• 공업화학
• /
• 제16권1호
• /
• pp.93-100
• /
• 2005

두 종류의 4관능 폴리에스터 폴리올에 대해 trimellitic anhydride와 glycidyl metacrylate를 반응하여 두 종류의 8관능 광경화형 폴리에스터 폴리올 변성 하이퍼브랜치 메타아크릴레이트를 합성하고 광경화된 필름의 물성을 조사하였다. Thermogravimetric analyzer (TGA)로 측정한 UV 경화필름의 열안정성은 HBMA-2 (hyperbranched methacrylate-2)가 HBMA-1 (hyperbranched methacrylate-1)보다 우수하였다. 또한 HBMA-2가 HBMA-1보다 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서도 HBMA-2의 yellow index 값이 높은 결과를 보여주었다.

• 폴리머
• /
• 제29권6호
• /
• pp.575-580
• /
• 2005

하이드록시 말단의 지방족 고차가지구조 폴리에스테르를 용융축합법을 이용하여 합성하였다. 말단의 하이드록시 그룹을 acryloyl chloride를 사용하여 비닐 말단으로 변환시켰으며, 말단변화에 따른 구조를 분석하고 분자량을 측정하였다. 비닐 말단의 지방족 고차가지구조 폴리에스테르는 점도가 높고 노란색의 투명한 액체이며, 하이드록시 말단의 지방족 고차가지구조 폴리에스테르에 비해 유리전이온도가 낮았다. 또한 비닐 말단으로 변형한 후에는 열안정성이 감소하였으며, 말단 작용기의 전환율 차이에 의해 불규칙적인 열분해거동을 보였다.

• 공업화학
• /
• 제16권3호
• /
• pp.342-347
• /
• 2005

하이퍼브랜치 폴리올(HBP-16, 32, 64)과 acrylic acid로부터 광경화형 하이퍼브랜치 아크릴레이트를 합성하였고, 그 물성을 조사하였다. TGA로 측정한 UV 경화필름의 열안정성은 관능기 수가 증가할수록 좀더 높은 온도로 이동하였다. 또한 아크릴 레이트의 관능기 수가 증가할수록 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서는 아크릴레이트의 관능기수가 증가할수록 황변 지수 값이 증가하는 결과를 보여주었다.

• Macromolecular Research
• /
• 제8권3호
• /
• pp.142-146
• /
• 2000

Hyperbranched poly(ether sulfone) analogs with the 1,3,5-s-triazine moiety were prepared by the direct polymerization of AB$_2$type monomer, 2,4-bis(4-hydroxyphenyl)-6-(4-(4-(4-fluorobenzenesulfonyl)phenoxy)phenyl)-1,3,5-s-triazine (3). The selective reactivity of three chlorine atoms on cyanuric chloride toward nucleophiles provides an efficient route for the systematic synthesis of AB$_2$type triazine monomers and their hyperbranched polymers. The triazine rings influenced the structural and material characteristics of these hyperbranched polymers. The hyperbranched poly(ether sulfone) analog4 showed a glass transition at 295$^{\circ}C$. and was soluble in THF, 1,4-dioxane, and DMSO. An excellent thermal stability of polymer 4 was exhibited by a TGA analysis, which showed that 5% weight loss occurred at 480$^{\circ}C$.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.1-2
• /
• 2003

While aromatic polyimides and polyamides have found widespread use as high performance polymers, the present work addressed the need for organosoluble materials through the use of a hyperbranching scheme. The $AB_2$ monomers were prepared. The $AB_2$ monomers were then polymerized via aromatic fluoride-displacement and Yamazaki reactions to afford the corresponding hydroxyl-terminated hyperbranched polyimides (HT-PAEKI) and amine-terminated hyperbranched polyamides, respectively. HT-FAEKI was then functionalized with allyl and propargyl bromides as well as epichlorohydrin to afford allyl-terminated AT-PAEKI, propargyl-terminated PT-PAEKI, and epoxy (glycidyl)-terminated ET-PAEKI, in that order. All hyperbranched poly(ether-ketone-imide)s were soluble in common organic solvents. AT-PAEKI was blended with a bisphenol-A-based bismaleimide (BFA-BMI) in various weight ratios. Thermal, rheological, and mechanical properties of these blend systems were evaluated. Two characteristic hyperbranched polyamides, which the one has para-electron donating groups to the surface amine groups and the other has para-electron withdrawing groups to the surface amine groups, were selected to compare BMI curing behaviors. The electron rich polymer displayed ordinary Michael addition type exothermic reaction, while electron deficient polymer did display unusual curing behaviors. Based on analytical data, the later system provided the strong evidences to support room temperature curing of BMI by reactive intermediates instead of reactive primary amine groups on the macromolecule surface.

