• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.491-498
• /
• 2019

This study analyzed how the accuracy of co-registration varies depending on the convergence angles between two KOMPSAT-3·3A images. Most very-high-resolution satellite images provide initial coordinate information through metadata. Since the search area for performing image co-registration can be reduced by using the initial coordinate information, in this study, the mutual information method showing high matching reliability in the small search area is used. Initial coarse co-registration was performed by using multi-spectral images with relatively low resolution, and precise fine co-registration was conducted centering on the region of interest of the panchromatic image for more accurate co-registration performance. The experiment was conducted by 120 combination of 16 KOMPSAT-3·3A 1G images taken in Daejeon area. Experimental results show that a correlation coefficient between the convergence angles and fine co-registration errors was 0.59. In particular, we have shown the larger the convergence angle, the lower the accuracy of co-registration performance.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_4
• /
• pp.1901-1910
• /
• 2022

Arriving in the new space age, securing technology for fusion application of KOMPSAT-3·3A and global satellite images is becoming more important. In general, multi-sensor satellite images have relative geometric errors due to various external factors at the time of acquisition, degrading the quality of the satellite image outputs. Therefore, we propose a fine-image registration methodology to minimize the relative geometric error between KOMPSAT-3·3A and global satellite images. After selecting the overlapping area between the KOMPSAT-3·3A and foreign satellite images, the spatial resolution between the two images is unified. Subsequently, tie-points are extracted using a hybrid matching method in which feature- and area-based matching methods are combined. Then, fine-image registration is performed through iterative registration based on pyramid images. To evaluate the performance and accuracy of the proposed method, we used KOMPSAT-3·3A, Sentinel-2A, and PlanetScope satellite images acquired over Daejeon city, South Korea. As a result, the average RMSE of the accuracy of the proposed method was derived as 1.2 and 3.59 pixels in Sentinel-2A and PlanetScope images, respectively. Consequently, it is considered that fine-image registration between multi-sensor satellite images can be effectively performed using the proposed method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.209-216
• /
• 2018

High-resolution satellite imagery is used in diverse fields such as meteorological observation, topography observation, remote sensing (RS), military facility monitoring and protection of cultural heritage. In satellite imagery, low-resolution imagery can take place depending on the conditions of hardware (e.g., optical system, satellite operation altitude, image sensor, etc.) even though the images were obtained from the same satellite imaging system. Once a satellite is launched, the adjustment of the imaging system cannot be done to improve the resolution of the degraded images. Therefore, there should be a way to improve resolution, using the satellite imagery. In this study, a super resolution (SR) algorithm was adopted to improve resolution, using such low-resolution satellite imagery. The SR algorithm is an algorithm which enhances image resolution by matching multiple low-resolution images. In satellite imagery, however, it is difficult to get several images on the same region. To take care of this problem, this study performed the SR algorithm by calibrating geometric changes on images after applying automatic extraction of feature points and projection transform. As a result, a clear edge was found just like the SR results in which feature points were manually obtained.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.186-191
• /
• 1998

The first step in change detection in any SAR monitoring, including SAR interferometry, is the co-registration of the images. CCPs (Ground Control Points) for co-registration are usually detected manually, but for qualitative analyses of enormous volumes of data, some automation of the process will become necessary. An automated determination of common CCPs for the same path/row data is especially desirable. We selected the intersections of linear features as the candidates of common GCPs Very bright point targets, which are commonly used as GCPs, have the drawback of appearing and disappearing depending on the conditions of the observation. But in the case of linear features, some detailed elements may appear differently in some case, but the overall line-likeness will remain. In this study, we selected 18 common GCPs for a single-look JERS-1 SAR image of Omaezaki area in central Japan. Although the GCPs in the first image had to be selected either interactively or semi-automatically, the same GCPs in all other images were successively detected automatically using a tiny sub-image around each GCP and a dilated mask of each linear feature in the first image as the reference data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.91-98
• /
• 2016

Detection and classification of underwater objects in sonar imagery are challenging problems. This paper proposes a system that detects and identifies underwater objects at the sea floor level using a sonar image and image processing techniques. The identification process of underwater objects consists of two steps; detection of candidate regions and identification of underwater objects. The candidate regions of underwater objects are extracted by image registration through the detection of common feature points between the reference background image and the current scanning image. And then, underwater objects are identified as the closest pattern within the database using eigenvectors and eigenvalues as features. The proposed system is expected to be used in efficient securement of Q route in vessel navigation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.453-464
• /
• 2019

