• 한국정보과학회논문지:정보통신
• /
• 제29권4호
• /
• pp.368-374
• /
• 2002

UMTS와 같은 제 3세대 이동 통신 시스템에서의 value-added 서비스를 위한 중요한 점은 이동 사용자로부터의 지불을 받을 수 있는 지의 여부를 검사하는 것이다. 기존의 value-added 서비스를 위한 인증 및 지불 프로토콜은 사용자의 인증 기관의 역할을 해주는 온-라인(on-line) TTP에 의존하고 있다. 그러나 3 세대 이동 통신 시스템에서의 수많은 서비스 제공자들, 다양한 종류의 서비스들, 그리고 넓은 사용자 계층 등을 고려할 때 온-라인 TTP에 기반한 인증과 지불 기법은 실용적이지 못하다. 본 논문에서는 3 세대 이동 통신 시스템에서의 value-added 서비스를 위하여 티켓(ticket)을 이용하여 인증 및 지불 프로토콜을 제안한다. 제안한 티켓 기반 인증 및 지불 프로토콜은 온-라인 TTP와의 통신 없이 사용자의 비용 지불 여부를 확인할 수 있는 효율적인 방법을 제공한다. 또한 티켓에 기반한 제안된 프로토콜은 이동 사용자의 서비스 사용에 대한 익명성을 보장 할 수 있다.

• 한국재료학회지
• /
• 제27권9호
• /
• pp.501-506
• /
• 2017

Surface morphology and optical properties such as transmittance and haze effect of glass etched by physical and chemical etching processes were investigated. The physical etching process was carried out by pen type sandblasting process with $15{\sim}20{\mu}m$ dia. of $Al_2O_3$ media; the chemical etching process was conducted using HF-based mixed etchant. Sandblasting was performed in terms of variables such as the distance of 8 cm between the gun nozzle and the glass substrate, the fixed air pressure of 0.5bar, and the constant speed control of the specimen stage. The chemical etching process was conducted with mixed etching solution prepared by combination of BHF (Buffered Hydrofluoric Acid), HCl, and distilled water. The morphology of the glass surface after sandblasting process displayed sharp collision vestiges with nonuniform shapes that could initiate fractures. The haze values of the sandblasted glass were quantitatively acceptable. However, based on visual observation, the desirable Anti-Glare effect was not achieved. On the other hand, irregularly shaped and sharp vestiges transformed into enlarged and smooth micro-spherical craters with the subsequent chemical etching process. The curvature of the spherical crater increased distinctly by 60 minutes and decreased gradually with increasing etching time. Further, the spherical craters with reduced curvature were uniformly distributed over the etched glass surface. The haze value increased sharply up to 55 % and the transmittance decreased by 90 % at 60 minutes of etching time. The ideal haze value range of 3~7 % and transmittance value range of above 90 % were achieved in the period of 240 to 720 minutes of etching time for the selected concentration of the chemical etchant.

• Journal of Chest Surgery
• /
• 제21권4호
• /
• pp.619-629
• /
• 1988

The increasing number of replacement of the substitute cardiac valves were seen in these 2 years. Out of a total 1,408 patients with cardiac valve replacement, 54 required replacement of the substitute valves. Fifty-nine substitute valves replaced were 43 in mitral, 14 in aortic and 2 in tricuspid positions; and they were 36 Ionescu-Shiley, 15 Hancock and 3 Angell-Shiley bioprosthetic valves and 3 St. Jude Medical and 2 Bjork-Shiley prosthetic valves. Primary tissue failure was the most frequent reason of replacement[38 patients] followed by paravalvular leak[9 patients], prosthetic valve endocarditis[6 patients] and valve thrombosis[1 patient] in order. The most pronounced pathology of the failed xenograft valves seen in the primary tissue failure group was calcification and fixation of the cusps with or without tear and defect of the cuspal tissue. The operative mortality rate was 7.4%. Fifty early survivors were followed up for a total of 82.6 patient-years and there was no late death. Actuarial survival rate was 92.3*3.8% at 6 years after surgery. Although the definite tendency toward early and accelerated degeneration of the xenograft valves has been seen in patients younger than 20 to 25 years of age, no strict age limit from where the tissue failure slows down could be determined. The requirement of the ideal substitute valves would be the durability of the recently developed mechanical prostheses armed with the low thrombogenicity of the bioprostheses. At the present time, the need of compromise in selection between less thrombogenic bioprosthetic and more durable mechanical valves should be stressed. The difficulty in choice is yet important in patients of middle age and children where the use of homograft valves may be one of the solution despite of certain limitations from sociomedical reasons.

