• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.568-573
• /
• 2018

UAV(Unmanned Aerial Vehicle) is widely used in space information construction, agriculture, fisheries, weather observation, communication, and entertainment fields because they are cheaper and easier to operate than manned aircraft. In particular, UAV have attracted much attention due to the speed and cost of data acquisition in the field of spatial information construction. However, ortho image images produced using UAVs are distorted in buildings and forests. It is necessary to solve these problems in order to utilize the geospatial information field. In this study, fixed wing, rotary wing, vertical take off and landing type UAV were used to detect distortions of ortho image of UAV under various conditions, and various object areas such as construction site, urban area, and forest area were captured and analysed. Through the research, it was found that the redundancy of the unmanned aerial vehicle image is the biggest factor of the distortion phenomenon, and the higher the flight altitude, the less the distortion phenomenon. We also proposed a method to reduce distortion of orthoimage by lowering the resolution of original image using DTM (Digital Terrain Model) to improve distortion. Future high-quality unmanned aerial vehicles without distortions will contribute greatly to the application of UAV in the field of precision surveying.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.115-122
• /
• 2002

The mainly used technique to rectify satellite images with distortion is to develop a mathematical relationship between the pixel coordinates on the image and the corresponding points on the ground. By defining the relationship between two coordinate systems, a polynomial model is designed and various linear transformations are used. These GCP based geometric correction has performed overall plane to plane mapping. In the overall plane mapping, overall structure of a scene is considered, but local variation is discarded. The highly variant height of region is resampled with distortion in the rectified image. To solve this problem, this paper proposed the TIN-based rectification on a satellite image. The TIN based rectification is good to correct local distortion, but insufficient to reflect overall structure of one scene. So, this paper shows the experimental result and the analysis of each rectification model. It also describes the relationship GCP distribution and rectification model. We can choose a geometric correction model as the structural characteristic of a satellite image and the acquired GCP distribution.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.35-39
• /
• 2002

Purpose: The altered gantry angle during scanning for some multiplanar reconstruction CT program (CT/MPR) may cause distortion of the image. The aim of this study was to ascertain whether there is a image distortion in a reformatted image when the gantry and the object are equally inclined using ToothPix and DentaScan program. Materials and Methods: A resin block model with four cylindrical holes and a human dry mandible were used. Two MPR software packages, ToothPix and DentaScan program, were used for reformatted panoramic images. The block and the gantry were equally inclined at 0°, 15°, and 30°. Results: With ToothPix program, a resin block model with empty holes and a dry mandible showed inclined images in the reformatted panoramic image. Increasing the gantry angle, the depth and inclination of the holes were increased in the reformatted central panoramic images. However, a resin block model with gutta perch a in its holes and a dry mandible with a wire in its mandibular canal didn't show image distortion. With DentaScan program, image distortion was not seen in any situation. Conclusion: ToothPix program may distort the reformatted image when the gantry angle is not at zero degrees. However, with DentaScan program, the patient may be positioned comfortably and the gantry can be adjusted to the patient positioning.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.231-235
• /
• 2013

Lens distortions have a significant impact on captured or projected image geometry. This paper proposes a lens distortion correction with gradient components for wide-angle lenses. In most cases, distortion coefficients are estimated using a distortion model by point correspondences. Corrected images using only point correspondences can be compensated excessively, therefore, producing bended lines into the opposite direction near the corners. To curtail these phenomena, we propose to adopt the gradient components in addition to positions to obtain the distortion coefficients. We verified the improved accuracy and the straightness of the proposed method through experimentation.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.601-605
• /
• 2009

Due to the fact that fish-eye lens can provide super wide angles with the minimum number of cameras, field-of-view over 180 degrees, many vehicles are attempting to mount the camera system. Camera calibration should be preceded, and geometrical correction on the radial distortion is needed to provide the images for the driver's assistance. However, vehicle fish-eye cameras have diagonal output images rather than circular images and have asymmetric distortion beyond the horizontal angle. In this paper, we introduce a camera model and metric calibration method for vehicle cameras which uses feature points of the image. And undistort the input image through a perspective projection, where straight lines should appear straight. The method fitted vehicle fish-eye lens with different field of views.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1923-1932
• /
• 2013

