DLC and ${\sigma}_R=-5.45$ GPa for the aluminum oxide, which agree quite well with ones measured independently.

• 대한임상독성학회지
• /
• 제3권1호
• /
• pp.48-51
• /
• 2005

Diagostic imaging can help in management of toxicologic emergencies. We report a patient who presented to the emergency department with coma and suppressed respiration after ingestion of unknown substance. We documented chloroform with radiopaque material in bowel on abdominal radiograph. We used activated charcoal and laxative to decontaminate bowel. Hepatotoxicity occurred on 3rd admission day and elevation of liver enzyme reached peak level on 5th admission day. The patient received hemoperfusion, N-acetylsystein and supportive cares. The patient was improved from hepatic dysfunction and discharged without complication on 11th admission day. Radiograph in toxicology may confirm a diagnosis and assist in therapeutic intervention.

• 대한두개안면성형외과학회지
• /
• 제18권2호
• /
• pp.132-136
• /
• 2017

Frey's syndrome and infra-auricular depressed deformities are the ones of the most common complications that can occur after total parotidectomy. We report 1 case of pleomorphic adenoma occurred in the deep lobe that obtained good results from using acellular dermal matrix (ADM) after total parotidectomy. A 24-year-old man visited the hospital with oval shape mass in right mandibular angle which of 4 cm in size was found in the deep lobe of right parotid gland from Magnetic resonance imaging scanning and a pleomorphic adenoma was suspected. A total parotidectomy was performed while preserving the facial nerve. The material known as ADM were placed in the depressed part from where the mass was removed, and the site was sutured. The surgery site was healed well without any complications such as Frey's syndrome or infra-auricular depressed deformities. The pathological result was confirmed as pleomorphic adenoma. In addition to these advantages, it does not have little potential of deformation by the gravity after the surgery, and there is no restraint on circulation, which makes fabrication free and each deformation into various shapes can be described as another advantage of the reconstruction using the ADM.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.402.1-402.1
• /
• 2014

Photonic force microscopy (PFM) is an optical tweezers-based scanning probe microscopy, which measures the forces in the range of fN to pN. The low stiffness leads proper to measure single molecular interaction. We introduce a novel photonic force microscopy to stably map various chemical properties as well as topographic information, utilizing weak molecular bond between probe and object's surface. First, we installed stable optical tweezers instrument, where an IR laser with 1064 nm wavelength was used as trapping source to reduce damage to biological sample. To manipulate trapped material, electric driven two-axis mirrors were used for x, y directional probe scanning and a piezo stage for z directional probe scanning. For resolution test, probe scans with vertical direction repeatedly at the same lateral position, where the vertical resolution is ~25 nm. To obtain the topography of surface which is etched glass, trapped bead scans 3-dimensionally and measures the contact position in each cycle. To acquire the chemical mapping, we design the DNA oligonucleotide pairs combining as a zipping structure, where one is attached at the surface of bead and other is arranged on surface. We measured the rupture force of molecular bonding to investigate chemical properties on the surface with various loading rate. We expect this system can realize a high-resolution multi-functional imaging technique able to acquire topographic map of objects and to distinguish difference of chemical properties between these objects simultaneously.