• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.150-155
• /
• 2016

To evaluate the autofocusing performance of recent mobile phone cameras, it is necessary to determine the peak position of the center field MTF (Modulation Transfer Function), -known as the through focus MTF- of the module. However, the MTF peak position found by conventional methods deviates from the ideal position due to the focus scanning resolution of mobile phone cameras. This inaccurate peak position results in false judgements of the optical performance, leading to yield losses or customer complaints. An increase in the focus scanning resolution can address this problem, but the manufacturing UPH (Unit per Hour) level will also unfortunately increase as well, resulting in a loss of manufacturing capabilities. In this paper, several fitting models are studied to find an accurate MTF peak position within a short period of time. With an analysis of a large amount of manufacturing data, it is demonstrated that the fitting methods can reduce false judgements and simultaneously increase the capabilities of the manufacturing system.

• 한국소음진동공학회논문집
• /
• 제13권7호
• /
• pp.508-516
• /
• 2003

The dynamic characteristics of an ell-lubricated, short squeeze film damper (SFD) with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove, and identified experimentally using an Active Magnetic Bearing (AMB) system as an exciter. In order to get the theoretical solution, the fluid film forces of the grooved SFD are analytically derived so that the dynamic coefficients of the SFD can be expressed in terms of its design parameters. For the experimental validation of the analysis, a test rig using an AMB as an exciter is proposed. As an exciter. the AMB represents a mechatronic device to levitate and position the test Journal without any mechanical contact, to generate relative motions of the Journal inside the tested SFD and to measure the generated displacements during experiments with fairly high accuracy. Using this test rig, experiments are extensively conducted with various values of clearance, which Is one of the most important design parameters. in order to investigate its effect on the dynamic characteristics and the performance of the SFD. Damping and Inertia coefficients of the SFD that are experimentally Identified are compared with the analytical results to demonstrate the effectiveness of the applied analysis. It Is also shown that the AMB is an ideal device for tests of SFDs.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권7호
• /
• pp.113-121
• /
• 2020

Multi-criteria stock selection is a critical issue for effective investment since the improper stock investment might cause many problems affecting investors negatively. Investors need a range of financial indicators while they are choosing the optimal set of stocks to invest. This study aims to rank the stock of agriculture companies indexed on the Vietnam Stock Exchange Market. The data of 13 agriculture companies during the 2016-2019 periods was analyzed by analytical hierarchy process (AHP) integrated with grey relational analysis (GRA), multi-objective optimization ratio analysis (MOORA), and technique for order performance by similarity to ideal solution (TOPSIS). The AHP method is employed to determine the weights of the proposed financial ratios, and GRA, TOPSIS, and MOORA approaches are used to obtain final ranking. The results indicated that HSL is the top stock with the highest rank and GRA, MOORA, and TOPSIS rankings have strong correlation values between 0.78-1. The findings suggest that the integrated model could be implemented effectively to specific analysis of industries such as oil and gas, textiles, food, and electronics in future research. Further, other techniques like COPRAS, KEMIRA, and EDAS could be employed to evaluate the financial performance of other companies to solve investment problems.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.90-96
• /
• 1999

Biodegradable films were prepared by solution blending method in the weight ratio of Chitosan and Algin for the purpose of useful bioimplants. The possibility of bioimplants, which prepared from natural polymers as a skin substitute and food wrapping materials were evaluated by measuring the biodegradability. these biodegradable films were inserted in the back of rats and their biodegradability was investigated by hematological change as a function of time. Rats study showed that low-Chitosan induced increments of monocyte and basophil after 48 hours of implantation. And medium-Chitosan showed increase of lymphocyte and decreased neutrophil counts after 48 hours of implantation. Low, medium Chitosan showed high hemoglobin contents, medium and high Chitosan showed high hematocrit value after 48 hours of implantation. As a result, medium, high-Chitosan induced potential incompatibility in the tissue after 48 hours, but there was little effects to the skin inflammation. The values of biodegradable films, which prepared from natural polymers measured in this study were some satisfiable results at short period with those of ideal skin bioimplants and artificial skin.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.50.2-50.2
• /
• 2018