Recently, as the demand for 3D geospatial information increases, the importance of rapid and accurate data construction has increased. Although many studies have been conducted to register UAV (Unmanned Aerial Vehicle) imagery based on LiDAR (Light Detection and Ranging) data, which is capable of precise 3D data construction, studies using LiDAR data embedded in MMS (Mobile Mapping System) are insufficient. Therefore, this study compared and analyzed 9 matching algorithms based on feature points for registering reflectance image converted from LiDAR point cloud intensity data acquired from MMS with image data from UAV. Our results indicated that when the SIFT (Scale Invariant Feature Transform) algorithm was applied, it was able to stable secure a high matching accuracy, and it was confirmed that sufficient conjugate points were extracted even in various road environments. For the registration accuracy analysis, the SIFT algorithm was able to secure the accuracy at about 10 pixels except the case when the overlapping area is low and the same pattern is repeated. This is a reasonable result considering that the distortion of the UAV altitude is included at the time of UAV image capturing. Therefore, the results of this study are expected to be used as a basic research for 3D registration of LiDAR point cloud intensity data and UAV imagery.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.183-190
• /
• 2007

To make use of surveying data obtained from different sensors and different techniques, it is a pre-requite step that register them in a common coordinate system. For this purpose, we developed methodologies to register IKONOS-2 Satellite Imagery using LiDAR(Light Detection And Ranging) data. To achieve this, conjugate features from these data should be extracted in advance. In this study, linear features are chosen as conjugate features. Then, to register them, observation equations are established from similarity measurements of the extracted features and the results was evaluated statistically. The results clearly demonstrate that the proposed algorithms are appropriate to register these data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.437-444
• /
• 2008

In the paper, a methodology is verified to integrate IKONOS-2 satellite imagery and ALS dataset by compensating biases of RPC models. To achieve this, conjugate features from both data should be extracted in advance. For this purpose, linear features are chosen as conjugate features because they can be accurately extracted from man-made structures in urban area and more easily extracted than point features from ALS data. Then, observation equations are established from similarity measurements of the extracted features. During the process, several kinds of transformation functions were selected and used to register them. In addition, it was also analyzed how the number of linear features used as control features affects the accuracy of registration results. Finally, the results were evaluated by using check-points obtained from DGPS surveying techniques and it was clearly demonstrated that the proposed algorithms are appropriate to integrate these data.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.216-219
• /
• 2004

In this study, the concept and techniques to generate the level lA, lB and 2A image products have been reviewed. In particular, radiometric and geometric corrections and bands registration used to generate level lA, lB and 2A products have been focused in this study. Radiometric correction is performed to take into account radiometric gain and offset calculated by compensating the detector response non-uniformity. And, in order to compensate satellite altitude, attitude, skew effects, earth rotation and earth curvature, some geometric parameters for geometric corrections are computed and applied. Bands registration process using the matching function between a geometry, which is called 'reference geometry', and another one which is corresponds to the image to be registered is applied to images in case of multi-spectral imaging mode. In order to generate level-lA image products, a simple radiometric processing is applied to a level-0 image. Level-lB image has the same radiometry correction as a level-lA image, but is also issued from some geometric corrections in order to compensate skew effects, Earth rotation effects and spectral misregistration. Level-2A image is generated using some geo-referencing parameters computed by ephemeris data, orbit attitudes and sensor angles. Level lA image is tested by visual analysis. The difference between distances calculated level 1 B image and distances of real coordinate is tested. Level 2A image is tested Using checking points.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.275-278
• /
• 2004

The geo-referencing of satellite imagery is a key task in remote sensing. GCPs are points the position of which is known both in the image and in the supporting maps. Mapping function makes the determination of map coordinates of all image pixels possible. Generally manual operations are done to identify image points corresponding to the points on a digital topographic map. In order to accurately measure ground coordinates of GCPs, differential global positioning system (DGPS) surveying are used. To acquire the sufficient number of well distributed GCPs is one of the most time-consuming and cost-consuming tasks. This paper describes the procedure of automatically extracting GCOs using GCP database. GCP image chips and image matching technique are used for automatic extraction of GCPs. We developed image processing tool for making image chip GCPs and Web Server for management of GCPs.