• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.34-40
• /
• 2001

HPMC의 자연발화는 일정한 주위온도에서 자연발화의 연구와 Godbret-Greenwald가 고안한 전기로에서 운상상태의 최소발화온도를 구하였으며, 시료를 용기에 충전했을 경우 용기의 크기가 클수록 발화한계 온도는 낮아졌으며 겉보기활성화에너지는 Frank-Kamenetskii의 열발화이론으로부터 계산하였고, 운상상태의 발화온도는 21%의 산소농도하에서 최소발화온도를 구하였으며, 산소농도 변화의 실험결과 산소농도 10%에서 발화되지 않았으며 한계산소농도를 구할 수 있었다.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3630-3638
• /
• 1996

An experimental study has been conducted to explore the behaviors of the radiative ignition of polymethylmetacrylate(PMMA) in a confined enclosure such as the ignition delay time, PMMA surface temperature, the ignition location and the ignition process. In addition, the effects of hot wall orientation on the ignition delay and PMMA surface temperature were studied. When the hot wall is located at the bottom, ignition delay time is the shortest. Ignition surface temperature becomes the lowest for the hot top wall case. These are due to buoyancy effect. Since the radiative heat flux of hot wall is rather lower than laser source, the ignition is considered to be controlled by the mixing process. Therefore, the ignition location, where appropriate mixture of fuel and oxygen exists, occurs near the hot wall. The flame propagates along the hot wall where there exists sufficient oxygen.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.5-8
• /
• 2013

The ignition of aluminum particles under high pressure and temperature conditions is studied. The laser ablation method is used to generate aluminum particles exposed to pressures ranging between 0.35 and 2.2 GPa. A continuous wave $CO_2$ laser is then used to heat surface of the aluminum target until ignition is achieved. We confirm ignition by a spectroscopic analysis of AlO vibronic band of 484 nm wavelength. The radiant temperature is measured with respect to various pressures for tracing of required heating energy for ignition. Then the ignition temperature is deduced from the radiant temperature using the thermal diffusion equation. The established ignition criteria for corresponding temperature and pressure can be used in the modeling of detonation behavior of heavily aluminized high explosives or solid propellants.

• 한국안전학회지
• /
• 제8권3호
• /
• pp.44-49
• /
• 1993

The spontaneous ignition induction time and temperature distribution were observed by performing experiments for granulated activated carbon. As the results of the experiments at the same amplitude, the critical spontaneous ignition temperature was decreased with increase of the time period, while, the ignition induction time was increased with the increase of the time period. The critical spontaneous ignition temperature was decreased with the increase of the amplitude for the shorter period. The temperature distribution of the sample showed the highest around ignition-point at center of the vessel and after ignition the highest temperature was moved toward surface of the vessel.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.75-80
• /
• 1995

Spontaneous ignition characteristics of rice cracker were observed by preforming experiments at constant ambient temperature. As the results of the experiments, the critical spontaneous ignition temperature were exponentially decreased with the increase of ambient temperature. Type of combustion of rice cracker are smouldering combustion at low ignition temperature and flame combustion at high temperature. The rice cracker containing pam oil showed lower spontaneous ignition temperature than pure rice cracker because of oxidation heat of pam oil.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.45-53
• /
• 1992

Sponataneous ignition characteristics for granulated activated carbon were observed by performing experiments at constant ambient temperature and varying the ambient temperature sinusoidally. In case of varying the ambient temperature sinusoidally, the amplitudes of temperature were 5$^{\circ}C$, 1$0^{\circ}C$ and 15$^{\circ}C$ respectively, and the period in each amplitude was varied at an interval of 30minutes from zero to 3hours. As the results of experiments at a constant ambient temperature, the critical spontaneous ignition temperature of the sample decreased as the sample vessel size increased. Apparent activation energy of the sample calculated from the Frank-Kamenetskii's thermal Ignition theory was 38.82［kca1/mo1］ In case of varying the ambient temperature sinusoidally, the critical spontaneous ignition tempera-ture was lower than that at the constant ambient temperature, and the minimum critical spontaneous ignition temperature decreased with the amplitude of heating sinusoidal curve. At the same amplitude, the critical spontaneous ignition temperature decreased until it reached the minimum point and then in-creased as the period increased.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.47-56
• /
• 1992