The demand for steady and dependable power sources is very high in the field of sustainable energy because of the limited amount of fossil fuels reserves. Among several sustainable alternatives, solar energy may be the most efficient solution because it constitutes the largest renewable energy source. So far, the only practical way to store such large amounts of energy has been to use a chemical energy carrier likewise a fuel. In various solar energy to power conversion systems, the photoelectrochemical (PEC) splitting of water into hydrogen and oxygen by the direct use of solar energy is an ideal process. It is a renewable method of hydrogen production integrated with solar energy absorption and water electrolysis using a single photoelectrode. Previous studies on photoelectrode films for PEC water splitting cells have been mainly focused on synthesizing oxide semiconductors with wide band gaps, such as TiO2(3.2eV), WO3(2.8eV), and Fe2O3(2.3eV). Unfortunately, these pristine oxide photoanodes without any catalysts have relatively low photocurrent densities because of the inherent limitation of insufficient visible light absorption due to the wide bandgap. Specifically, there is a tradeoff between high photocurrent and photoelectrochemical corrosion behavior, which is representative of figures of meritf or PEC materials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.522-541
• /
• 2016

Network virtualization provides an effective way to overcome the Internet ossification problem. As one of the main challenges in network virtualization, virtual network embedding refers to mapping multiple virtual networks onto a shared substrate network. However, existing heuristic embedding algorithms evaluate the embedding potential of the nodes simply by the product of different resource attributes, which would result in an unbalanced embedding. Furthermore, ignoring the hops of substrate paths that the virtual links would be mapped onto may restrict the ability of the substrate network to accept additional virtual network requests, and lead to low utilization rate of resource. In this paper, we introduce and extend five node attributes that quantify the embedding potential of the nodes from both the local and global views, and adopt the technique for order preference by similarity ideal solution (TOPSIS) to rank the nodes, aiming at balancing different node attributes to increase the utilization rate of resource. Moreover, we propose a novel two-stage virtual network embedding algorithm, which maps the virtual nodes onto the substrate nodes according to the node ranks, and adopts a shortest path-based algorithm to map the virtual links. Simulation results show that the new algorithm significantly increases the long-term average revenue, the long-term revenue to cost ratio and the acceptance ratio.

• 대한화학회지
• /
• 제33권5호
• /
• pp.459-467
• /
• 1989

계면활성제가 수용액 중에 용해되면 용액내에서 micelle이라는 응집체를 형성하며, micelle은 그 내부에 oil를 용해시켜 swollen micelle을 형성하게 된다. 실제로 물-oil-계면활성계의 상평형도상에서 micelle과 swollen micelle은 동일영역에 존재하게 되나 일반적으로 micelle과 swollen micelle의 형성에 관해서는 서로 다른 관점으로 취급되어 왔다. 본 연구에서는 이러한 계면활성제 응집체의 형성에 관한 일관된 열역학적 모델을 제시하고자 한다. 모든 경우에 저농도 영역에서 이상용액 이론을 적용하였으며, micelle 형성에너지는 소수성 작용에너지와 계면에서의 표면에너지의 합으로 표시하였다. 이론식으로부터 임계마이셀농도, 평균응집분자수, 용해비 등을 예측하였으며 실험관측치와 비교하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.87-90
• /
• 2007

장기 체공 무인 항공기를 위한 연료 전지 동력 시스템을 개발하였다. 기존의 고압 수소 저장 방식의 문제점을 해결하기 위해 높은 에너지 밀도를 갖는 액상의 화학 수소화물을 연료로 사용하였다. 수소화물을 전환하여 수소를 발생하는 연료 공급 장치는 촉매 반응기, 펌프, 연료 카트리지, 분리기, 제어기로 구성되어 있으며, 전력을 발생하기 위한 연료전지 스택과 함께 연료 전지 동력 시스템을 무인 항공기에 탑재하였다. 연료 전지 동력 시스템을 무인 항공기에 적용하기 위한 성능 검증을 수행하였다.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.149-157
• /
• 1996

본 연구는 22개 지역에 대하여 임목수확 및 무육작업을 위한 임도개설순위를 결정하기 위하여, 다기준의사결정법중에 선호보정이 없는 모형인 최대최소법 및 최대최대법, 선호보정이 있는 모형인 단순가중치법, 계층가중치법 및 TOPSIS법의 적용성을 검토하였다. 그 결과 단순가중치법과 TOPSIS법이 임도개설순위의 결정에 적합한 것으로 판명되었다.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.199-207
• /
• 2008

Many logistics enterprises have made efforts to achieve low costly and high efficient logistics network. The cross-docking system can be a good solution for them. However, it requires tight schedule and all-night operation inevitably for realization of ideal cross-docking. These causes the difficulty of the attainment of daily delivery target and the leave of delivery service persons. In this paper, we develop the line-haul and shuttle service compromised cross-docking model in order to solve the problems practically. We apply the storage process with the cross-docking system and the direct cross-docking between line-haul and shuttle services. The simulation model validates the shorter delivery time by the developed model than the present model.