• 토지주택연구
• /
• 제11권1호
• /
• pp.109-116
• /
• 2020

This study aims to establish an approach to assess urban flood vulnerability by identifying social characteristics such as the road transportation and the vulnerable groups. Assessment procedures comprise three steps as: (1) composing the assessment criteria to reflect the urban characteristics; (2) calculating the weight; and (3) evaluating the vulnerability. The criteria were adopted by Delphi survey technique. Four criteria as land cover, residents, vulnerable areas, and disaster response were adopted in the current study. To determine the weight set of criteria, subjective and objective methods were combined. The weight set was determined using the combined method which reflects the Delphi method and Entropy analysis. In the process of data-based construction, GIS tools wwere used to extract administrative unit materials such as land cover, road status, and slope. Data on population and other social criteria were collected through the National Statistical Office and the Seoul Metropolitan statistical data. TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) technique, which uses materials from cell units in order to rank the closest distance to the best case and the farthest distance from the worst case by calculating the distances to the area of assessment, was applied to assess. The study area was the Dorimcheon basin, a flood special treatment area of Seoul city. The results from the current study indicates that the established urban flood vulnerability assessment approach is able to predict the inherent vulnerable factors in urban regions and to propose the area of priority control.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.193-200
• /
• 2007

The AOPs research defined by creating a sufficient amount of OH radicals from the dissolution of organic materials through photoxidation and research for a complete elimination of residual organic materials by membrane are actively ongoing. This research focuses on the hybrid processing of AOPs and M/F membrane to dissolve and eliminate organic chemicals in drinking water which are suspected of carcinogens. For this purpose, underground water was used as a source of drinking water for the hybrid processing of AOPs oxidation and M/F membrane, and a pilot plant test device was installed indoor. Carcinogenic chemicals of VOCs and pesticide were artificially mixed with the drinking water, which was then diluted close to natural water in order to examine treatment efficiency and draw optimal operation conditions. The samples used for this experiment include four chemicals phenol, chloroform, in VOCs and parathion, carbaryl in pesticide. As a result of the experiments conducted with simple, and compound solutions, the conditions to sufficiently dissolve and eliminate carcinogenic chemicals from the hybrid processing of where carcinogens were artificially added are : (hydrogen peroxide) prescribed solution 100 mg/L under pH 5.5~6.0, and the temperature $12{\sim}16^{\circ}C$, at the normal temperature and pressure. $d-O_3$ volume of 5.0 ppm and above and 30-40 minutes of reaction time are most appropriate and using MF/UF for membrane was ideal.

• 자원환경지질
• /
• 제21권3호
• /
• pp.235-255
• /
• 1988

Talc deposit of pipe-like form occurrs in the lower part of the Hyangsanri Dolomite with a strike of N40 -50 E and a dip of 40 -50 NW which is one formation of the Ogcheon Super Croup. The pipi-like ore body plunge at about $40^{\circ}$ to the west and are parallel to the lineation developed in the area. Structural formulae of tales occurred in this deposit are close to the ieal composition $Mg_6Si_8O_{20}(OH)_4$ showing limited deviation from ideal one. Substitution of Al for Si in tetrahedral site is of little or nothing ranging 0-0.04 and octahedral occupancy is close to six ranging 5.88-5.98 atoms per unit cell. Predominant octahedaral cation is Mg and proportion of divalent cations is generally over 97percent. Calcite -dolomite thermometry is obtained by determining the mol % $MgCO_3$using of EPMA and XRD methods. The peak metamorphic temperature can be estimated at $470{\pm}30^{\circ}C$ in the area whereas carbonates occurred at near talc ore show lower temperature than $400^{\circ}C$ that the calcite solvus limit is not well established. It indicates that the talc deposit was formed at the lower temperature that the metamorphic temperature. Cosequently, the formation of talc by metamorphism is questionable and the alteratin zone developed around the talc ore is very limited. The occurrence of talc ore in the dolomite as well as mineralogy, calcite-dolomite geothermometry, chlorite geothermometry, field and microscopic evidence suggest that siliceous ascending hydrothermal solution along the fracture is responsible for the formation of talc. It was considered that the slight fracturing of dolomite was formed by deformation prior to the mineralization.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1535-1544
• /
• 2017

Advances in FPGA technology have enabled fast real-time simulation of power converters, filters and loads. FPGA based HIL (Hardware-In-the-Loop) simulators have revolutionized control hardware and software development for power electronics. Common time step sizes in the order of 100ns are sufficient for simulating switching frequency current and voltage ripples. In order to keep the time step as small as possible, ideal switching function models are often used to simulate the phase legs. This often produces inferior results when simulating the discontinuous conduction mode (DCM) and disabled operational states. Therefore, the corresponding measurement and protection units cannot be tested properly. This paper describes a new solution for this problem utilizing a discrete-time PI controller. The PI controller simulates the proper DC and low frequency AC components of the phase leg voltage during disabled operation. It also retains the advantage of fast real-time execution of switch-based models when an accurate simulation of high frequency junction capacitor oscillations is not necessary.

