• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 춘계학술대회
• /
• pp.34-38
• /
• 1991

This paper describes and discusses the employment of EMG pattern analysis to provide upper-motor-neuron paraplegics with patient-responsive control of FES (functional electrical stimulation) for the purpose of walker-supported walking. The use of above - lesion EMG signals as a solution to the control problem is considered. The AR (autoregressive) parameters are identified by Kalman filter algorithm using DSP chip and classified by fuzzy theory. The control and stimuli part of the below-lesion are based on microprocessor(8031). The designed stimulator is a 4-channel version. The experiments described above have only attempted to discriminate between standing function and sit-down function. A further advantage of the this system is applied for motor rehabilitation of social readaption of paralyzed humans.

• 항공우주기술
• /
• 제6권1호
• /
• pp.114-119
• /
• 2007

본 연구는 KSLV-I 페이로드 페어링을 제외한 2단 구조부에 대한 모드시험 결과를 기술하고 있다. 2단부는 크게 위성 분리부, 탑재부, 킥모터 지지부, 킥모터로 구성되어 있다. 번지코드를 이용하여 자유경계단 조건을 모사하였고 가진은 대형 가진 망치를 사용하였다. 이러한 모드시험 결과를 통하여 모드변수를 추출할 수 있고, 2단부 구조체의 동특성을 파악할 수 있다. 시험 결과는 TDAS를 사용하여 분석하였고, 100Hz 이하의 모드변수 및 모드형상을 추출하였다.

• 대한물리치료과학회지
• /
• 제15권3호
• /
• pp.73-79
• /
• 2008

Background : Treadmill training has been proposed as a useful adjunct to conventional physical therapy to restore ability to walk after stroke. The purpose of this study to inform clinical practise by evaluating the research evidence for the effectiveness of treadmill training after stroke. Methods : We searched to the effectiveness of any form of intervention for effect of treadmill training by Dankook University electronic library databases of Medline, Embase, Cinahl, Amed and PEDro combined with a hand search of papers published in relevant peer-reviewed journals. Any type of study relevant to the topic published in English during time period from 1980 to 2007 was included. Results : The literature search identified 35 studies. The included studies enrolled a total of 374 subjects. 1. Treadmill retraining without partial body weight support might be more effective than no treatment at improving gait velocity, get up and go time, gait endurance and step length symmetry. 2. Treadmill retraining with partial body weight support might be more effective than no treatment in improving step length symmetry, gait velocity, gait endurance and balance. 3. Treadmill retraining might be more effective with partial body weight support than without it at improving gait velocity and motor improvement as measured by The Stroke Rehabilitation Assessment of Movement(STREAM). 4. Treadmill retraining without partial body weight support may be no different from physiotherapy and increase gait velocity to conventional gait therapy. 5. Treadmill retraining with partial body weight support may be no different from physiotherapy for gait velocity, motor recovery and balance. Conclusion The review suggests that although treadmill training of gait, especially with partial body weight support, might Improve gait parameters and functional mobility, unless treadmill training is directed at Improving gait speed it might be no more effective than conventional physical therapy at improving gait parameters.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.293-300
• /
• 2008

Efficient designing of SRM Grains in the field of Rocketry is still the main test for most of the nations of world for scientific studies, commercial and military applications. There is a strong need to enhance thrust, improve the effectiveness of SRM and reduce mass of motor and burning time so as to allow the general design to increase the weight of payload/on board electronics. Moreover burning time can be increased while keeping the weight of the propellant and thrust in desired range, so as to give the time to control / general design group in active phase for incorporating delayed cut off if required. A mathematical design, optimization & analysis technique for Slotted Tube Grain has been discussed in this paper. In order to avoid the uncertainties that whether the Slotted Tube grain configuration being designed is best suited for achieving the set design goals and optimal of all the available designs or not, an efficient technique for designing SRM Grain and then getting optimal solution is must. The research work proposed herein addresses and emphasizes a design methodology to design and optimize Slotted Tube Grain considering particular test cases for which the design objectives and constraints have been given. In depth study of the optimized solution have been conducted thereby affects of all the independent parametric design variables on optimal solution & design objectives have been examined and analyzed in detail. In doing so, the design objectives and constraints have been set, geometric parameters of slotted tube grain have been identified, performance prediction parameters have been calculated, thereafter preliminary designs completed and finally optimal design reached. A Software has been developed in MATLAB for designing and optimization of Slotted Tube grains.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.56-63
• /
• 2014

This paper provides a comprehensive study on the Sommerfeld phenomena in an asymmetric rotor with a nonideal power supply. An analytical approach is employed by deriving the equations of motion in a nondimensional form. The system parameters, including the asymmetry, external and internal damping, and motor power, are chosen to find their effects on the characteristics of the Sommerfeld phenomena and critical behavior around resonance. Results show that the rotor asymmetry suppresses the Sommerfeld phenomena and helps pass through resonance if the asymmetry is small. However, it is observed that the opposite effects exist in case of a large asymmetry. It is also found that the effects of external damping on the Sommerfeld phenomena are similar to those of the asymmetry, whereas internal damping has less effects than external damping and the asymmetry. By performing numerical simulations, four types of critical behavior are identified from the viewpoints of the stability and the passage through resonance.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.199-208
• /
• 1994