In order to solve the problem of severely distorted images from a wide-angle camera, we propose a calibration method which corrects a radial distortion in wide-angle images by estimation and validation of camera model. First, we estimate a camera model consisting of intrinsic and extrinsic parameters from calibration patterns, where intrinsic parameters are the focal length, the principal point and so on, and extrinsic parameters are the relative position and orientation of calibration pattern from a camera. Next we validate the estimated camera model by re-extracting corner points by inversing the model to images. Finally we correct the distortion of the image using the validated camera model. We confirm that the proposed method can correct the distortion more than 80% by the calibration experiments using the lattice shaped pattern images captured from a general web camera and a wide-angle camera.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4060-4079
• /
• 2020

Blur is an important type of image distortion. How to evaluate the quality of blurred image accurately and efficiently is a research hotspot in the field of image processing in recent years. Inspired by the multi-scale perceptual characteristics of the human visual system (HVS), this paper presents a no-reference image blur/sharpness assessment method based on multi-scale local features in the spatial domain. First, considering various content has different sensitivity to blur distortion, the image is divided into smooth, edge, and texture regions in blocks. Then, the Gaussian scale space of the image is constructed, and the categorized contrast features between the original image and the Gaussian scale space images are calculated to express the blur degree of different image contents. To simulate the impact of viewing distance on blur distortion, the distribution characteristics of local maximum gradient of multi-resolution images were also calculated in the spatial domain. Finally, the image blur assessment model is obtained by fusing all features and learning the mapping from features to quality scores by support vector regression (SVR). Performance of the proposed method is evaluated on four synthetically blurred databases and one real blurred database. The experimental results demonstrate that our method can produce quality scores more consistent with subjective evaluations than other methods, especially for real burred images.

• Journal of Korea Multimedia Society
• /
• v.16 no.3
• /
• pp.281-289
• /
• 2013

The iCAM06 has been used as an image appearance model for HDR image rendering. The iCAM06 goes through the color space conversions and scale conversions of the several steps to present HDR images. The dynamic range of an HDR image needs to be mapped on the range of output devices, which is called the tone mapping. However, tone compression process of the iCAM06 causes color distortion because of color-clipping and cross-stimulus. Therefore, we proposed that a color correction method in IPT space which compensates the color distortion in tone compression process. Through the experimental results, we conformed that proposed color correction method had better performance than the iCAM06 and enhanced models.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.225-228
• /
• 2005

According to a popularization of the Internet and digital lifestyle, digital watermarks have been proposed for protection of copyrighted multimedia content. In blind watermark detection, which an original image is not provided, robustness against geometric distortion and compression remains challenging. In this paper, we propose a new perceptual blind discrete wavelet transform - discrete Fourier transform (DWT-DFT) composite watermarking scheme that is robust against both general linear transform and JPEG compression. This algorithm constructs an image-dependent watermark in the most significant DWT coefficients, which is determined by using a hierarchical tree structure. Strength of watermark is determined from a just-noticeable difference (JND) profile of a perceptual model. Furthermore, a desired template is inserted into DFT domain of the watermarked image. In new manner, a cross-ratio of four collinear points is used for detecting the template. Experimental results have showed that the proposed scheme is robust against general linear distortion, JPEG compression and various general kinds of attacks in the Stirmark 3.1 watermark evaluation tool.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.851-854
• /
• 2000

Digital halftoning is a technique to make an equivalent binary image from scanned photo or graphic images. Low pass filtering characteristic of human visual system can be applied to get the effect of spatial averaging of local area consisted of black and white pixels for gray image. The overlapping of black dot decreases brightness and black dot is very sensitive to human visual system in the bright region. In this paper, for gray-level expression, only bright gray region in the color image is considered for blue noise mask (BNM) approach. To solve this problem, BNM with CMY dot is used for the bright region instead of black dot. Dot-on-dot model with single mask causes the problem making much black dot overlap, color distortion. Therefore approach with three masks for C, M and Y each is proposed to decrease pixel overlap and color distortion.