• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.4
• /
• pp.284-290
• /
• 2013

Feature detection is very important to image processing area. In this paper we compare and analyze some characteristics of image processing algorithms for corner and blob feature detection. We also analyze the simulation results through image matching process. We show that how these algorithms work and how fast they execute. The simulation results are shown for helping us to select an algorithm or several algorithms extracting corner and blob feature.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.167-174
• /
• 1996

A Fuzzy Logic Controller(FLC) was developed for the autonomous operation of speedsprayer in an orchard. The autonomous operation with the FLC was graphically simulated under the real condition of the orchard. Image processing was used to find out the direction of running and four ultrasonic sensors were used to detect obstacles for the running. The simulation results showed that the speedsprayer could be operated autonomously with the FLC combined with the image processing and the ultrasonic sensors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.3 s.43
• /
• pp.243-250
• /
• 1992

The purposes of this research were to analyze factor structure and the face image to hairstyles which was made by Computer graphic simulation. To select ten hairstyle, a standard face selected between women of $20\~25$ years, and four factor (straight, curl, hair length, front hair, part hair) which were made of stand of hairstyle were applied. The results were as follows; 1 face image factor by hairstyle variation were found to five factor; negative and pogitive, indivisuality, youthfulness, unbanity, intelligence. 2. The result of analysis to face image by hairstyle factor were (1) In the hair state, straight hair was explained by the youthful, pure, decent image than curl. (2) In the hair length, the longer hair was explained by the more feminine, softness image. The shorter hair was explained by the more vigorous, youthful image. (3) In the presence of front hair, bang hair was explained by the commonness, moderate, classical image than all back hair (4) In the part hair, part hair was explained by the modern and unbanity image than no part hair.

• Journal of Korea Multimedia Society
• /
• v.18 no.3
• /
• pp.349-358
• /
• 2015

Simulating color appearance of makeup effect is an important issue in computer graphics as well as cosmetic industry. Most of previous works on makeup simulation are simple color blending to mimic the cosmetic effects. Some of previous works employed Kubelka-Munk model to accurately simulate the layering effect of cosmetics. However, the simulation limited on single point, and the rest of area are still computed by simple color blending utilizing the color of the single point simulation. This paper presents an image-based method to compute the color appearance effect of makeup application using per-pixel Kubelka-Munk model. Unlike the previous methods, it is possible to compute per-pixel application thickness as well as optical property of cosmetics. The computed thickness pattern can be used in makeup simulation for a more realistic makeup simulation.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.370-376
• /
• 2023

Aiming at the problems of low image enhancement accuracy, long enhancement time and poor image quality in the traditional robot sequence motion image enhancement methods, an adaptive enhancement method for robot sequence motion image is proposed. The feature representation of the image was obtained by Karhunen-Loeve (K-L) transformation, and the nonlinear relationship between the robot joint angle and the image feature was established. The trajectory planning was carried out in the robot joint space to generate the robot sequence motion image, and an adaptive homomorphic filter was constructed to process the noise of the robot sequence motion image. According to the noise processing results, the brightness of robot sequence motion image was enhanced by using the multi-scale Retinex algorithm. The simulation results showed that the proposed method had higher accuracy and consumed shorter time for enhancement of robot sequence motion images. The simulation results showed that the image enhancement accuracy of the proposed method could reach 100%. The proposed method has important research significance and economic value in intelligent monitoring, automatic driving, and military fields.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.349-354
• /
• 1999

Electro-Optical Camera (EOC) is the main payload of the KOMPSAT-1 satellite to perform the mission of cartography that builds up a digital map of Korean territory including a digital terrain elevation map. This paper discusses the issues of the digital image simulation of EOC for the generation of EOC simulated scene as taken by EOC at 685km altitude on orbit. For the purpose, simulation work has been performed with the sensor models of EOC and the satellite platform motions models through image chain analysis from the illumination source (Sun) to a simulated image output in digital number. MODTRAN fur radiance calculation, MTF models of optics, detector and motions of EOC for system point spread function (PSF), and signal chain equations for digital number output are described. Several noise models of EOC are also considered. The final output is the EOC simulated image in digital number. The simulation technique can be used in several phase of a spaceborne electro-optical system development project, feasibility study phase, design, manufacturing, test phases, ground image processing phases, and so on.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.559-564
• /
• 2002

This paper describes a new algorithm named as ray following algorithm which is applied for high-resolution satellite image simulation. The problems of the conventional ray tracing algorithm are pointed out especially when terrain elevations vary abruptly. The proposed algorithm follows the directional ray vector sequentially and thoroughly in order to determine the crossing point of the ray with the terrain surface. This way of sequential height comparison method is regarded as the only way to obtain accurate surface cross-section when a highly variant digital surface model is used. The experimental results show and compare the validities of the conventional and proposed algorithms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.397-405
• /
• 2024

In order to improve the visibility of nighttime thermal infrared images, a simulation method with daytime color images was proposed. As a simulation method consisting of two steps, the daytime thermal infrared image was simulated by learning the unpaired nighttime thermal infrared image and daytime thermal infrared image, then the result was translated into a daytime color image. A temperature change regression equation was constructed and applied to reflect the systematic characteristics of temperature changes in daytime and nighttime images, and day and night simulation and colorization were trained and modeled by CycleGAN. For the experimental area, 100 images were captured and used for training. As a result, the simulation showed an average SSIM of 0.2449 and a PSNR of 51.2254. It was confirmed that the method could simulate complex and detailed features such as vegetation.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.421-430
• /
• 2021

The multifocal multiphoton microscopy (MMM) enables high-speed imaging by the concurrent scanning and detection of multiple foci generated by lenslet array or diffractive optical element. The MMM system mainly suffers from crosstalk generated by scattered emission photons that form ghost images among adjacent channels. The ghost image which is a duplicate of the image acquired in sub-images significantly degrades overall image quality. To eliminate the ghost image, the photon reassignment method was established using maximum likelihood estimation. However, this post-processing method generally takes a longer time than image acquisition. In this regard, we propose a novel strategy for rapid noise reduction in the MMM system based upon Monte-Carlo (MC) simulation. Ballistic signal, scattering signal, and scattering noise of each channel are quantified in terms of photon distribution launched in tissue model based on MC simulation. From the analysis of photon distribution, we successfully eliminated the ghost images in the MMM sub-images. If the priori MC simulation under a certain optical condition is established at once, our simple, but robust post-processing technique will continuously provide the noise-reduced images, while significantly reducing the computational cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.818-819
• /
• 2014

Recently there are many works conducted on utilizing the DIBR (Depth-Image-Based Rendering) based intermediate images for the three-dimensional displays that do not require the use of stereoscopic glasses. However the prior works have used expensive depth cameras to obtain high-resolution depth images since DIBR-based intermediate image generation method requires the accuracy for depth information. In this study, we have developed the simulation to generate multi-view intermediate images based on the depth and color images using Microsoft Kinect. This simulation aims to support the acquisition of multi-view intermediate images utilizing the low-resolution depth and color image from Kinect, and provides the integrated service for the quality evaluation of the intermediate images. This paper describes the architecture and the system implementation of this simulation program.