Spontaneous ignition charactenstics for fish meal were observed by performing experiments at constant ambient temperature and varying the ambient temperature sinusoidally. As the results of the experiments at a constant ambient temperature, the critical spontaneous ignition temperature of the sample for large, intermediate and small vessels was 170.5$^{\circ}C$, 177.5$^{\circ}C$ and 188.5$^{\circ}C$, respectively. The critical spontaneous ignition temperature decreased as the sample vessel size increased. Apparent activation energy of used fish meal calculated from the Frank-Kamenetskii's thermal ignition theory was 37.60Kcal/mol. In case of varying the ambient temperature sinusoidally, the amplitudes of temperature were 1$0^{\circ}C$, 2$0^{\circ}C$ and 3$0^{\circ}C$ respectively with the period in each amplitude 1hr, 2hrs and 3hrs. The results showed that the critical spontaneous ignition temperatures at the varied amplitudes of temperature were lower than that at the constant anbient temperature and increased as the amplitude increased. At the same amplitude, the critical spontaneous ignition temperature increased with the period.

• 한국화재소방학회논문지
• /
• 제17권4호
• /
• pp.117-123
• /
• 2003

본 연구에서는 Setchkin 착화성시험장치와 산소소비원리를 이용한 콘칼로리미터를 사용하여 난연처리되지 않은 경질우레탄폼의 착화특성 및 열방출특성 및 플래쉬오버 가능성에 대하여 연구하였다. 연구결과 경질폴리우레탄폼의 유도발화온도(FIT)는 $383^{\circ}C$∼$390^{\circ}C$, 자연발화온도(SIT)는 $493^{\circ}C$∼$495^{\circ}C$로 나타났으며 자연발화온도가 유도발화온도에 비해 약 $100^{\circ}C$ 높게 나타났다. 콘칼로리미터실험에서는 착화시간은 heat flux의 크기가 증가할수록 빨라졌으며 동일한 heat flux 크기에서는 밀도가 작을수록 착화시간은 짧게 나타났다. 열방출율은 $50 ㎾\m^2$에서 가장 크게 나타났으며, 최대열방출율의 경우 heat flux의 크기와 밀도가 커질수록 증가하는 경향을 보였다. 착화시간과 열방출율의 관점에서 경질폴리우레탄폼의 화재성능은 가해진 heat flux의 크기와 밀도에 큰 영향을 받는 것으로 나타났으며, Petrella의 제안방법에 의해 플래쉬오버 가능성을 분류한 결과 플래쉬오버 가능성이 큰 것으로 분류되었다.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.45-51
• /
• 2018

This study was conducted to assess the hazards of gasoline in relevance to the changes in octane numbers, and gasoline's spontaneous ignition temperature and instantaneous ignition temperature were measured. Spontaneous ignition temperature of regular gasoline was $301^{\circ}C$ for sample quantity of $100{\sim}125{\mu}{\ell}$. Spontaneous ignition temperature of middle gasoline was $380^{\circ}C$ for sample quantity of $125{\mu}{\ell}$ and that of premium gasoline was $400^{\circ}C$. As gasoline's octane numbers increased, their spontaneous ignition temperatures increased, and their instantaneous ignition temperature were almost identically $499^{\circ}C$ for sample quantity of $125{\mu}{\ell}$. In addition, activation energies of regular gasoline, middle gasoline, and premium gasoline were 10.48 Kcal/mol, 16.89 Kcal/mol, and 24.55 Kcal/mol respectively.

• 한국연소학회지
• /
• 제18권4호
• /
• pp.12-20
• /
• 2013

The ignition delay time is an important factor to understand the combustion characteristics of internal combustion engine. In this study, ignition delay times of cool and thermal flame were observed separately in homogeneous charge compression ignition(HCCI) engine. This study presents numerical investigation of ignition delay time of n-heptane and alcohol(ethanol and n-butanol) binary fuel. The $O_2$ concentration in the mixture was set 9-10% to simulate high exhaust gas recirculation(EGR) rate condition. The numerical study on the ignition delay time was performed using CHEMKIN codes with various blending ratios and EGR rates. The results revealed that the ignition delay time increased with increasing the alcohol fraction in the mixture due to a decrease of oxidation of n-heptane at the low temperature. From the numerical analysis, ethanol needed more radical and higher temperature than n-butanol for oxidation. In addition, thermal ignition delay time is sharply increasing with decreasing $O_2$ fraction, but cool flame ignition delay time changes negligibly for both binary fuels. Also, in high temperature regime, the ignition delay time showed similar tendency with both blends regardless of blending ratio and EGR rate.