The inverted pendulum is one of the control mechanism that has been frequently used to verify the control theory in the laboratory. In this paper, the author made an inverted pendulum driven by DC servomotor with a simple DC motor drive circuit, and constituted a control system. The control mechanism is modeled, and identified parameters of inverted pendulum system by experimental method. The author used the LQ regulator as control algorithm and the minimum order observer algorithm to observe states that can not be measured. And the validity of parameter identification and the excellent performance of the control system designed by LQR are confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.148-151
• /
• 1993

Load models for the analysis and simulation of power system are often introduced when the more accurate result is required. This work presents a single expressed load model as T-equivalent circuit of induction motor, for the composite characteristics of various loads. The parameters of the proposed load model are identified based on the system identification method as Recursive Least Square identification method. Case study results show the accuracy of proposed load model, and compared with some field measurements.

• 한국지능시스템학회논문지
• /
• 제12권1호
• /
• pp.33-38
• /
• 2002

본 논문에서는 역동력학과 퍼지기법을 기반으로 하는 DC 모터 속도제어용 2자유도 제어기를 설계한다. 제안된 제어기는 DC 모터 시스템의 역동력학 모델, 전처리필터와 퍼지보상기로 구성된다. 모델은 쿨롱마찰을 내포하는 비선형 방정식으로 표시되며, 전처리필터는 역동력학 모델에 의해 유발될 수 있는 고주파 영향을 막아주며, 퍼지보상기는 모델의 불확실성, 외란 등으로 인한 오차를 보상한다. 퍼지보상기는 기준 입력 변화에 대한 추종성능과 외란에 대한 오차 제거성능을 동시에 개선하도록 설계된다. 모델과 보상기의 파라미터는 각각 실수코딩 유전알고리즘으로 추정되고 동조된다. 제안된 기법의 유효성은 실험을 통해 검증된다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.1-10
• /
• 2023

산업혁명의 발달로 인해 급격하게 증가된 온실가스 배출량을 저감하기 위해 배기 배출물 규제가 계속해서 강화되고 있다. 이를 만족시키기 위해선 친환경 연료의 사용은 필수적이다. 미래의 친환경 연료로서 수소가 주목받고 있지만, 물질적 특성으로 인해 취급과 보관에 큰 어려움을 겪고 있어, 이에 대안으로 암모니아가 제안되었다. 암모니아는 수소 대비 상온 조건에서 쉽게 액화가 가능하며, 에너지밀도가 높다. 이에 엔진의 연료로서 암모니아의 적용성을 검토하기 위해 직접분사식 암모니아 전소 엔진에서 연소제어인자의 변경에 따른 실험을 진행하였다. 본 실험은 점화시기(Spark Timing)와 공기과잉률(Excess Air Ratio) 두 개의 변수를 변경하여 실험을 진행하였다.엔진 속도 1,500 RPM 및 중부하 이상(제동 토크 200 Nm)의 조건에서 암모니아 전소를 하였을 때, 연소 안정성과 질소산화물, 미연 암모니아 등의 배기 배출물의 경향을 관찰하였다. 연소제어인자의 최적화를 통해 암모니아만을 연료로 사용한 경우에도 안정적인 연소가 가능한 조건을 찾을 수 있었고, 향후 운전영역 확장을 위한 전략을 적용할 계획이다.

• Clinical Pain
• /
• 제18권1호
• /
• pp.1-7
• /
• 2019

Objective: To investigate the cortical disinhibition in diabetic patients with neuropathic pain and without pain. In addition, we assessed the cortical disinhibition and pain relief after repetitive transcranial magnetic stimulation (rTMS). Method: We recruited diabetic patients with neuropathic pain (n = 15) and without pain (n = 15). We compared the TMS parameters such as motor evoked potential (MEP) amplitude, cortical silent period (CSP), intracortical inhibition (ICI %) and intracortical facilitation (ICF %) between two groups. Moreover, we evaluated the changes of pain and TMS parameters after five consecutive high frequency (10 Hz) rTMS sessions in diabetic patients with neuropathic pain. The neuropathic pain intensity (visual analog scale) and TMS parameters were assessed on pre-rTMS, post-rTMS 1day, and post-rTMS 5 day. Results: The comparison of the CSP, ICI % revealed significant differences between two groups (p<0.01). After rTMS sessions, the decrease in pain intensity across the three time points revealed a pattern of significant differences (p<0.01). The change of CSP and ICI % across the three test points revealed a pattern of significant differences (p<0.01). The ICI % revealed immediate increase after first rTMS application and significant increase after five rTMS application (p<0.01) in diabetic patients with neuropathic pain. The MEP amplitude and ICF % did not reveal any significant changes. Conclusion: Our findings demonstrate that cortical inhibition was decreased in diabetic patients with neuropathic pain compared with patients without pain. Furthermore, we also identified that five daily rTMS sessions restored the defective intracortical inhibition which related to improvement of neuropathic pain in diabetic patients.