• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.460-462
• /
• 2001

We have analyzed the characteristics of IR lens mounting with elastomer and applied the results to the mounting of a silicon lens with diameter 117 mm which is the objective of a thermal imaging system. The elastomer, the 577 primerless silicone adhesive (Dow Corning Co.) which is heat cure type, and the mount material, A16061 are used for our analysis. Theoretical analysis gives the result that the space between lens and mount is required to be more than 250 ${\mu}{\textrm}{m}$ under the operational temperature conditions of -40~+6$0^{\circ}C$.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.4
• /
• pp.770-783
• /
• 2015

Lately, high production rate welding processes for Al alloys, which are used as LNG FPSO cargo containment system material, have been developed to overcome the limit of installation and high rework rates. In particular, plasma-metal inert gas (MIG) hybrid (PMH) welding can be used to obtain a higher deposition rate and lower porosity, while facilitating a cleaning effect by preheating and post heating the wire and the base metal. However, an asymmetric undercut and a black-colored deposit are created on the surface of PMH weld in Al alloys. For controlling the surface defect formation, the wire feeding speed and nozzle diameter in the PMH weld was investigated through arc phenomena with high-speed imaging and metallurgical analysis.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.274-280
• /
• 2006

The study is to analyze dynamo test results for various commercial pads in order to verify the performance of brake disk with CV-NCM cast iron. The developed brake disk will apply to 200 km/h tilting trains that is being developed as one part of project for speed-up on Korean existing railroad. The test program is made out suitably for braking condition and performance of test equipment by referring UIC 541-3. Two kinds of resin pad and one kind of foreign sintered pad suitable for 200 km/h trains are used as various commercial pad for the dynamo test. The data aquisition for the maximum and smallest temperature, hot spot, etc. on disk and pad is performed by using the thermocouples and thermal imaging cameras. From this research, we obtained braking characteristics between CV-NCM cast iron disk and pad of various material and will be utilized usefully as basis data of performance optimization of developing sintered pad.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.9 no.1
• /
• pp.27-44
• /
• 1991

In this research, double-layered photoconductor consist of the carrier generation layer(CGL) of ${\varepsilon}$ type copper phthalocyanine thin film by an aqueous coating method and the carrier transport layer(CGL) of polyvinyl carbazol(PVK) by spin coating. We inverstigated effect of the surfactant solution and cathod electrolysis to the crystal type of ${\varepsilon}$-CuPc in CGL with TEM, SEM and X-ray diffraction spectroscopy and studied the mechanism of an aqueous coating for the preparation of CGL. The effect of the washing of CGL about the electrophotographic characteristics of the ${\varepsilon}$-CUPC/PVK double-layered photoconductors is studied also.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.13-27
• /
• 2000

The UV curing industry is one of the most wide application fields in the coating and printing inks industry. Applications extend to general coating for paper, board, wood tapes, compact discs and holograms, ink, photoresists for imaging processes and adhesives for welding and sealing in circuit boards. The UV-curing resins have advantages of quick set, space saving, clean environment and efficient use of energy. The purpose of this study has been to control of morphology structures consist of UV-curing resins and alkyd resins. Therefore, we are investigated with regard to rheology properties on the exposure to UV-curing, structures and mechanical properties for curing films.

• Ocean and Polar Research
• /
• v.43 no.3
• /
• pp.165-178
• /
• 2021

Gadolinium (Gd), one of a rare earth element (REE), has been widely used worldwide since the 1980s, as a resource material for contrast agents injected into examiners of magnetic resonance imaging (MRI) test. The organic complexed form of Gd shows an extremely stable behavior in natural environment (water), so is known that the artificial Gd from medical uses is not removed from the waste water treatment plant (WWTP) and eventually introduced into the ocean through the estuary. Since the 1990s, some previous studies have often been conducted on Gd anomalies in natural water and their effects an artificial origin from land or metropolitan areas, but little research has been potential impacts on the ocean water. In this paper, we review and introduce recent studies related to Gd anomaly in natural water and related marine effects, and also propose the future research directions.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1327-1332
• /
• 2018

In this study, a novel approach to the explosive synthesis of titanium carbide (TiC) is discussed. Nonstoichiometric $TiC_x$ powder was produced via the underwater explosion of a Ti powder encapsulated within a spherical explosive charge. The explosion process, bubble formation, and synthesis process were visualized using high-speed camera imaging. It was concluded that synthesis occurred within the detonation gas during the first expansion/contraction cycle of the bubble, which was accompanied by a strong emission of light. The recovered powders were studied using scanning electron microscopy and X-ray diffraction. Submicron particles were generated during the explosion. An increase in the carbon content of the starting powder resulted in an increase in the carbon content of the final product. No oxide byproducts were observed within the recovered powders.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.47-48
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, inverse scattering solution based on 2-dimensional EM scattering problem should be considered and formulated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.51-52
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, we considered 2-dimensional EM scattering problem. Radiation pattern in far field is estimated by using some measured information obtained from near-field solutions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.59-60
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, we considered 2-dimensional EM scattering problem. Incident wave source is estimated by using some measured information obtained from near-field solutions.