• 폴리머
• /
• 제35권6호
• /
• pp.558-564
• /
• 2011

생체적합하고 생분해성을 갖는 폴리아미노산의 하나인 폴리아스팔트산은 팹타이드 결합으로 이루어진 수용성 합성고분자로서 의료용 소재 및 다양한 응용분야의 연구가 흥미있게 진행되어 왔다. 본 연구에서는 아미노산인 GABA(${\gamma}$-aminobutylic acid)와 ${\beta}$-alanine을 곁사슬에 도입한 폴리아스팔트산 유도체 고분자를 제조하고, 이들을 서로 다른 함량의 ethylene glycol diglycidyl ether(EGDE)를 사용하여 가교시켜 고흡수성 하이드로젤을 제조하였다. 각 하이드로젤에 대해 증류수와 PBS 용액에서 기본적인 팽윤물성, 젤의 가수분해 거동과 모폴로지를 조사하였다. 제조한 하이드로젤은 수용액에서 pH와 염(salt) 농도에 의존하는 민감성 팽윤거동을 보였으며, 또한 비교적 빠른 가수분해 거동을 나타내었다.

• 화훼연구
• /
• 제19권2호
• /
• pp.110-114
• /
• 2011

본 실험은 절화장미 'Akito' 품종을 재료로 하여 4가지 색상(yellow, orange, purple, blue)을 동시에 염색하기 위한 최적 조건을 구명하고자 수행하였다. 염료용액의 pH를 3.5에서 9.0으로 처리하였을 경우, pH 가 3.5에서 4가지색 모두 흡수속도가 빨랐다. 꽃의 착색에서는 각 pH별 차이가 없었고 잎에서는 pH의 차이보다는 색상의 차이에 따라 purple과 blue에서 색 발현이 현저하였다. 염료 별 농도처리에서 $10g{\cdot}L^{-1}$ 농도에서 가장 선명한 색 발현이 되었으나 유의성은 없었고 염색의 종류에 따라 유의차를 보였다. 염색에 미치는 처리시간은 10분 후에 파스텔 색상이 발현되었고, 30분 후에는 꽃의 색상이 가장 선명하였지만 동시에 잎에서도 착색이 진행되었다. 이상의 결과로부터 절화 장미 'Akito'의 염색 시 pH 3.5, 염색농도 $5-10g{\cdot}L^{-1}$, 처리시간 10-30분간 처리가 화색의 발현 및 품질의 완성도를 높이는데 적당하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.600-600
• /
• 2016

기후변화로 인한 가뭄 및 홍수 등의 이상 현상은 유역의 수자원에 미치는 영향이 크기 때문에 이에 대한 예측 및 적응방안을 마련하는 부분이 대두되고 있다. 따라서 본 연구에서는 유역의 수자원 관리를 위하여 단위유역에서의 수자원 취약성을 평가하고자 하였다. 평가 지표는 기후 및 사회 경제 환경적 측면을 고려하여 선정하였으며, 취약성 정의에 따라 수량 및 수질/수생태에 대하여 각각 노출, 민감도, 적응능력으로 구성하였다. 이후 다기준 의사결정기법(Multi-criteria Decision Making, MCDM) 중 TOPSIS(Technique for Order Performance by Similarity to Ideal Solution)를 적용하여 각각의 통합 취약성을 도출하였다. 지표 자료는 2010년을 기준으로 국가 통계 자료를 통해 수집하였으며, 유출량과 증발산량 자료는 준분포형 장기유출모형인 SWAT(Soil and Water Assessment Tool) 모형의 모의 자료(2005~2014)를 활용하였다. 또한, 지표에 대한 가중치는 전문가 설문조사를 통해 산정한 주관적 가중치(Subjective weight)와 수집된 자료를 통하여 산정한 객관적 가중치(Objective weight)로 구분하여 적용하였다. 인구 및 산업의 밀집도가 높은 한강권역에 대하여 표준단위유역(평균 $145km^2$)의 취약성을 평가하였으며, 각각의 취약성 우선 순위를 확인하였다. 수량 취약성의 경우에는 경기 강원북부와 충정도 일부 지역이 높은 것으로 나타났으며, 수질/수생태는 수도권 등 비교적 하류에 위치한 지역의 취약성 순위가 좀 더 높았다. 가중치 적용 방법에 따른 공간분포의 차이는 수질/수생태 취약성이 더 크게 나타나는 것을 확인할 수 있었다.