• 대한화학회지
• /
• 제43권4호
• /
• pp.393-400
• /
• 1999

Hyperbranched polymer를 이용한 나뭇가지꼴 카보실란 거대분자를 합성하였다 Hyperbranched polymer의 영세대 화합물의 합성은 $HSiMe_{3-n}$$(CH_2CH=CH_2)_n$(n=2; $AB_2$,3;$AB_3$형)의 수소화규소첨가반응 방법을 이용하여 합성하였다. Hyperbranched polymer $AB_2$와 $AB_3$형 고분자 화합물은 수소화규소첨가반응과 알켄첨가반응에 의해 Gn+1형 나뭇가지꼴 거대분자로 성장하였다. Gn+2P세대 화합물은 $HSiMeCl_2$와의 수소화규소첨가반응 방법에 의해 모든 가지가 동일형 화합물을 형성하지 못했다. Gn과 Gn+1형 고분자 화합물은 9-BBN과의 반응과 반응생성물의 산화반응에 의해서 polysilol을 형성하였다. 반응의 정도는 NMR에 의해서 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.163-168
• /
• 2009

Hyperbranched conjugated polymers (p-HPPV and m-HPPV) with para and meta linkages were synthesized from $A_2$ and $B_4$ type monomers through Wittig polycondensation. The synthesized p-HPPV and m-HPPV were completely soluble in common organic solvents such as chloroform, tetrahydrofuran, 1,2-dichloroethane, etc. and thermal gravimetric analyses showed that p-HPPV and m-HPPV are stable up to $350^{\circ}C$. The molecular weights (from GPC), UV-visible, and photoluminescence maximum peaks of p-HPPV and m-HPPV are characterized in detail. The fabricated EL devices using the synthesized hyperbranched polymers, (ITO/(p-HPPV or m-HPPV)/Al), showed EL emission at about 507 nm and 481 nm (681 nm), respectively. Especially, EL device from m-HPPV were found to exhibit nearly white emission with approximate CIE coordinates of (0.31, 0.34) compared with (0.310, 0.316) of NTSC white color at $100\;cd/m^2$. The good photophysical properties combine with good film-form ability could make these hyperbranched polymers to be a potential candidate for the EL materials.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.97-98
• /
• 2006

After general introduction for hyperbranched polymers, hyperbranched polysiloxysilanes (HBPS) were introduced as new functional polymers. Vinyl terminated HBPS was synthesized starting from AB2 type monomer by hydrosilylation reaction. Vinyl group can be converted various functional groups such as carboxylic acid and alcohol. HBPS had strong interaction to inorganic surface. As an example of this phenomenon, silica gel bead for HPLC was modified with thermo sensitive polymers. The resulting bead was successfully applied to Green Chronatography.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.195-195
• /
• 2006

A superior electrophilic substitution reaction medium that is non-toxic, relatively less corrosive, and non-volatile electrophilic substitution reaction to afford high molecular weight linear and hyperbranched polyetherketones (PEK' s) was developed. The system has very strong driving force to give extra ordinary high molecular weight linear and hyperbranched PEK' s. The reaction medium was further extended to prepare various types of copolymers and covalently grafted polymers onto carbon nanotube (CNT) or carbon nanofiber (CNF). By using characteristic hydrophilic nature of the reaction medium, hyperbranched PEK' s could be synthesized from commercially available $A_3\;+\;B_2$ monomers without network formation via selective solubility of the monomers.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.272-286
• /
• 2006

Dendritic hyperbranched poly(methyl methacrylate)s (PMMA)s, whose branched architectures resemble the 'dendron' part(s) of dendrimer, were synthesized by an iterative methodology consisting of two reactions in each iteration process: (a) a coupling reaction of u-functionalized, living, anionic PMMA having two tert-butyldimethylsilyloxymethylphenyl(SMP) groups with benzyl bromide(BnBr)-chain-end-functionalized PMMA, and (b) a transformation reaction of the introduced SMP groups into BnBr functionalities. These two reactions, (a) and (b), were repeated three times to afford a series of dendron-like, hyperbranched (PMMA)s up to third generation. Three dendron-like, hyperbranched (PMMA)s different in branched architecture were also synthesized by the same iterative methodology using a low molecular weight, functionalized 1,1-diphenylalkyl anion prepared from sec-BuLi and 1,1-bis(3-tert-butyldime-thylsilyloxymethylphenyl)ethylene in the reaction step (b) in each iterative process. Furthermore, structurally similar, dendron-like, hyperbranched block copolymers could be successfully synthesized by the iterative methodology using $\alpha$-functionalized, living, anionic poly(2-(perfluorobutyl) ethyl methacrylate) (PRfMA) in addition to $\alpha$-functionalized, living PMMA. Accordingly, the resulting block copolymers were comprised of both PMMA and PRfMA segments with different sequential orders. After the block copolymers were cast into films and annealed, their surface structures were characterized by angle-dependent XPS and contact angle measurements. All three samples showed significant segregation and enrichment of PRfMA segments at the surfaces.